Australia's Land Borders is a product within the Foundation Spatial Data Framework (FSDF) suite of datasets. It is endorsed by the ANZLIC – the Spatial Information Council and the Intergovernmental Committee on Surveying and Mapping (ICSM) as the nationally consistent representation of the land borders as published by the Australian states and territories. It is topologically correct in relation to published jurisdictional land borders and the Geocoded National Address File (G-NAF). The purpose of this product is to provide: (i) a building block which enables development of other national datasets; (ii) integration with other geospatial frameworks in support of data analysis; and (iii) visualisation of these borders as cartographic depiction on a map. Although this service depicts land borders, it is not nor does it suggests to be a legal definition of these borders. Therefore it cannot and must not be used for those use-cases pertaining to legal context.

Australia's Land Borders is a product within the Foundation Spatial Data Framework (FSDF) suite of datasets. It is endorsed by the ANZLIC – the Spatial Information Council and the Intergovernmental Committee on Surveying and Mapping (ICSM) as the nationally consistent representation of the land borders as published by the Australian states and territories. It is topologically correct in relation to published jurisdictional land borders and the Geocoded National Address File (G-NAF). The purpose of this product is to provide: (i) a building block which enables development of other national datasets; (ii) integration with other geospatial frameworks in support of data analysis; and (iii) visualisation of these borders as cartographic depiction on a map. Although this service depicts land borders, it is not nor does it suggests to be a legal definition of these borders. Therefore it cannot and must not be used for those use-cases pertaining to legal context.

Generalised 250k coastline overview of Western Australia depicting the MHWM, based on AUSLIG AMBIS 1:100 000 and improved with best available information from large scale (1:2 000 and 1:5 000) and medium scale (1:25 000 and 1:50 000) capture scale datasets. © Western Australian Land Information Authority (Landgate). Use of Landgate data is subject to Personal Use License terms and conditions unless otherwise authorised under approved License terms and conditions.

This data set shows designated and actual irrigation areas in Australia compiled by the National Land Use Mapping Project of the National Land and Water Resources Audit to assist in the identification of irrigation areas in Australia. Additional data custodians include Agriculture WA, Queensland Department of Natural Resources and Mines, Murray-Darling Basin Commission, New South Wales Department of Land and Water Conservation and Tasmanian Department of Primary Industries, Water and Environment Designated irrigation areas indicate areas with administratively defined boundaries which have associated rights and obligations pertaining to use of water for irrigation. The precise meaning of the term designated irrigation area varies from region to region. aActual irrigation areasa indicate areas with observationally defined boundaries within which irrigation is practised. The boundaries have been supplied by various agencies and cover the more important irrigation areas in Australia. Users of this data set should be aware that there are irrigated areas outside the designated and actual areas shown and that there are non-irrigated areas inside them. This is particularly true of Tasmania and the Murray-Darling Basin.The data set is available in both vector and raster formats. The raster data set can be used as a companion to the 1996/97 Land Use of Australia data set which is also in raster format. Both data sets have the same coordinate system, boundary coordinates and cell size so that they can easily be overlaid. Users may find, however, that some cells are classified as irrigated by the Australian Irrigation Areas data set and as non-agricultural land by the 1996/97 Land Use of Australia data set.The Version 1a data set may be of use to researchers and policy makers in need of national, regional or local scale irrigation data, though the scale of the source material is highly variable and completness of coverage is poor in some regions. See [further metadata](http://data.daff.gov.au/anrdl/metadata_files/pa_aia__r9ab __00211a02.xml) for more detail. Lineage: The data set was constructed in vector format by appending irrigation area boundary data sets supplied by various agencies. The component data sets are listed below. One of the component data sets which was supplied as separate tiles in ArcView shapefile format was assembled into a single shapefile data set in ArcView 3.1. All other processing was carried out in ARC/INFO 7.2.1 under SunOS using double precision coordinates. For all operations in which processing used a fuzzy tolerance, the value specified was 0.00001 degrees (about 1 m). The raster form of the data set was made from the vector form. 1) Ord River Scheme, Stage 1, irrigation area boundaries. This data set was supplied by Agriculture WA in ArcView shapefile format.2) Boundary of Gazetted Irrigation Areas in Queensland. This data set was supplied by the Queensland Department of Natural Resources and Mines in ARC/INFO export file format. It shows designated irrigation areas. The coordinate datum is not known with certainty and was assumed to be the Australian Geodetic Datum 1984.3) Northern Murray-Darling Basin irrigation area boundaries. This data set was supplied by the Murray-Darling Basin Commission in ARC/INFO export file format. It shows actual irrigation areas, based on interpretation of coarse scale imagery derived from Landsat TM images. The data set comprises 11 polygons. Of these, five have not been retained in the national data set because they largely coincide with the much higher resolution polygons of the Northern New South Wales Cotton Development data set. A sixth has not been retained because it proves to be almost entirely covered by a national park and a perennial lake. One of the polygons that was retained was edited to give precedence to a higher resolution polygon in the Boundary of Gazetted Irrigation Areas in Queensland data set which it partly overlies.4) Northern New South Wales Cotton

