This dataset presents information from 2016 at the household level; the percentage of households within each Index of Household Advantage and Disadvantage (IHAD) quartile for Statistical Area Level 1 (SA1) 2016 boundaries. The IHAD is an experimental analytical index developed by the Australian Bureau of Statistics (ABS) that provides a summary measure of relative socio-economic advantage and disadvantage for households. It utilises information from the 2016 Census of Population and Housing. IHAD quartiles: All households are ordered from lowest to highest disadvantage, the lowest 25% of households are given a quartile number of 1, the next lowest 25% of households are given a quartile number of 2 and so on, up to the highest 25% of households which are given a quartile number of 4. This means that households are divided up into four groups, depending on their score. This data is ABS data (catalogue number: 4198.0) used with permission from the Australian Bureau of Statistics. For more information please visit the Australian Bureau of Statistics. Please note: AURIN has spatially enabled the original data. AURIN has calculated the number of households for each IHAD quartile based on the Occupied Private Dwellings count and the percentage of households in each quartile. These calculated columns have been appended to the original dataset. A household is defined as one or more persons, at least one of whom is at least 15 years of age, usually resident in the same private dwelling. All occupants of a dwelling form a household. For Census purposes, the total number of households is equal to the total number of occupied private dwellings (Census of Population and Housing: Census Dictionary, 2016 cat. no. 2901.0). IHAD output has been confidentialised to meet ABS requirements. In line with standard ABS procedures to minimise the risk of identifying individuals, a technique has been applied to randomly adjust cell values of the output tables. These adjustments may cause the sum of rows or columns to differ by small amounts from table totals.

This dataset presents information from 2016 at the household level; the percentage of households within each Index of Household Advantage and Disadvantage (IHAD) quartile for Statistical Area Level 3 (SA3) 2016 boundaries. The IHAD is an experimental analytical index developed by the Australian Bureau of Statistics (ABS) that provides a summary measure of relative socio-economic advantage and disadvantage for households. It utilises information from the 2016 Census of Population and Housing. IHAD quartiles: All households are ordered from lowest to highest disadvantage, the lowest 25% of households are given a quartile number of 1, the next lowest 25% of households are given a quartile number of 2 and so on, up to the highest 25% of households which are given a quartile number of 4. This means that households are divided up into four groups, depending on their score. This data is ABS data (catalogue number: 4198.0) used with permission from the Australian Bureau of Statistics. For more information please visit the Australian Bureau of Statistics. Please note: AURIN has generated this dataset through aggregating the original SA1 level data (with calculated number of households/quartile) to SA3 level. The number of occupied private dwellings, and number of households in each of the IHAD quartiles for each SA3 were calculated by aggregating the values of each of those specified columns from the SA1 dataset. Percentages of households in each of the IHAD quartiles were calculated for each SA3 from these aggregated totals. A household is defined as one or more persons, at least one of whom is at least 15 years of age, usually resident in the same private dwelling. All occupants of a dwelling form a household. For Census purposes, the total number of households is equal to the total number of occupied private dwellings (Census of Population and Housing: Census Dictionary, 2016 cat. no. 2901.0). IHAD output has been confidentialised to meet ABS requirements. In line with standard ABS procedures to minimise the risk of identifying individuals, a technique has been applied to randomly adjust cell values of the output tables. These adjustments may cause the sum of rows or columns to differ by small amounts from table totals.

This data is SA1 based SEIFA data on The Index of Relative Socio-economic Disadvantage, 2016. Data is based upon 2016 ASGS boundaries. Socio-Economic Indexes for Areas (SEIFA) is an ABS product that ranks areas in Australia according to relative socio-economic advantage and disadvantage. The indexes are based on information from the five-yearly Census of Population and Housing. SEIFA 2016 has been created from Census 2016 data and consists of four indexes: The Index of Relative Socio-economic Disadvantage (IRSD); The Index of Relative Socio-economic Advantage and Disadvantage (IRSAD); The Index of Education and Occupation (IEO); The Index of Economic Resources (IER). Each index is a summary of a different subset of Census variables and focuses on a different aspect of socio-economic advantage and disadvantage. This data is ABS data (catalogue number: 2033.0.55.001) used with permission from the Australian Bureau of Statistics. For more information on this data please visit the Australian Bureau of Statistics.

