The Natural Resource Management (NRM) Regions dataset is maintained for the purpose of authoritative reporting on the Australian Government's NRM investments. The dataset is designed to cover all Australian territory where Australian Government funded NRM projects might take place and includes major islands, external territories, and state and coastal waters in addition to the NRM regional boundaries.Whilst the boundaries of NRM Regions are defined by legislation in some states and territories, this dataset should not be used to represent legal boundaries in any way. It is an administrative dataset developed for the purpose of reporting and public information. It should be noted that from time to time the states and/or territories may revise their regional boundaries in accordance with local needs and therefore alterations to either the attribution or boundaries of the data may occur in the future.Current VersionIn total, the 2020 version dataset comprises 63 map objects for 61 NRM regions. These comprise 56 mainland regions (of which two have associated large islands as distinct map objects) and a further five external territory islands.The 2020 version updates the previous version (2017) with changes to boundaries of South Australian NRM Regions to align with new regional landscape boundaries (https://data.sa.gov.au/data/dataset/landscapes-sa-boundaries) under the Landscapes South Australia Act 2019 (SA) Act which replaced the Natural Resources Management Act 2004 (SA) Act. Minor edits were made to remove gaps, slivers and overlaps so the new SA boundaries aligned with non-SA NRM Regions. The "Hills and Fleurieu" and "Green Adelaide" Landscapes SA boundaries were merged to form the single 4010 "Adelaide and Mount Lofty Ranges" NRM Region, although at the request of the data owner, the previous names and internal boundaries were retained within this NRM region. Additionally a number of gaps and overlaps in the Western Australia NRM regions were fixed.Previous VersionThe 2017 version updates the previous version (2016 version 2) with changes to boundaries of six of Western Australia’s seven NRM regions (only Peel-Harvey Region is unchanged). The new WA boundaries are as agreed during 2017 by NRMWA, a collective of all incorporated NRM groups in that state.There are a few changes of NRM names in Qld, Tas and WA from the 2016 version based on line area’s suggestion.The 2017 version also removes the NRM_BODY data (added for 2016 version 2) and the non-spatial OceanWatch map label previously included. These two changes relate to Australian Government administrative arrangements for NRM funding delivery.AttributesThe principle data fields in the 2017 version dataset are:- NRM_Region- State- Area_Description (land area, state and coastal waters, territorial sea, Torres Strait)- NRM_IDNRM_ID and NRM_Region Names grouped by state/territory are as follows:New South Wales (11 regions + 1 extra map object for Lord Howe Island)1010 Central Tablelands1020 Central West1030 Greater Sydney1040 Hunter1050 Murray1060 North Coast (excludes Lord Howe Island)1061 North Coast - Lord Howe Island1070 North West NSW1080 Northern Tablelands1090 Riverina1100 South East NSW1110 WesternVictoria (10 regions)2010 Corangamite2020 East Gippsland2030 Glenelg Hopkins2040 Goulburn Broken2050 Mallee2060 North Central2070 North East2080 Port Phillip and Western Port2090 West Gippsland2100 WimmeraQueensland (15 regions)3010 Burnett Mary3020 Cape York3030 Condamine3040 Co-operative Management Area (between Cape York and Northern Gulf)3050 Desert Channels3060 Fitzroy3070 Burdekin3080 Northern Gulf3090 Maranoa Balonne and Border Rivers3100 Mackay Whitsunday3110 South East Queensland3120 South West Queensland3130 Southern Gulf3140 Wet Tropics3150 Torres StraitSouth Australia (8 regions)4010 Adelaide and Mount Lofty Ranges4020 Alinytjara Wilurara4030 Eyre Peninsula4040 Kangaroo Island4050 Northern and Yorke4060 South Australian Arid Lands4070 South Australian Murray

The Natural Resource Management (NRM) Regions dataset is maintained for the purpose of authoritative reporting on the Australian Government's NRM investments. The dataset is designed to cover all Australian territory where Australian Government funded NRM projects might take place and includes major islands, external territories, and state and coastal waters in addition to the NRM regional boundaries.The 2016 version 2 updates the marine portion of the NRM regions to be consistent with the current (2015) Australian Maritime Boundaries Information System (AMBIS) coastal water limit boundary. It also includes a new unique ID field for sorting purposes (this is explained in detail below). Three NRM names have also been updated as a result of new information from relevant state/territory agencies and/or NRM regional bodies, as follows:1. “Avon” changed to “Wheatbelt”2. “North West” changed to “Cradle Coast”The 2016 version 2 maintains definitions established in the 2015 version, including for the Peel-Harvey NRM region and for the OceanWatch Australia Limited NRM organisation (not spatially defined). It also maintains changes made in earlier versions including: the 2014 changes in NSW from Catchment Management