The Tasmanian land use 2015 spatial data set is produced at catchment scale which is undertaken through the Australian Collaborative Land Use and Management Program (ACLUMP) using standards set out in the 'Guidelines for land use mapping in Australia: principals, procedures and definitions, 4th edition 2011' and âAddendum to the Guidelines for land use mapping in Australia: principles, procedures and definition, 4th Editionâ. Land use is classified by its prime use using a hierarchical structure, Australian Land Use and Management Classification (ALUMC) v8, which allows attribution as broad classes to individual commodities. This produces nationally consistent land use mapping to plan for and achieve productive agriculture and prosperous regional communities. Land use information shows how we use the landscape, whether that is for food production, forestry, nature conservation, water storage or urban development. The data set has been derived through spatial analysis of ancillary data sets, interpretation from imagery (Google Earth, State Orthophoto and Landsat composite) and expert knowledge through stakeholder engagements. The development of a modelling process to create the data set allows a repeatable process for future iterations of land use mapping. The land use mapping coverage is available for mixed dates at a scale that varies according to the intensity of land use activities and landscape context. This iteration of land use mapping is for improved biosecurity outcomes to improve biosecurity risk management and emergency disease preparedness through updated land use mapping of horticulture and intensive animal production. Land use mapping is completed to the secondary and tertiary level with commodity information for priority land use classes focusing on dairy grazing, sheds and yards, vineyards, stock aggregation points and nurseries. Australian Land Use and Management Classification (ALUMC) v8 comprises of five primary classes, identified in order of increasing levels of intervention or potential impact on the natural landscape. Water is included separately as a sixth primary class. Primary and secondary levels relate to the principal land use. Tertiary classes may include additional information on commodity groups, specific commodities, land management practices or vegetation information. The primary, secondary and tertiary codes work together to provide increasing levels of detail about the land use. Land may be subject to a number of concurrent land uses. For example, while the main management objective of a multiple-use production forest may be timber production, it may also provide conservation, recreation, grazing and water catchment land uses. In these cases, production forestry is commonly identified in the ALUM code as the prime land use. The primary classes of land use in the ALUM Classification are: 1. Conservation and natural environments - land used primarily for conservation purposes, based on maintaining the essentially natural ecosystems present 2. Production from relatively natural environments - land used mainly for primary production with limited change to the native vegetation 3. Production from dryland agriculture and plantations - land used mainly for primary production based on dryland farming systems 4. Production from irrigated agriculture and plantations - land used mostly for primary production based on irrigated farming 5. Intensive uses - land subject to extensive modification, generally in association with closer residential settlement, commercial or industrial uses 6. Water - water features (water is regarded as an essential aspect of the classification, even though it is primarily a land cover type, not a land use)

