This resource contains a predicted seabed gravel content grid for the greater Darwin Harbour region as part of a baseline seabed mapping program of Darwin Harbour and Bynoe Harbour. This project was funded through offset funds provided by an INPEX-led Ichthys LNG Project to the Northern Territory Government's Department of Environment and Natural Resources (NTG-DENR) with co-investment from Geoscience Australia (GA) and the Australian Institute of Marine Science (AIMS). The intent of this program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps and information to underpin marine resource management decisions. The predicted seabed gravel content grid was derived from a compilation of multiple surveys undertaken by GA, AIMS and NTG-DENR between 2011 and 2017, including GA0333 (Siwabessy et al., 2015), GA0341 (Siwabessy et al., 2015), GA0351/SOL6187 (Siwabessy et al., 2016), GA4452/SOL6432 (Siwabessy et al., 2017), GA0356 (Radke et al., 2017), and GA0358 and GA0359 (Radke et al., 2018), adding to those from a previous survey GA0333 collected by GA, AIMS and NTG-DENR. This dataset provides spatially continuous predictions of seabed %gravel (>2000 µm) content for the Darwin and Bynoe harbour region, northern Australian marine margin. Data are presented in 10 m resolution raster grids format and ascii text file. Predictions are based on 395 samples and 14 environmental variables derived from high resolution multibeam sonar bathymetry and backscatter data. Accuracy of predictions is high, with a VEcv = 59% for gravel; and the predictive accuracy has been increased by 68.4% for gravel in comparison with the commonly used method (i.e., IDW). Absences in predictions occur in this dataset as a result of non-availability associated with predictive variables. This dataset supersedes previous predictions of mud content for the Darwin and Bynoe harbour region with demonstrated improvements in predictive accuracy.

This resource contains a predicted seabed sand content grid for the greater Darwin Harbour region as part of a baseline seabed mapping program of Darwin Harbour and Bynoe Harbour. This project was funded through offset funds provided by an INPEX-led Ichthys LNG Project to the Northern Territory Government's Department of Environment and Natural Resources (NTG-DENR) with co-investment from Geoscience Australia (GA) and the Australian Institute of Marine Science (AIMS). The intent of this program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps and information to underpin marine resource management decisions. The predicted seabed sand content grid was derived from a compilation of multiple surveys undertaken by GA, AIMS and NTG-DENR between 2011 and 2017, including GA0333 (Siwabessy et al., 2015), GA0341 (Siwabessy et al., 2015), GA0351/SOL6187 (Siwabessy et al., 2016), GA4452/SOL6432 (Siwabessy et al., 2017), GA0356 (Radke et al., 2017), and GA0358 and GA0359 (Radke et al., 2018), adding to those from a previous survey GA0333 collected by GA, AIMS and NTG-DENR. This dataset provides spatially continuous predictions of seabed %sand (63-2000 µm) content for the Darwin and Bynoe harbour region, northern Australian marine margin. Data are presented in 10 m resolution raster grids format and ascii text file. Predictions are based on 395 samples and seven environmental variables derived from high resolution multibeam sonar bathymetry and backscatter data. Accuracy of predictions is high, with a VEcv = 39% for sand; and the predictive accuracy has been increased by 84.8% for sand in comparison with the commonly used method (i.e., IDW). Absences in predictions occur in this dataset as a result of non-availability associated with predictive variables. This dataset supersedes previous predictions of sand content for the Darwin and Bynoe harbour region with demonstrated improvements in predictive accuracy.

This resource contains a predicted seabed mud content grid for the greater Darwin Harbour region as part of a baseline seabed mapping program of Darwin Harbour and Bynoe Harbour. This project was funded through offset funds provided by an INPEX-led Ichthys LNG Project to the Northern Territory Government's Department of Environment and Natural Resources (NTG-DENR) with co-investment from Geoscience Australia (GA) and the Australian Institute of Marine Science (AIMS). The intent of this program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps and information to underpin marine resource management decisions. The predicted seabed mud content grid was derived from a compilation of multiple surveys undertaken by GA, AIMS and NTG-DENR between 2011 and 2017, including GA0333 (Siwabessy et al., 2015), GA0341 (Siwabessy et al., 2015), GA0351/SOL6187 (Siwabessy et al., 2016), GA4452/SOL6432 (Siwabessy et al., 2017), GA0356 (Radke et al., 2017), and GA0358 and GA0359 (Radke et al., 2018), adding to those from a previous survey GA0333 collected by GA, AIMS and NTG-DENR. This dataset provides spatially continuous predictions of seabed %mud (< 63 µm) content for the Darwin and Bynoe harbour region, northern Australian marine margin. Data are presented in 10 m resolution raster grids format and ascii text file. Predictions are based on 395 samples and nine environmental variables derived from high resolution multibeam sonar bathymetry and backscatter data. Accuracy of predictions is very high, with a VEcv = 62% for mud; and the predictive accuracy has been increased by 198.3% for mud in comparison with the commonly used method (i.e., IDW). Absences in predictions occur in this dataset as a result of non-availability associated with predictive variables. This dataset supersedes previous predictions of mud content for the Darwin and Bynoe harbour region with demonstrated improvements in predictive accuracy.

Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Department of Environment and Natural Resources within the Northern Territory Government (DENR) undertook collaborative seabed mapping surveys (GA0351/SOL6187, GA4452/SOL6432 and combined GA0361 & GA0362) in the Darwin-Bynoe Harbour region between 2015 and 2018. This seabed mapping project forms a core component of a four-year collaborative research program between DENR, GA and AIMS, which was funded by the INPEX-operated Ichthys LNG Project to DENR, with co-investment by GA and AIMS. The purpose of the program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions through the collation and acquisition of baseline data that enable the creation of habitat maps to better inform marine resource management decisions. Mapping and sampling in the survey area utilised multibeam echosounders, sub-bottom profilers, underwater cameras and grab samplers. In total, this data package extends over an area of 1978 km2, including 1754 km2 mapped using multibeam echosounders, during four marine surveys over 247 days. The baseline environmental data acquired in this program provides new insights into the marine environments of the Greater Darwin and Bynoe Harbour region, will inform future environmental assessments in the region and help build our knowledge of seabed features and processes in tropical northern Australia.

Benthic sediment sampling of Inner Darwin Harbour (GA0358) and shallow water areas in and around Bynoe Harbour (GA0359) was undertaken between May 29 and June 19, 2017. Partners involved in the surveys included Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Department of Environment and Natural Resources within the Northern Territory Government (NT DENR) (formerly the Department of Land and Resource Management (DLRM)). These surveys form part of a four year (2014-2018) science program aimed at improving knowledge about the marine environments in the regions around Darwin and Bynoe Harbour’s through the collection and collation of baseline data that will enable the creation of thematic habitat maps to underpin marine resource management decisions. This project is being led by the Northern Territory Government and is supported by the INPEX-led Ichthys LNG Project, in collaboration with - and co-investment from GA and AIMS. This dataset comprises grain size measurements on seabed sediments.

This dataset contains point data describing physical properties of marine sediments as held within the Geoscience Australia Marine Sediment database (MARS) for samples acquired by marine surveys that occurred between 1905 and 2017. Samples were collected from within the Australian Exclusive Economic Zone, plus waters within Australian Antarctic Territory, waters around Christmas Island (Indian Ocean) and outside the EEZ within the Timor Sea and waters around Papua New Guinea. Samples are sourced from a range of organisations, with sampling technique, spatial accuracy and sample preservation varying between surveys. Attributes include survey ID and name, sample ID, sampling method, water depth and location information. Sediment properties include %mud, %sand, %gravel, mean grain size and texture (classified using the Folk (1954) nomenclature for sediments). There is no consistent datum and projection due to the time span, differing collecting organisations and method of measurement across the dataset. All data is referenced to WGS 84 unless stated otherwise.

This data presents the results of seabed mapping and habitat classification surveys completed in Darwin Harbour during 2011 and 2013 as part of the Northern Territory Government's marine habitat mapping program. This research is a collaboration between Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS), the Department of Land Resource Management (DLRM) and the Darwin Port Corporation. Key objectives are to: - Produce detailed maps of the bathymetry and derived parameters such as slope and rugosity, - Classify the seabed into areas of hard and soft substrate, and, - Produce seabed habitat maps (or seascapes). Key outcomes from the surveys include: 1. Improved understanding of the seabed of Darwin Harbour. The main seabed geomorphic features identified in Darwin Harbour include banks, ridges, plains and scarps, and a deep central channel that divides into smaller and shallower channels. Acoustically hard substrates are found mostly on banks and are associated with rocky reef and sponge gardens, and are often overlain by a thin veneer of sandy sediment. In contrast, plains and channels are characterised by acoustically soft substrates and are associated with fine sediments (mud and sand). 2. Classification of physical seabed properties to produce a Seascape Map for Darwin Harbour. Six seascape classes (potential habitats) were derived using an Iterative Self Organising (ISO) unsupervised classification scheme. These six classes are related to statistically unique combinations of seabed substrate, relief, bedform and presence of sediment veneer (quite often inferred from presence of epibenthic biota).

This dataset contains surface sediment grain size distributions derived from automated image processing of in situ seafloor images obtained with an underwater camera system at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The surface sediment grain size distribution data are provided in comma-separated text (.csv) format for each site and for data used in calibration and validation of the automated image processing technique.

This dataset contains surface sediment grain size distributions derived from automated image processing of in situ seafloor images obtained with an underwater camera system at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The surface sediment grain size distribution data are provided in comma-separated text (.csv) format for each site and for data used in calibration and validation of the automated image processing technique.

These data provide grain-size measurements from sediment samples collected as part of the USGS DUring Nearshore Event eXperiment (DUNEX) site on Pea Island National Wildlife Refuge, NC. DUNEX is a multi-agency, academic, and non-governmental organization collaborative community experiment designed to study nearshore coastal processes during storm events. USGS participation in DUNEX will contribute new measurements and models that will increase our understanding of storm impacts to coastal environments, including hazards to humans and infrastructure and changes in landscape and natural habitats. The grain-size analysis data are part of USGS field activities 2021-028-FA and 2021-032-FA and are related to field activity 2021-029-FA.