Authorities (CMA) to Local Land Service areas; and the 2012 update/formalisation of the 2010 dataset (which was an interim update of the NRM Regions 2009 dataset, released Feb 2009). The original base layer version of this dataset was released in 2006 as the Natural Heritage Trust II (NHT2) Region Boundaries dataset.Whilst the boundaries of NRM Regions are defined by legislation in some states and territories, this dataset should not be used to represent legal boundaries in any way. It is an administrative dataset developed for the purpose of reporting and public information. It should be noted that from time to time the states and/or territories may revise their regional boundaries in accordance with local needs and therefore alterations to either the attribution or boundaries of the data may occur in the future.In total, this dataset now represents 61 NRM regions, two of which have large and remote islands which are distinguished in the spatial data, resulting in 63 map objects. The 61 NRM regions comprise 56 mainland regions administered by 55 NRM regional bodies (the Cooperative Management Area in QLD is jointly administered by the two adjacent regional bodies: the Cape York and Northern Gulf NRM bodies) and seven islands (five administered by the Australian Government as external territories, and two administered by nearby mainland NRM regional bodies, which are shown as separate map objects).The 2016 version 2 includes a new unique ID field in the table structure to allow for sorting based on state, region name and region object (where there is more than one part). The following list of regions includes the new NRM_ID field as a reference:New South Wales1010 Central Tablelands1020 Central West1030 Greater Sydney1040 Hunter1050 Murray1060 North Coast (excluding Lord Howe Island)1061 North Coast - Lord Howe Island1070 North West NSW1080 Northern Tablelands1090 Riverina1100 South East NSW1110 WesternVictoria2010 Corangamite2020 East Gippsland2030 Glenelg Hopkins2040 Goulburn Broken2050 Mallee2060 North Central2070 North East2080 Port Phillip and Western Port2090 West Gippsland2100 WimmeraQueensland3010 Burnett Mary3020 Cape York3030 Condamine3040 Cooperative Management Area (administered jointly by Cape York and Northern Gulf)3050 Desert Channels3060 Fitzroy3070 Burdekin3080 Northern Gulf3090 Border Rivers Maranoa-Balonne3100 Mackay Whitsunday3110 South East Queensland3120 South West Queensland3130 Southern Gulf3140 Wet Tropics3150 Torres StraitSouth Australia4010 Adelaide and Mount Lofty Ranges4020 Alinytjara Wilurara4030 Eyre Peninsula4040 Kangaroo Island4050 Northern and Yorke4060 South Australian Arid Lands4070 South Australian Murray Darling Basin4080 South EastWestern Australia5010 Northern Agricultural5020

The Natural Resource Management (NRM) Regions dataset is maintained for the purpose of reporting on the Australian Government's NRM investments. The dataset is designed to cover all Australian territory where Australian Government funded NRM projects might take place and includes major islands, external territories, and state and coastal waters in addition to the NRM regional boundaries.This 2015 version defines the Peel-Harvey NRM region. A boundary for the newly established OceanWatch Australia Limited NRM organisation has not been spatially defined. It has responsibility for enhancing fish habitats and improving water quality in estuaries and coastal marine environments. OceanWatch works with the fishing industry to continue the adoption of industry best harvesting practice and identify issues of common interest for fishers across Australia.The 2015 version maintains the 2014 changes in NSW from Catchment Management Authorities (CMA) to Local Land Service areas. The 2012 version updated and formalised the 2010 dataset (which was an interim update of the NRM Regions 2009 dataset, released Feb 2009). The original base layer version of this dataset was released in 2006 as the Natural Heritage Trust II (NHT2) Region Boundaries dataset. Whilst the boundaries of NRM Regions are defined by legislation in some states and territories this dataset should not be used to represent legal boundaries in any way. It is an administrative dataset developed for the purpose of reporting and public information. It should be noted that from time to time the states and/or territories may revise their regional boundaries in accordance with local needs and therefore alterations to either the attribution or boundaries of the data may occur in the future.Since 2006, NRM regions have been important in the delivery of Australian Government funding initiatives including Caring for our Country, the Natural Heritage Trust, the National Landcare Program, the Environmental Stewardship Program and the Working on Country Indigenous land and sea ranger program.In total, this dataset represents 61 regions as set out below. They comprise 56 mainland regions administered by 55 NRM regional bodies (the Cooperative Management Area in QLD is jointly administered by the two adjacent regional bodies: the Cape York and Northern Gulf NRM bodies) and seven islands (five administered by the Australian Government as external territories, and two administered by nearby