This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied and contains boundary and attribute information for parcels of public, private and Aboriginal lands in Australia. Data are sourced primarily from government gazette notices, cadastral maps and plans. A nominal scale of around 1:5 million and a minimum 50 square kilometre threshold limit for land parcels was used in the generalisation of this product from the National Public and Aboriginal Lands data. Data is suitable for GIS applications. This map shows public and private land tenure, including Indigenous land for the whole of Australia at a scale of 1:4.7 million. The land tenure boundaries depicted on this map generally define broadly classified areas greater than 50 square kilometres. Indigenous land areas between 0.1 and 100 square kilometres are shown more comprehensively by symbols. The information on this map is complemented by statistical tables giving the total area of the land tenure categories for each State and Territory. This map is also available as free vector GIS data, ArcInfo Export, ArcView Shapefile and MapInfo mid/mif. Please direct any corrections or feedback on this map to mapfeedback@ga.gov.au. Product Specifications: Coverage: Australia Currency: Mid 1993 Coordinates: Geographical Datum: AGD66 Projection: Simple Conic on two standard parallels 18S and 36S Medium: Printed map (flat and folded). ANZLIC unique identifier: ANZCW0703005424. Metadata Statement.

Geoscience Australia has the primary role in the delineation of Australia's domestic and international maritime limits and boundaries. An output of this activity is the development of the Australian Maritime Boundaries (AMB) data. AMB is a GIS data product, replacing Australian Maritime Boundaries 2014a (AMB2014a), providing access to the data for Australia's maritime zones. AMB is a digital representation of Australia's limits and boundaries as established under the Seas and Submerged Lands Act 1973 and associated proclamations. The data also include a representation of the limits by which the scheduled and offshore areas of each of the States and of the Northern Territory are determined under the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGSA). In the event of an inconsistency between AMB data and the limits under any legislation, the latter prevails. The data have been published by Geoscience Australia in consultation with other relevant Commonwealth Government agencies including the Attorney-General's Department, the Department of Foreign Affairs and Trade and the Australian Hydrographic Office. This version has been updated to reflect the 2018 Timor Sea Treaty. AMB data comprise the territorial straight baselines and the outer limits of each zone, together with maritime boundaries determined by treaties between Australia and neighbouring countries. All data coordinates are supplied in the GDA94 datum. The data reflects the location of the coastline within the constraints of available source material at the time of production. AMB Data can also be viewed on-line via AMSIS (http://www.ga.gov.au/marine/jurisdiction/amsis.html). Product Specifications Coverage: Australia including all external territories Currency: August 2019. Coordinates: Geographical Datum: GDA94 (functionally equivalent to WGS84). Format: ESRI Geodatabase and REST web service - free online. The area of coverage of the AMB data is for the whole of the Australian marine jurisdiction which includes waters adjacent to the mainland, offshore islands and External Territories. The geographical extent is approximately between the latitude limits of 7 S to 70 S and the longitude limits 40 E to 175 E. This dataset includes the following disclaimer: AMB data is a digital representation of the territorial sea baseline and of the outer limits of Australia's maritime zones. The baseline and zones are established under the Seas and Submerged Lands Act 1973. The data also includes a representation of the limits by which the waters adjacent to each of the Australian States and of the Northern Territory are determined under the Coastal Waters (State Powers) Act 1980, Coastal Waters (Northern Territory Powers) Act 1980 and the Offshore Petroleum and Greenhouse Gas Storage Act 2006. In the event of an inconsistency between AMB data and the baselines and limits under the legislation, the latter prevails.

