NASA's Wide-field Infrared Survey Explorer (WISE; Wright et al. 2010) mapped the sky at 3.4, 4.6, 12, and 22 μm (W1, W2, W3, W4) in 2010 with an angular resolution of 6.1", 6.4", 6.5", & 12.0" in the four bands. WISE achieved 5σ point source sensitivities better than 0.08, 0.11, 1 and 6 mJy in unconfused regions on the ecliptic in the four bands. Sensitivity improves toward the ecliptic poles due to denser coverage and lower zodiacal background.The All-Sky Release includes all data taken during the WISE full cryogenic mission phase, 7 January 2010 to 6 August 2010, that were processed with improved calibrations and reduction algorithms. Release data products include an Atlas of 18,240 match-filtered, calibrated and coadded image sets, a Source Catalog containing positional and photometric information for over 563 million objects detected on the WISE images, and an Explanatory Supplement that is a guide to the format, content, characteristics and cautionary notes for the WISE All-Sky Release products.The WISE All-Sky Data Release Single-exposure Source Working Database contains positions and brightness information, uncertainties, time of observation and assorted quality flags for 9,479,433,101 "sources" detected on the individual WISE 7.7s (W1 and W2) and 8.8s (W3 and W4) Single-exposure images. Because WISE scanned every point on the sky multiple times, the Single-exposure Database contains multiple, independent measurements of objects on the sky.Entries in the Single-exposure Source Table include detections of real astrophysical objects, as well as spurious detections of low SNR noise excursions, transient events such as hot pixels, charged particle strikes and satellite streaks, and image artifacts light from bright sources including the moon. Many of the unreliable detections are flagged in the Single-exposure Table, but they have not been filtered out as they were for the Source Catalog. Therefore, the Table must be used with caution. Users are strongly encouraged to read the Cautionary Notes before using the Table.

This table contains the catalog of high Galactic-latitude (|b| > 10^o) X-ray sources detected in the first 37 months of data accumulation of the Monitor of All-sky X-ray Image/Gas Slit Camera (MAXI/GSC). To achieve the best sensitivity, the authors developed a background model of the GSC that well reproduced the data based on the detailed on-board calibration. Source detection was performed through image fits with a Poisson likelihood algorithm. The catalog contains 500 objects detected with significances >= 7 in the 4-10 keV band. The limiting sensitivity is ~7.5 x 10^-12 erg cm^-2 s^-1 ( ~0.6 mCrab) in the 4-10 KeV band for 50% of the survey area, which is the highest ever achieved in an all-sky survey mission covering this energy band. In their paper, the authors summarize the statistical properties of the catalog and results from cross-matching with the Swift/BAT 70-month catalog (BAT70), the meta-catalog of X-ray detected clusters of galaxies (MCXC), and the MAXI/GSC 7-month catalog (GSC7). This catalog lists the source name (2MAXI), the position and its error, the detection significances and fluxes in the 4-10 keV and 3-4 keV bands, the hardness ratio, and the basic information on the likely counterpart (the latter available for 296 of the sources). This table was created by the HEASARC in September 2013 based on the electronic version of Table 1 from the reference paper which was obtained from The ApJS web site. This is a service provided by NASA HEASARC .

The NASA/NOAA Suomi National Polar-orbiting Partnership (Suomi NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) Bidirectional Reflectance Distribution Function (BRDF) and Albedo Valid Observation Band M5 product (VNP43D46) is produced daily using 16 days of data at 30 arc second (1,000 meter) resolution. Data are temporally weighted to the ninth day, which is reflected in the file name. The VNP43D product suite is provided in a Climate Modeling Grid (CMG), which covers the entire globe for use in climate simulation models. Due to the large file size, each VNP43D product contains just one data layer for each of the parameters included in the [VNP43MA2](https://doi.org/10.5067/VIIRS/VNP43MA2.001) product. VNP43D40 through VNP43D53 are the 30 arc second BRDF/Albedo Quality values, the Local Solar Noon values, the Valid Observations of the moderate resolution bands (M1 through M5, M7, M8, M10, and M11) plus the Day/Night Band (DNB), the Snow Status, and the Uncertainty. Details regarding methodology are available on the [VNP43MA2](https://doi.org/10.5067/VIIRS/VNP43MA2.001) product page and in the Algorithm Theoretical Basis Document (ATBD). VNP43D46 contains the valid observation quality layer representing each of the 16 days of the retrieval period for VIIRS band M5.Known Issues* The abnormally high activation of the high aerosol flag in the Collection 1 (C1) VNP09 product has impacted downstream products. The VNP43 BRDF/Albedo/NBAR product is affected by reducing the number of otherwise acceptable observations used as input to characterize surface anisotropy. This effect (most obvious over arid bright surfaces), results in a reduced number of high quality full BRDF model inversions. Therefore, users should be aware that bright arid surfaces (normally associated with high quality BRDF/Albedo/NBAR retrievals) are likely to be somewhat represented by lower quality results in C1. VNP09 has been corrected for Collection 2 (C2). Therefore, users should avoid substantive use of C1 VNP43 over arid regions (and wait for C2 products). In any event, users are **always strongly encouraged** to download and use the extensive QA data provided in VNP43[I-M]A2, in addition to the briefer mandatory QA provided as part of the VNP43[I-M]A1, 3 and 4 products.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=VIIRS).