mainland NRM regional bodies).Queensland1. Border Rivers Maranoa-Balonne2. Burdekin3. Burnett Mary4. Cape York5. Condamine6. Desert Channels7. Fitzroy8. Mackay Whitsunday9. Northern Gulf10. South East Queensland11. South West Queensland12. Southern Gulf13. Torres Strait14. Wet Tropics15. Cooperative Management Area (administered jointly by Cape York and Northern Gulf)NSW1. Central Tablelands2. Central West3. Greater Sydney4. Hunter5. Murray6. North Coast (Including Lord Howe Island)7. North West NSW8. Northern Tablelands9. Riverina10. South East NSW11. WesternACT1. ACTVictoria1. Corangamite2. East Gippsland3. Glenelg Hopkins4. Goulburn Broken5. Mallee6. North Central7. North East8. Port Phillip and Western Port9. West Gippsland10. WimmeraTAS1. North2. North West3. South (including Macquarie Islands)South Australia1. Adelaide and Mount Lofty Ranges2. Alinytjara Wilurara3. Eyre Peninsula4. Kangaroo Island5. Northern and Yorke6. South Australian Arid Lands7. South Australian Murray Darling Basin8. South EastWA1. Avon2. Northern Agricultural3. Perth4. Peel-Harvey5. Rangelands6. South Coast7. South WestNorthern Territory1. Northern TerritoryExternal Territories (administered by the Australian Government)1. Ashmore and Cartier Islands2. Christmas Island3. Cocos Keeling Islands4. Heard and McDonald Islands5. Norfolk IslandCredit:The NRM region boundaries (2006 base layer) are primarily based on data and information supplied by the relevant state and territory government agencies. Geoscience Australia's Australian

The Natural Resource Management (NRM) Regions dataset is maintained for the purpose of reporting on the Australian Government's NRM investments. The dataset is designed to cover all Australian territory where Australian Government funded NRM projects might take place and includes major islands, external territories, and state and coastal waters in addition to the NRM regional boundaries. This 2014 version marks the change in NSW from Catchment Management Authorities (CMA) to Local Land Service areas which will now be used for NRM regions in NSW. The 2012 version updated and formalised the 2010 dataset (which was an interim update of the NRM Regions 2009 dataset, released Feb 2009). The original base layer version of this dataset was released in 2006 as the Natural Heritage Trust II (NHT2) Region Boundaries dataset.Whilst the boundaries of NRM Regions are defined by legislation in some states and territories, this dataset should not be used to represent legal boundaries in any way. It is an administrative dataset developed for the purpose of reporting and public information. It should be noted that from time to time the states and/or territories may revise their regional boundaries in accordance with local needs and therefore alterations to either the attribution or boundaries of the data may occur in the future.Since 2006, NRM regions have been important in the delivery of Australian Government funding initiatives including Caring for our Country, the Natural Heritage Trust, the National Landcare Program, the Environmental Stewardship Program and the Working on Country Indigenous land and sea ranger program.In total, this dataset represents 60 regions as set out below. They comprise 55 mainland regions administered by 54 NRM regional bodies (one region in QLD is jointly administered by two adjacent regional bodies) and seven islands (five administered by the Australian Government as external territories, and two administered by nearby mainland NRM regional bodies).Queensland1. Border Rivers Maranoa-Balonne2. Burdekin3. Burnett Mary4. Cape York5. Condamine6. Desert Channels7. Fitzroy8. Mackay Whitsunday9. Northern Gulf10. South East Queensland11. South West Queensland12. Southern Gulf13. Torres Strait14. Wet Tropics15. Cooperative Management Area (administered jointly by Cape York and Northern Gulf)NSW1. Central Tablelands2. Central West3. Greater Sydney4. Hunter5. Murray6. North Coast (Including Lord Howe Island)7. North West NSW8. Northern Tablelands9. Riverina10. South East NSW11. WesternACT1. ACTVictoria1. Corangamite2. East Gippsland3. Glenelg Hopkins4. Goulburn Broken5. Mallee6. North Central7. North East8. Port Phillip and Western Port9. West Gippsland10. WimmeraTAS1. North2. North West3. South4. Macquarie Islands (administered by NRM South)South Australia1. Adelaide and Mount Lofty Ranges2. Alinytjara Wilurara3. Eyre Peninsula4. Kangaroo Island5. Northern and Yorke6. South Australian Arid Lands7. South Australian Murray Darling Basin8. South EastWA1. Avon2. Northern Agricultural3. Perth4. Rangelands5. South Coast6. South WestNorthern Territory1. Northern TerritoryExternal Territories (administered by the Australian Government)1. Ashmore and Cartier Islands2. Christmas Island3. Cocos Keeling Islands4. Heard and McDonald Islands5. Norfolk IslandCredit:The NRM region boundaries (2006 base layer) are primarily based on data and information supplied by the relevant state and territory government agencies. Geoscience Australia's Australian Maritime Boundaries (2006) and Geodata Coast 100K (2004) data were also used in the development of this dataset. Local Land Service region boundaries were sourced from the NSW Government.

