TERN worked together with Airborne Research Australia (ARA) to deliver airborne hyperspectral and lidar data for a number of selected homogenous 5 km x 5 km field sites across several locations in Australia (formally known as the AusCover Supersites). A Riegl Q560 Lidar, a SPECIM AisaEAGLE II hyperspectral scanner (VNIR) and a SPECIM AisaHAWK hyper-spectral scanner were mounted in underwing pods of ARA's ECO-Dimona research aircraft VH-EOS, each one together with its own navigation and altitude system. The spatial resolution of the Airborne hyperspectral data is 0.5m and Airborne LiDAR is 0.3m. Details on the data acquisition for each site is summarized here.

Field spectroradiometer measurements have been collected at several locations across Australia (formally known as the AusCover Supersites) to relate field based measurements to satellite data products, such as Landsat and MODIS NBAR products. Collected in collaboration with multiple government and research-based institutions.

On the 18th of September 2008 a hyper-spectral scanner (AISA+ Airborne Hyperspectral System from Specim - Spectral Imaging Ltd.) collected data from part of the Kimberley (Montgomery Reef). The thumbnail shows flight lines. Further information can be obtained through contacts listed below.

This terrestrial LiDAR dataset captures detailed vegetation structural information at the Fletcherview Tropical Rangeland SuperSite, located 50km west of Townsville, Queensland, Australia. The purpose of this data is to enhance understanding of vegetation dynamics and ecosystem function in the region. The dataset is part of a broader collection of Terrestrial LiDAR data acquired from all TERN SuperSites, aimed at achieving a standardized and highly detailed capture of 3D vegetation structure across Australia.

This dataset is a collection of drone lidar data from plots across Australia (AusPlots, SuperSites, Cal/Val sites to be established in the future). The aim of these drone surveys is to capture vegetation structure. The standardised data collection and data processing protocols developed in 2022 are based on the DJI Matrice 300 (M300) RTK drone platform. Lidar sensor DJI Zenmuse L1 is used with DJI Matrice 300 (M300) RTK platform to capture RGB colourised 3D point clouds. The data is georeferenced using the onboard GNSS in M300 and the D-RTK 2 base station. DJI Terra software was used to generate 3D point clouds from the raw lidar data. The protocols include flight planning and data collection guidelines for a 100 x 100 m TERN plot, and the processing workflow used on DJI Terra. Mission-specific metadata for each plot is provided in the imagery/metadata folder (please refer to the imagery collection). The Drone Data Collection and Lidar Processing protocols can be found at https://www.tern.org.au/field-survey-apps-and-protocols/ .

This terrestrial LiDAR dataset captures detailed vegetation structural information at the Cumblerland Plain Woodland SuperSite in Western Sydney, Australia. The purpose of this data is to enhance understanding of vegetation dynamics and ecosystem function in the region. The dataset is part of a broader collection of Terrestrial LiDAR data acquired from all TERN SuperSites, aimed at achieving a standardized and highly detailed capture of 3D vegetation structure across Australia.

On the 21st of September 2008 a hyper-spectral scanner (AISA+ Airborne Hyperspectral System from Specim - Spectral Imaging Ltd.) collected data from part of the Kimberley (Packer Island and Perpendicular Head). The thumbnail shows flight lines. Further information can be obtained through contacts listed below.

This terrestrial LiDAR dataset captures detailed vegetation structural information at the Litchfield Savanna SuperSite in NT, Australia. The purpose of this data is to enhance understanding of vegetation dynamics and ecosystem function in the region. The dataset is part of a broader collection of Terrestrial LiDAR data acquired from all TERN SuperSites, aimed at achieving a standardized and highly detailed capture of 3D vegetation structure across Australia.

This terrestrial LiDAR dataset captures detailed vegetation structural information at the Tumbarumba Wet Eucalypt site in the Bago State Forest, New South Wales, Australia. The purpose of this data is to enhance understanding of vegetation dynamics and ecosystem function in the region. The dataset is part of a broader collection of Terrestrial LiDAR data acquired from all TERN SuperSites, aimed at achieving a standardized and highly detailed capture of 3D vegetation structure across Australia.