The ISC2010_TOP_OF_BANK line features represent the leveled left and right banks of the river channel. The bank lines have been leveled to the height of lower bank. This data set represents full River Reaches. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC_BANKFULL_WIDTH_S table is the Statistical Summary table for the Bankfull Width metric at the 100m Section level. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_STREAMBED_WIDTH polygon features represent the width between the Toe of each opposing bank for each River Reach. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_BANKFULL_WIDTH_R polygon features represent the width between the top of the lowest bank and the corresponding height on the opposite bank for each River Reach. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC_STREAMBED_WIDTH_S table is the Statistical Summary table for the Streambed Width metric at the 100m Section level. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_BANK_CONDITION_S table is the Statistical Summary table for the Bank Condition Metric at the 100m Section level. The Bank Condition Metric is an assessment of the proportion of the bank face that is eroding above expected rates. The ISC2010_BANK_CONDITION_S table is designed to JOIN to the ISC2010_RIVER_CENTRELINES_S feature class. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_BARE_GROUND polygon features represent the parts of the assessed bank face that do not have vegetation cover. The bank face is defined as the area between the Top and Toe of the bank. Areas of Bare Ground less than 5m2 have been removed so that data volume is manageable. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_BANK_CONDITION_R table is the Statistical Summary table for the Bank Condition Metric at the Reach level. The Bank Condition Metric is an assessment of the proportion of the bank face that is eroding above expected rates. The ISC2010_BANK_CONDITION_R table is designed to JOIN to the ISC2010_RIVER_CENTRELINES_R feature class. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_BARE_GROUND_S table is the Statistical Summary table for the Bare Ground Metric at the 100m Section level. The ISC2010_BARE_GROUND_S table is designed to JOIN to the ISC2010_RIVER_CENTRELINES_S feature class. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.

The ISC2010_WATER_BODIES polygon features represent the areas of the stream bed that contained water at the time of the survey. Water body features less than 5m2 have been removed so that data volume is manageable. River condition in Victoria is assessed every 5 years using the Index of Stream Condition (ISC). The Department of Environment and Primary Industries (DEPI) developed a methodology to assess the Physical Form and Riparian Vegetation components of the ISC using remote sensing data, specifically LIDAR and aerial photography. A State Wide mapping project was undertaken in 2010-13 to accurately map the Physical Form and Riparian Vegetation metrics of the ISC . Other ISC metrics were not assessed in the project and were derived from other sources. The Physical Form and Riparian Vegetation Metric products are a combination of mapped Vector and Raster data as well as Tabular Summary Statistics about the mapped features. In the context of the project, the term Metrics is used to refer to both the mapped features and the summary statistics. Remote sensing data used includes 15cm true colour and infra-red aerial photography and four return multi-pulse LiDAR data. This source data was used to derive a variety of Raster data sets including Digital Terrain Models, Slope, Vegetation Height and Vegetation Cover. The Digital Terrain and Slope rasters were used to map Physical Form metrics including Stream Bed, Top of Bank and River Centre Lines while the Vegetation Height and Cover rasters were used to map the Riparian Vegetation metrics. The Project Report "Aerial Remote Sensing for Physical Channel Form and Riparian Vegetation Mapping" describes the remote sensing and mapping approach used to create this data set.