The Natural Resource Management (NRM) Regions dataset is maintained for the purpose of authoritative reporting on the Australian Government's NRM investments. The dataset is designed to cover all Australian territory where Australian Government funded NRM projects might take place and includes major islands, external territories, and state and coastal waters in addition to the NRM regional boundaries. Whilst the boundaries of NRM Regions are defined by legislation in some states and territories, this dataset should not be used to represent legal boundaries in any way. It is an administrative dataset developed for the purpose of reporting and public information. It should be noted that from time to time the states and/or territories may revise their regional boundaries in accordance with local needs and therefore alterations to either the attribution or boundaries of the data may occur in the future.Current VersionAs part of Phase Two of the National Landcare Program (NLP) the Australian Government's natural resource management (NRM) investments will be delivered with Regional Delivery Partners (RDPs) across 56 management units. These replace the previous NLP management units used in NLP Phase One. They are officially referred to as Regional Delivery Partners for Environmental Protection, Sustainable Agriculture and Natural Resource Management Services 2022. The spatial data for RDP management units are derived from the NRM Regions spatial data, as described below.The 2022 dataset defines NRM Region boundaries and Regional Delivery Partner management units in a single dataset, thereby overcoming version control issues with the previous approach of publishing separate data layers for each.To handle a variety of required derivations, a fundamental set of 64 NRM Region map objects was first defined. This can then be compiled using various queries on non-spatial attributes. For example, as set out below, we can define 56 continental NRM Regions and 8 off-shore NRM regions, or island sub components of NRM regions located on the continent. Across these a total of 56 RDP management units can also be defined.To identify those NRM regions located on the Australian continent, a "continental" field (yes/no) has been included, for the first time, in the 2022 dataset. It allows differentiation between off-shore and continental regions, and accommodates that some NRM regions (ie one each in NSW and Tasmania) have both a continental part (eg North Coast, NSW) and an off-shore part (eg North Coast - Lord Howe Island).In accordance with the Australian Government’s Remote Indigenous Procurement Policy (RIPP) and its application to NRM regional investment, we have identified 16 RDP management units with more than 50% overlap with RIPP areas, as defined by the Australian Bureau of Statistics. A RIPP field (yes/no) is included in the attribute table.The data structure allows either NRM Regions, RDP management units and those RDPs overlapping RIPPs to be mapped from the single dataset using the NRM_REGION, RDP_NAME and RIPP fields respectively. NRM_ID, RDP_ID and RIPP fields may also be used.The 2022 version updates the previous version (2020). In total, the 2022 version dataset comprises 64 NRM map objects for 62 NRM regions. These comprise 56 mainland regions (of which two have associated islands as separate map objects), the Torres Strait NRM region, and a further five external territories. Four of these external territories are islands and one is classified as Marine NRM.Using the RDP_NAME or RDP_ID fields to map Regional Delivery Partner management units will result in 56 RDP management unitsThese comprise: 54 mainland RDP management units (two of which have island components); Torres Strait; and a "Marine NRM" management unit. The Marine NRM unit combines Australia's Territorial Sea (from 3 nautical miles to 12 nautical miles) and Australia's Exclusive Economic Zone (to 200 nautical miles) as well as Ashmore and Cartier Islands, Christmas

The Natural Resource Management (NRM) Regions dataset has been prepared for the purpose of reporting on the Australian Government's Caring for our Country investments. The dataset is designed to cover all Australian territory where Caring for our Country projects might take place and includes major islands; external territories; state and coastal waters; in addition to the 56 NRM regions. This version of the data is an update and formalisation of the 'interim 2010' dataset (which was an interim update of the NRM Regions 2009 dataset- publicly released in Feb 09).Whilst the boundaries of NRM Regions are defined by legislation in some states and territories this dataset should not be used to represent legal boundaries in any way. It is an administrative dataset developed for the purpose of reporting and public information. It should be noted that from time to time the states and/or territories may revise their regional boundaries in accordance with local needs and therefore alterations to either the attribution or boundaries of the data may occur in the future.Caring for our Country commenced on 1 July 2008. It integrates delivery of the Australian Government's previous natural resource management programs, including the Natural Heritage Trust, the National Landcare Program, the Environmental Stewardship Program and the Working on Country Indigenous land and sea ranger program.Credit:The NRM region boundaries are primarily based on data and information supplied by the relevant State and Territory government agencies. Geoscience Australia's Australian Maritime Boundaries (2006) and Geodata Coast 100K (2004) data was also used in the development of this data.

