Digital representation of the revised Brighton Reconnaissance Soil Map, originally surveyed by CSIRO in 1957. Original mapping scale was 1 inch to 1 mile (1:63360). The soil map covers the northern half of the Derwent 1:100 000 topographic mapsheet area. The revised map was digitally reproduced by DPIWE at a more reliable scale of 1:100 000. The soil map represents one in a series of Reconnaissance soil survey maps compiled by CSIRO for Tasmania. The data is comprised of lines and polygons. Soil data attributes include soil mapping unit, unit code, unit description, and the Australian Soil Classification, Great Soil Group classification and soil profile class for the dominant soil. Additional soil information is displayed as annotation on both the Arcview version of the digital map and on the paper map. Attribute data for the soil profile description sample site locations displayed on the digital and non-digital map are stored in the DPIWE Oracle database. These sites were collected by CSIRO and DPIWE for a range of projects. They are listed as a separate metadata entry. A written report describing the soil map data is available as 'Revised Brighton Reconnaissance Soil Map of Tasmania. Department of Primary Industries, Water and Environment'.

Digital representation of the revised Buckland Reconnaissance Soil Map, originally surveyed by CSIRO in 1958. Original mapping scale was 1 inch to 1 mile (1:63360). The soil map covers the northern half of the Prosser 1:100 000 topographic mapsheet area. The revised map was digitally reproduced by DPIWE at a more reliable scale of 1:100 000. The data represents one in a series of Reconnaissance soil survey maps compiled by CSIRO for Tasmania. The data is comprised of lines and polygons. Soil data attributes include soil mapping unit, unit code, unit description, and the Australian Soil Classification, Great Soil Group classification and soil profile class for the dominant soil. Additional soil information is displayed as annotation on both the Arcview version of the digital map and on the paper map. Attribute data for the soil profile description sample site locations displayed on the digital and non-digital map are stored in the DPIWE Oracle database. These sites were collected by CSIRO and DPIWE for a range of projects. They are listed as a separate metadata entry. A written report describing the soil map data is available as 'Revised Buckland Reconnaissance Soil Map of Tasmania. Department of Primary Industries, Water and Environment'.

A collection of high-resolution soil attribute grid surfaces for land areas in Tasmania. There are 17 soil attribute products available that delineate specific soil properties at standardized soil depths (0-5cm, 0-15cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm) and grid resolutions (30m and 80m grid resolutions). Soil attributes available include Available Water Capacity (AWC, %), Bulk Density (BD, Mg/m3), Soil Texture (Clay; Sand; Silt, %), Coarse Fragments (CF, %), Soil Depth (cm), Soil Drainage, Electrical Conductivity (EC/ECse, dS/m), Field Capacity (FC), Soil Organic Carbon (SOC, %), Soil Permeability, pH, Exchangeable Calcium (ExCa, ppm), Exchangeable Magnesium (ExMg, ppm) and Depth to Sodic layer (Sodic Depth, cm). A document that describes each dataset and associated nomenclature can be accessed here: https://nrmdatalibrary.dpipwe.tas.gov.au/FactSheets/WfW/ListMapUserNotes/Inventory_DSM_Tas.pdf Note that these products were developed using datasets held by the Tasmanian Department of Primary Industries Parks Water & Environment (DPIPWE) Soils Database, hosted on the Tasmanian Natural Values Atlas (https://www.naturalvaluesatlas.tas.gov.au/). The mapping was made by using spatial modelling and digital soil mapping (DSM) techniques with the outputs available via a Web Map Service (WMS): https://spatial.dpipwe.tas.gov.au/naturalassets/Soil/wms Or viewed in the following Web Map application: https://arcg.is/4PaT8

This layer provides the extents of Reconnaissance Soil mapping for Tasmania

These are the soil attribute products of the Tasmanian Soil Attribute Grids. There are 8 soil attribute products available from the TERN Soil Facility. Each soil attribute product is a collection of 6 depth slices. Each depth raster has an upper and lower uncertainty limit raster associated with it. The depths provided are 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm, consistent with the Specifications of the GlobalSoilMap. Attributes: pH - Water (pHw); Electical Conductivity dS/m (ECD); Clay % (CLY); Sand % (SND); Silt % (SLT); Bulk Density - Whole Earth Mg/m3 (BDw); Organic Carbon % (SOC); Coarse Fragments >2mm (CFG). These products were developed using datasets held by the Tasmanian Department of Primary Industries Parks Water & Environment (DPIPWE) Soils Database. The mapping was made by using spatial modelling and digital soil mapping (DSM) techniques to produce a fine resolution 3 arc-second grid of soil attribute values and their uncertainties, across all of Tasmania. Note: Previous versions of this collection contained a Depth layer. This has been removed as the units do not comply with Global Soil Map specifications.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.