This data is Statistical Local Areas (SLA) based Socio-Economic Indexes for Areas (SEIFA) Index of Advantage/Disadvantage (IRSAD) - Is a continuum of advantage to disadvantage. Low values indicate areas of disadvantage; and high values indicate areas of advantage. This data is based on the 2006 census and follows the 2006 Australian Standard Geographical Classification (ASGC) boundaries. The Australian Bureau of Statistics (ABS) has developed indexes to allow ranking of regions/areas, providing a method of determining the level of social and economic wellbeing in that region. There are four indexes included in the SEIFA 2006 product. They relate to socio-economic aspects of geographic areas. Each index summarises a different aspect of the socio-economic conditions in an area. The indexes have been obtained by a technique called principal components analysis. This technique summarises the information from a variety of social and economic variables, calculating weights that will give the best summary for the underlying variables. For the SEIFA indexes, each index uses a different set of underlying variables. All the indexes (including the Index of Relative Socio-Economic Disadvantage) have been constructed so that relatively disadvantaged areas (e.g. areas with many low income earners) have low index values. This data is ABS data (catalogue number: 2033.0.55.001) used with permission from the Australian Bureau of Statistics. For more information on this data please visit the Australian Bureau of Statistics.Please note: AURIN has spatially enabled the original data following the 2006 ASGC.

Local Government Area (LGA) based data for Individual Income (Annual), from the Australian Bureau of Statistics (ABS) 1986 Census of Population and Housing. Census counts were based on place of usual residence which excludes overseas visitors, Australians overseas, and adjustments for under-enumeration. The data is by LGA 1986 boundaries. Periodicity: 5-Yearly. This data is used with permission from the ABS. The tabular data was supplied to AURIN by the Australian Data Archives. The cleaned, high resolution 1986 geographic boundaries (cat. no. 1261.0.30.001) are available from Data.gov.au. For more information please refer to the 1986 Census Dictionary (cat. no. 2102.0).

LGA based data for Selected Medians and Averages, for 2016 Census. The median or average was calculated in the following categories: a person’s age, a person’s income, total household income, mortgage repayment, rental payments, number of persons per bedroom, household size and proportion of dwellings in need of one or more extra bedrooms. The data is by LGA 2016 boundaries. Periodicity: 5-Yearly. For more information visit the data source: http://www.abs.gov.au/census.

This dataset presents information about total income distribution. The data covers the financial year of 2016-2017, and is based on Local Government Areas (LGA) according to the 2016 edition of the Australian Statistical Geography Standard (ASGS). Total Income is the sum of all reported income derived from Employee income, Own unincorporated business, Superannuation, Investments and Other income. Total income does not include the non-lodger population. Government pensions, benefits or allowances are excluded from the Australian Bureau of Statistics (ABS) income data and do not appear in Other income or Total income. Pension recipients can fall below the income threshold that necessitates them lodging a tax return, or they may only receive tax free pensions or allowances. Hence they will be missing from the personal income tax data set. Recent estimates from the ABS Survey of Income and Housing (which records Government pensions and allowances) suggest that this component can account for between 9% to 11% of Total income. All monetary values are presented as gross pre-tax dollars, as far as possible. This means they reflect income before deductions and loses, and before any taxation or levies (e.g. the Medicare levy or the temporary budget repair levy) are applied. The amounts shown are nominal, they have not been adjusted for inflation. The income presented in this release has been categorised into income types, these categories have been devised by the ABS to closely align to ABS definitions of income. The statistics in this release are compiled from the Linked Employer Employee Dataset (LEED), a cross-sectional database based on administrative data from the Australian taxation system. The LEED includes more than 120 million tax records over seven consecutive years between 2011-12 and 2017-18. Please note: All personal income tax statistics included in LEED were provided in de-identified form with no home address or date of birth. Addresses were coded to the ASGS and date of birth was converted to an age at 30 June of the reference year prior to data provision. To minimise the risk of identifying individuals in aggregate statistics, perturbation has been applied to the statistics in this release. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics, while maximising the range of information that can be released. These adjustments have a negligible impact on the underlying pattern of the statistics. Some cells have also been suppressed due to low counts. Totals may not align with the sum of their components due to missing or unpublished information in the underlying data and perturbation. For further information please visit the Australian Bureau of Statistics. AURIN has made the following changes to the original data: Spatially enabled the original data. Set 'np' (not published to protect the confidentiality of individuals or businesses) values to Null.