As part of Phase Two of the National Landcare Program (NLP) the Australian Government's natural resource management (NRM) investments will be delivered within NLP Management Units.The NLP Management Units dataset is maintained for the purpose of authoritative reporting on the Australian Government's NRM investments. It is designed to cover all Australian territory where Australian Government funded NRM investments might be delivered.This dataset should not be used to represent legal boundaries (notwithstanding that some boundaries are defined by legislation in some states and territories). It is an administrative dataset developed for the purpose of reporting and public information. Alterations to either the attribution or boundaries of the data may occur in the future, for example to accord with changes to NRM delivery arrangements or to reflect revisions of state/territory regional boundaries.Current VersionThe 2018 version NLP Management Units dataset contains 58 separate mapping objects. These comprise:56 mainland Management Units.A separate object for Lord Howe Island (part of North Coast, NSW Management Unit)A "Marine NRM" Management Unit which combines Australia's Territorial Sea (from 3 nautical miles to 12 nautical miles) and Australia's Exclusive Economic Zone (to 200 nautical miles). It excludes coastal waters (to 3 nautical miles) which are part of the terrestrial NLP Management Units. It also excludes Ashmore & Cartier Islands, Australian Antarctic Territory, Christmas Island, Cocos & Keeling Islands, Macquarie Island, Herd & MacDonald Islands and Norfolk Island, and those parts of Australia's Territorial Sea and Exclusive Economic Zone that surround these locations.The 2018 version was derived from the former NRM regions series (latest version was 2017), originally established in 2006 as the "Natural Heritage Trust II (NHT2) Region Boundaries" dataset. No changes to the spatial alignment of terrestrial region boundaries was made in transitioning from NRM regions to NRM Management Units.The principle data fields in the 2018 version dataset are:NLP_MU (note this replaces the former NRM_Region field)State (state, territory or 'external'for the Marine NRM unit)Area_Description (eg land area only, state and coastal waters, )NRM_ID (as described below)NRM_ID and NLP_MU names, grouped by state/territory, are as follows:New South Wales (11 Management Units + 1 extra map object for Lord Howe Island)1010 Central Tablelands1020 Central West1030 Greater Sydney1040 Hunter1050 Murray1060 North Coast (excludes Lord Howe Island)1061 North Coast - Lord Howe Island1070 North West NSW1080 Northern Tablelands1090 Riverina1100 South East NSW1110 WesternVictoria (10 Management Units)2010 Corangamite2020 East Gippsland2030 Glenelg Hopkins2040 Goulburn Broken2050 Mallee2060 North Central2070 North East2080 Port Phillip and Western Port2090 West Gippsland2100 WimmeraQueensland (15 Management Units)3010 Burnett Mary3020 Cape York3030 Condamine3040 Co-operative Management Area (between Cape York and Northern Gulf)3050 Desert Channels3060 Fitzroy3070 Burdekin3080 Northern Gulf3090 Maranoa Balonne and Border Rivers3100 Mackay Whitsunday3110 South East Queensland3120 South West Queensland3130 Southern Gulf3140 Wet Tropics3150 Torres StraitSouth Australia (8 Management Units)4010 Adelaide and Mount Lofty Ranges4020 Alinytjara Wilurara4030 Eyre Peninsula4040 Kangaroo Island4050 Northern and Yorke4060 South Australian Arid Lands4070 South Australian Murray Darling Basin4080 South EastWestern Australia (7 Management Units)5010 Northern Agricultural Region5020 Peel-Harvey Region5030 Swan Region5040 Rangelands Region5050 South Coast Region5060 South West Region5070 Avon River BasinTasmania (3 Management Units)6010 North West NRM Region6020 North NRM Region6030 South NRM RegionNorthern Territory (1 Management Unit)7010 Northern TerritoryAustralian Capital Territory (1 Management Unit)8010 ACTExternal (1 Management Unit)9060 Marine

