This dataset consists of underway data, including bathymetric data, collected aboard Australian Antarctic Division research vessels between 1985 and 2012. The data are available in csv format and the raw SIMRAD format. In the csv files bathymetric data is in the WTR_DEPTH_M column. Some voyages will not have bathymetric data associated with them. The csv data may have been quality checked. Most of the underway data was quality checked ('dot zapped') up to and including voyage 4 2003/04. Data quality reports are available by searching at http://data.aad.gov.au/aadc/voyages/ Other than on Marine Science voyages, the Aurora Australis bathymetric data gathering procedures prior to about 2000 were not checked during the voyage. The echo sounder was turned on in Hobart and if it stopped working during the voyage, then there was no one to get it going again. Bathymetric data from these voyages that has been processed by the Royal Australian Navy is available via other metadata records linked to the parent record with ID AAD_voyage_soundings.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS.

Metadata record for data from ASAC Project 1119 See the link below for public details on this project. A marked bend in the Hawaiian-Emperor seamount chain supposedly resulted from a recent major reorganization of the plate-mantle system there 50 million years ago. Although alternative mantle-driven and plate-shifting hypotheses have been proposed, no contemporaneous circum-Pacific plate events have been identified. We report reconstructions for Australia and Antarctica that reveal a major plate reorganization between 50 and 53 million years ago. Revised Pacific Ocean sea-floor reconstructions suggest that subduction of the Pacific-Izanagi spreading ridge and subsequent Marianas/Tonga-Kermadec subduction initiation may have been the ultimate causes of these events. Thus, these plate reconstructions solve long-standing continental fit problems and improve constraints on the motion between East and West Antarctica and global plate circuit closure.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS. Seafloor features were classified largely based on the International Hydrographic Organisation (2001) classification of undersea features, and expanded to include additional features, including those likely to have specific substrate types and influence on oceanography. This approach improves the technique as a predictor of physical conditions that may influence seafloor communities. The geomorphic map has been used for developing a benthic bioregionalisation and for developing a representative system of Marine Protected Areas for East Antarctica. Slight modifications have been made since original publication in O'Brien et al. 2009 and Post et al. 2014. These include: - updating of some feature names; - combining "wave affected banks" with "shelf banks" - Combining "coastal terrance" with "island coastal terrane" as "Coastal/Shelf Terrane" - replacing canyon vectors with polygons by using a buffer around the vectors Further details of the original mapping can be found in: O'Brien, P.E., Post, A.L., Romeyn, R., 2009. Antarctic-wide geomorphology as an aid to habitat mapping and locating Vulnerable Marine Ecosystems, Commission for the Conservation of Antarctic Marine Living Resources Vulnerable Marine Ecosystems Workshop, Paper WS-VME-09/10. CCAMLR, La Jolla, California, USA. Post, A.L., Meijers, A.J.S., Fraser, A.D., Meiners, K.M., Ayers, J., Bindoff, N.L., Griffiths, H.J., Van de Putte, A.P., O'Brien, P.E., Swadling, K.M., Raymond, B., 2014. Chapter 14. Environmental Setting, In: De Broyer, C., Koubbi, P., Griffiths, H.J., Raymond, B., d'Udekem d'Acoz, C., et al. (Eds.), Biogeographic Atlas of the Southern Ocean. Scientific Committee on Antarctic Research, Cambridge, pp. 46-64.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS. Seafloor features were classified largely based on the International Hydrographic Organisation (2001) classification of undersea features, and expanded to include additional features, including those likely to have specific substrate types and influence on oceanography. This approach improves the technique as a predictor of physical conditions that may influence seafloor communities. The geomorphic map has been used for developing a benthic bioregionalisation and for developing a representative system of Marine Protected Areas for East Antarctica. Slight modifications have been made since original publication in O'Brien et al. 2009 and Post et al. 2014. These include: - updating of some feature names; - combining "wave affected banks" with "shelf banks" - Combining "coastal terrance" with "island coastal terrane" as "Coastal/Shelf Terrane" - replacing canyon vectors with polygons by using a buffer around the vectors Further details of the original mapping can be found in: O'Brien, P.E., Post, A.L., Romeyn, R., 2009. Antarctic-wide geomorphology as an aid to habitat mapping and locating Vulnerable Marine Ecosystems, Commission for the Conservation of Antarctic Marine Living Resources Vulnerable Marine Ecosystems Workshop, Paper WS-VME-09/10. CCAMLR, La Jolla, California, USA. Post, A.L., Meijers, A.J.S., Fraser, A.D., Meiners, K.M., Ayers, J., Bindoff, N.L., Griffiths, H.J., Van de Putte, A.P., O'Brien, P.E., Swadling, K.M., Raymond, B., 2014. Chapter 14. Environmental Setting, In: De Broyer, C., Koubbi, P., Griffiths, H.J., Raymond, B., d'Udekem d'Acoz, C., et al. (Eds.), Biogeographic Atlas of the Southern Ocean. Scientific Committee on Antarctic Research, Cambridge, pp. 46-64.