Geoscience Australia has the primary role in the delineation of Australia's domestic and international maritime limits and boundaries. An output of this activity is the development of the Australian Maritime Boundaries (AMB) data. AMB is a GIS data product, replacing Australian Maritime Boundaries 2014a (AMB2014a), providing access to the data for Australia's maritime zones. AMB is a digital representation of Australia's limits and boundaries as established under the Seas and Submerged Lands Act 1973 and associated proclamations. The data also include a representation of the limits by which the scheduled and offshore areas of each of the States and of the Northern Territory are determined under the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGSA). In the event of an inconsistency between AMB data and the limits under any legislation, the latter prevails. The data have been published by Geoscience Australia in consultation with other relevant Commonwealth Government agencies including the Attorney-General's Department, the Department of Foreign Affairs and Trade and the Australian Hydrographic Office. This version has been updated to reflect the 2018 Timor Sea Treaty. AMB data comprise the territorial straight baselines and the outer limits of each zone, together with maritime boundaries determined by treaties between Australia and neighbouring countries. All data coordinates are supplied in the GDA94 datum. The data reflects the location of the coastline within the constraints of available source material at the time of production. AMB Data can also be viewed on-line via AMSIS (http://www.ga.gov.au/marine/jurisdiction/amsis.html). Product Specifications Coverage: Australia including all external territories Currency: August 2019. Coordinates: Geographical Datum: GDA94 (functionally equivalent to WGS84). Format: ESRI Geodatabase and REST web service - free online. The area of coverage of the AMB data is for the whole of the Australian marine jurisdiction which includes waters adjacent to the mainland, offshore islands and External Territories. The geographical extent is approximately between the latitude limits of 7 S to 70 S and the longitude limits 40 E to 175 E. This dataset includes the following disclaimer: AMB data is a digital representation of the territorial sea baseline and of the outer limits of Australia's maritime zones. The baseline and zones are established under the Seas and Submerged Lands Act 1973. The data also includes a representation of the limits by which the waters adjacent to each of the Australian States and of the Northern Territory are determined under the Coastal Waters (State Powers) Act 1980, Coastal Waters (Northern Territory Powers) Act 1980 and the Offshore Petroleum and Greenhouse Gas Storage Act 2006. In the event of an inconsistency between AMB data and the baselines and limits under the legislation, the latter prevails.

Geoscience Australia has the primary role in the delineation of Australia's domestic and international maritime limits and boundaries. An output of this activity is the development of the Australian Maritime Boundaries (AMB) data. AMB is a GIS data product, replacing Australian Maritime Boundaries 2014a (AMB2014a), providing access to the data for Australia's maritime zones. AMB is a digital representation of Australia's limits and boundaries as established under the Seas and Submerged Lands Act 1973 and associated proclamations. The data also include a representation of the limits by which the scheduled and offshore areas of each of the States and of the Northern Territory are determined under the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGSA). In the event of an inconsistency between AMB data and the limits under any legislation, the latter prevails. The data have been published by Geoscience Australia in consultation with other relevant Commonwealth Government agencies including the Attorney-General's Department, the Department of Foreign Affairs and Trade and the Australian Hydrographic Office. This version has been updated to reflect the 2018 Timor Sea Treaty. AMB data comprise the territorial straight baselines and the outer limits of each zone, together with maritime boundaries determined by treaties between Australia and neighbouring countries. All data coordinates are supplied in the GDA94 datum. The data reflects the location of the coastline within the constraints of available source material at the time of production. AMB Data can also be viewed on-line via AMSIS (http://www.ga.gov.au/marine/jurisdiction/amsis.html). Product Specifications Coverage: Australia including all external territories Currency: August 2019. Coordinates: Geographical Datum: GDA94 (functionally equivalent to WGS84). Format: ESRI Geodatabase and REST web service - free online. The area of coverage of the AMB data is for the whole of the Australian marine jurisdiction which includes waters adjacent to the mainland, offshore islands and External Territories. The geographical extent is approximately between the latitude limits of 7 S to 70 S and the longitude limits 40 E to 175 E. This dataset includes the following disclaimer: AMB data is a digital representation of the territorial sea baseline and of the outer limits of Australia's maritime zones. The baseline and zones are established under the Seas and Submerged Lands Act 1973. The data also includes a representation of the limits by which the waters adjacent to each of the Australian States and of the Northern Territory are determined under the Coastal Waters (State Powers) Act 1980, Coastal Waters (Northern Territory Powers) Act 1980 and the Offshore Petroleum and Greenhouse Gas Storage Act 2006. In the event of an inconsistency between AMB data and the baselines and limits under the legislation, the latter prevails.

This layer supersedes State Border (LGATE-194) The State Border of Western Australia, which separates WA from South Australia and the Northern Territory, and situated approximately on the 129 degrees East, Meridian of Longitude. Derived from the Spatial Cadastral Database (SCDB) and based on GDA 2020. For more information, please contact your Landgate Customer Experience Consultant or email customerexperience@landgate.wa.gov.au. © Western Australian Land Information Authority (Landgate). Use of Landgate data is subject to Personal Use License terms and conditions unless otherwise authorised under approved License terms and conditions.