This dataset presents information about total income distribution. The data covers the financial year of 2014-2015, and is based on Local Government Areas (LGA) according to the 2016 edition of the Australian Statistical Geography Standard (ASGS). Total Income is the sum of all reported income derived from Employee income, Own unincorporated business, Superannuation, Investments and Other income. Total income does not include the non-lodger population. Government pensions, benefits or allowances are excluded from the Australian Bureau of Statistics (ABS) income data and do not appear in Other income or Total income. Pension recipients can fall below the income threshold that necessitates them lodging a tax return, or they may only receive tax free pensions or allowances. Hence they will be missing from the personal income tax data set. Recent estimates from the ABS Survey of Income and Housing (which records Government pensions and allowances) suggest that this component can account for between 9% to 11% of Total income. All monetary values are presented as gross pre-tax dollars, as far as possible. This means they reflect income before deductions and loses, and before any taxation or levies (e.g. the Medicare levy or the temporary budget repair levy) are applied. The amounts shown are nominal, they have not been adjusted for inflation. The income presented in this release has been categorised into income types, these categories have been devised by the ABS to closely align to ABS definitions of income. The statistics in this release are compiled from the Linked Employer Employee Dataset (LEED), a cross-sectional database based on administrative data from the Australian taxation system. The LEED includes more than 120 million tax records over seven consecutive years between 2011-12 and 2017-18. Please note: All personal income tax statistics included in LEED were provided in de-identified form with no home address or date of birth. Addresses were coded to the ASGS and date of birth was converted to an age at 30 June of the reference year prior to data provision. To minimise the risk of identifying individuals in aggregate statistics, perturbation has been applied to the statistics in this release. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics, while maximising the range of information that can be released. These adjustments have a negligible impact on the underlying pattern of the statistics. Some cells have also been suppressed due to low counts. Totals may not align with the sum of their components due to missing or unpublished information in the underlying data and perturbation. For further information please visit the Australian Bureau of Statistics. AURIN has made the following changes to the original data: Spatially enabled the original data. Set 'np' (not published to protect the confidentiality of individuals or businesses) values to Null.

This dataset presents information about total income distribution. The data covers the financial year of 2013-2014, and is based on Local Government Areas (LGA) according to the 2016 edition of the Australian Statistical Geography Standard (ASGS). Total Income is the sum of all reported income derived from Employee income, Own unincorporated business, Superannuation, Investments and Other income. Total income does not include the non-lodger population. Government pensions, benefits or allowances are excluded from the Australian Bureau of Statistics (ABS) income data and do not appear in Other income or Total income. Pension recipients can fall below the income threshold that necessitates them lodging a tax return, or they may only receive tax free pensions or allowances. Hence they will be missing from the personal income tax data set. Recent estimates from the ABS Survey of Income and Housing (which records Government pensions and allowances) suggest that this component can account for between 9% to 11% of Total income. All monetary values are presented as gross pre-tax dollars, as far as possible. This means they reflect income before deductions and loses, and before any taxation or levies (e.g. the Medicare levy or the temporary budget repair levy) are applied. The amounts shown are nominal, they have not been adjusted for inflation. The income presented in this release has been categorised into income types, these categories have been devised by the ABS to closely align to ABS definitions of income. The statistics in this release are compiled from the Linked Employer Employee Dataset (LEED), a cross-sectional database based on administrative data from the Australian taxation system. The LEED includes more than 120 million tax records over seven consecutive years between 2011-12 and 2017-18. Please note: All personal income tax statistics included in LEED were provided in de-identified form with no home address or date of birth. Addresses were coded to the ASGS and date of birth was converted to an age at 30 June of the reference year prior to data provision. To minimise the risk of identifying individuals in aggregate statistics, perturbation has been applied to the statistics in this release. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics, while maximising the range of information that can be released. These adjustments have a negligible impact on the underlying pattern of the statistics. Some cells have also been suppressed due to low counts. Totals may not align with the sum of their components due to missing or unpublished information in the underlying data and perturbation. For further information please visit the Australian Bureau of Statistics. AURIN has made the following changes to the original data: Spatially enabled the original data. Set 'np' (not published to protect the confidentiality of individuals or businesses) values to Null.