Frame based vertical aerial photography acquired from 1945 to 2012 over Tasmania to support the TASMAP mapping program by Land Tasmania,(DPIPWE).

This layer provides the extents of Reconnaissance Soil mapping for Tasmania

Digital imagery has been acquired for Tasmanian from 2010 to present day. The Digital Aerial Imagery Season Orthomosaics are compilations of aerial imagery captured for each flying season, during the summer season from October through to the following March. The mosaics are compiled from high resolution imagery, usually captured at 10cm and 25cm resolution.

A collection of high-resolution soil attribute grid surfaces for land areas in Tasmania. There are 17 soil attribute products available that delineate specific soil properties at standardized soil depths (0-5cm, 0-15cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm) and grid resolutions (30m and 80m grid resolutions). Soil attributes available include Available Water Capacity (AWC, %), Bulk Density (BD, Mg/m3), Soil Texture (Clay; Sand; Silt, %), Coarse Fragments (CF, %), Soil Depth (cm), Soil Drainage, Electrical Conductivity (EC/ECse, dS/m), Field Capacity (FC), Soil Organic Carbon (SOC, %), Soil Permeability, pH, Exchangeable Calcium (ExCa, ppm), Exchangeable Magnesium (ExMg, ppm) and Depth to Sodic layer (Sodic Depth, cm). A document that describes each dataset and associated nomenclature can be accessed here: https://nrmdatalibrary.dpipwe.tas.gov.au/FactSheets/WfW/ListMapUserNotes/Inventory_DSM_Tas.pdf Note that these products were developed using datasets held by the Tasmanian Department of Primary Industries Parks Water & Environment (DPIPWE) Soils Database, hosted on the Tasmanian Natural Values Atlas (https://www.naturalvaluesatlas.tas.gov.au/). The mapping was made by using spatial modelling and digital soil mapping (DSM) techniques with the outputs available via a Web Map Service (WMS): https://spatial.dpipwe.tas.gov.au/naturalassets/Soil/wms Or viewed in the following Web Map application: https://arcg.is/4PaT8

Mosaic image of the Simplified Geology map theme in the Tasmanian Landslide Map Series published by Mineral Resources Tasmania. Shows simplified geology over the Tamar Valley region â surficial and bedrock units.

This dataset contains an aerial image mosaic of the City of Melbourne municipal area. This image provies a 'top down' view of the city and is availible for download in a georeferenced format. Capture Information - Capture Date: 2nd/3rd February 2019 - Capture Pixel Size: 5cm - Map Projection: MGA Zone 55 (MGA55) Additional technical information: ArborCarbon collected the aerial image using the ArborCam, a unique 11-band airborne multispectral camera system optimized for the accurate detection of vegetation and subtle changes in vegetation condition. ArborCarbon have created this seamless 5cm pixel resolution RGB mosaic co-registered to the 4-band image. The multispectral imagery was acquired at 8,000ft above ground level over the City of Melbourne under cloudless conditions between 09:45 and 12:45 on 2nd and 3rd February 2019. Imagery was acquired with the ArborCam system with a ground sample distance (GSD) ranging from 6 cm/pixel to 25 cm/pixel dependent on the band. Preview Image: See an example image showing the data quality of the aerial. Download: Download the aerial image as a ecw file (6GB)

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

1:25 000 Mapgrid of Australia Boundaries - Double Format.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.