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS. Seafloor features were classified largely based on the International Hydrographic Organisation (2001) classification of undersea features, and expanded to include additional features, including those likely to have specific substrate types and influence on oceanography. This approach improves the technique as a predictor of physical conditions that may influence seafloor communities. The geomorphic map has been used for developing a benthic bioregionalisation and for developing a representative system of Marine Protected Areas for East Antarctica. Slight modifications have been made since original publication in O'Brien et al. 2009 and Post et al. 2014. These include: - updating of some feature names; - combining "wave affected banks" with "shelf banks" - Combining "coastal terrance" with "island coastal terrane" as "Coastal/Shelf Terrane" - replacing canyon vectors with polygons by using a buffer around the vectors Further details of the original mapping can be found in: O'Brien, P.E., Post, A.L., Romeyn, R., 2009. Antarctic-wide geomorphology as an aid to habitat mapping and locating Vulnerable Marine Ecosystems, Commission for the Conservation of Antarctic Marine Living Resources Vulnerable Marine Ecosystems Workshop, Paper WS-VME-09/10. CCAMLR, La Jolla, California, USA. Post, A.L., Meijers, A.J.S., Fraser, A.D., Meiners, K.M., Ayers, J., Bindoff, N.L., Griffiths, H.J., Van de Putte, A.P., O'Brien, P.E., Swadling, K.M., Raymond, B., 2014. Chapter 14. Environmental Setting, In: De Broyer, C., Koubbi, P., Griffiths, H.J., Raymond, B., d'Udekem d'Acoz, C., et al. (Eds.), Biogeographic Atlas of the Southern Ocean. Scientific Committee on Antarctic Research, Cambridge, pp. 46-64.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS. Seafloor features were classified largely based on the International Hydrographic Organisation (2001) classification of undersea features, and expanded to include additional features, including those likely to have specific substrate types and influence on oceanography. This approach improves the technique as a predictor of physical conditions that may influence seafloor communities. The geomorphic map has been used for developing a benthic bioregionalisation and for developing a representative system of Marine Protected Areas for East Antarctica. Slight modifications have been made since original publication in O'Brien et al. 2009 and Post et al. 2014. These include: - updating of some feature names; - combining "wave affected banks" with "shelf banks" - Combining "coastal terrance" with "island coastal terrane" as "Coastal/Shelf Terrane" - replacing canyon vectors with polygons by using a buffer around the vectors Further details of the original mapping can be found in: O'Brien, P.E., Post, A.L., Romeyn, R., 2009. Antarctic-wide geomorphology as an aid to habitat mapping and locating Vulnerable Marine Ecosystems, Commission for the Conservation of Antarctic Marine Living Resources Vulnerable Marine Ecosystems Workshop, Paper WS-VME-09/10. CCAMLR, La Jolla, California, USA. Post, A.L., Meijers, A.J.S., Fraser, A.D., Meiners, K.M., Ayers, J., Bindoff, N.L., Griffiths, H.J., Van de Putte, A.P., O'Brien, P.E., Swadling, K.M., Raymond, B., 2014. Chapter 14. Environmental Setting, In: De Broyer, C., Koubbi, P., Griffiths, H.J., Raymond, B., d'Udekem d'Acoz, C., et al. (Eds.), Biogeographic Atlas of the Southern Ocean. Scientific Committee on Antarctic Research, Cambridge, pp. 46-64.

Publicly available bathymetry and geophysical data has been used to map geomorphic features of the Antarctic continental margin and adjoining ocean basins at scales of 1:1-2 million. The key bathymetry datasets used were GEBCO08 and ETOPO2 satellite bathymetry (Smith & Sandwell 1997), in addition to seismic lines in key areas. Twenty-seven geomorphic units were identified based on interpretation of the seafloor bathymetry with polygons digitised by hand in ArcGIS. Seafloor features were classified largely based on the International Hydrographic Organisation (2001) classification of undersea features, and expanded to include additional features, including those likely to have specific substrate types and influence on oceanography. This approach improves the technique as a predictor of physical conditions that may influence seafloor communities. The geomorphic map has been used for developing a benthic bioregionalisation and for developing a representative system of Marine Protected Areas for East Antarctica. Slight modifications have been made since original publication in O'Brien et al. 2009 and Post et al. 2014. These include: - updating of some feature names; - combining "wave affected banks" with "shelf banks" - Combining "coastal terrance" with "island coastal terrane" as "Coastal/Shelf Terrane" - replacing canyon vectors with polygons by using a buffer around the vectors Further details of the original mapping can be found in: O'Brien, P.E., Post, A.L., Romeyn, R., 2009. Antarctic-wide geomorphology as an aid to habitat mapping and locating Vulnerable Marine Ecosystems, Commission for the Conservation of Antarctic Marine Living Resources Vulnerable Marine Ecosystems Workshop, Paper WS-VME-09/10. CCAMLR, La Jolla, California, USA. Post, A.L., Meijers, A.J.S., Fraser, A.D., Meiners, K.M., Ayers, J., Bindoff, N.L., Griffiths, H.J., Van de Putte, A.P., O'Brien, P.E., Swadling, K.M., Raymond, B., 2014. Chapter 14. Environmental Setting, In: De Broyer, C., Koubbi, P., Griffiths, H.J., Raymond, B., d'Udekem d'Acoz, C., et al. (Eds.), Biogeographic Atlas of the Southern Ocean. Scientific Committee on Antarctic Research, Cambridge, pp. 46-64.