As part of Phase Two of the National Landcare Program (NLP) the Australian Government's natural resource management (NRM) investments will be delivered within NLP Management Units. The NLP Management Units dataset is maintained for the purpose of authoritative reporting on the Australian Government's NRM investments. It is designed to cover all Australian territory where Australian Government funded NRM investments might be delivered.This dataset should not be used to represent legal boundaries (notwithstanding that some boundaries are defined by legislation in some states and territories). It is an administrative dataset developed for the purpose of reporting and public information. Alterations to either the attribution or boundaries of the data may occur in the future, for example to accord with changes to NRM delivery arrangements or to reflect revisions of state/territory regional boundaries.Current VersionThe 2020 version NLP Management Units dataset contains 58 separate mapping objects. These comprise:56 mainland Management Units. A separate object for Lord Howe Island (part of North Coast, NSW Management Unit) A "Marine NRM" Management Unit which combines Australia's Territorial Sea (from 3 nautical miles to 12 nautical miles) and Australia's Exclusive Economic Zone (to 200 nautical miles). It excludes coastal waters (to 3 nautical miles) which are part of the terrestrial NLP Management Units. It also excludes Ashmore & Cartier Islands, Australian Antarctic Territory, Christmas Island, Cocos & Keeling Islands, Macquarie Island, Heard & MacDonald Islands and Norfolk Island, and those parts of Australia's Territorial Sea and Exclusive Economic Zone that surround these locations.The 2020 version was derived from the former NRM regions series (latest version was 2020), originally established in 2006 as the "Natural Heritage Trust II (NHT2) Region Boundaries" dataset. No changes to the spatial alignment of terrestrial region boundaries was made in transitioning from NRM regions to NLP Management Units.The 2020 version updates the previous version (2017) with changes to boundaries of South Australian NRM Regions to align with new regional landscape boundaries (https://data.sa.gov.au/data/dataset/landscapes-sa-boundaries) under the Landscapes South Australia Act 2019 (SA) Act which replaced the Natural Resources Management Act 2004 (SA) Act. Minor edits were made to remove gaps, slivers and overlaps so the new SA boundaries aligned with non-SA NRM Regions. The "Hills and Fleurieu" and "Green Adelaide" Landscapes SA boundaries were merged to form the single 4010 "Adelaide and Mount Lofty Ranges" NRM Region, although at the request of the data owner, the internal boundaries were retained within this NRM region. Additionally a number of gaps and overlaps in the Western Australia NRM regions were fixed.The principle data fields in the 2020 version dataset are:NLP_MU (note this replaces the former NRM_Region field)State (state, territory or 'external' for the Marine NRM unit)Area_Description (eg land area only, state and coastal waters, )NRM_ID (as described below)NRM_ID and NLP_MU names, grouped by state/territory, are as follows:New South Wales (11 Management Units + 1 extra map object for Lord Howe Island)- 1010 Central Tablelands- 1020 Central West- 1030 Greater Sydney- 1040 Hunter- 1050 Murray- 1060 North Coast (excludes Lord Howe Island)- 1061 North Coast - Lord Howe Island- 1070 North West NSW- 1080 Northern Tablelands- 1090 Riverina- 1100 South East NSW- 1110 WesternVictoria (10 Management Units)- 2010 Corangamite- 2020 East Gippsland- 2030 Glenelg Hopkins- 2040 Goulburn Broken- 2050 Mallee- 2060 North Central- 2070 North East- 2080 Port Phillip and Western Port- 2090 West Gippsland- 2100 WimmeraQueensland (15 Management Units)- 3010 Burnett Mary- 3020 Cape York- 3030 Condamine- 3040 Co-operative Management Area (between Cape York and Northern Gulf)- 3050 Desert Channels- 3060 Fitzroy- 3070 Burdekin- 3080

The National Conservation Lands Database contains data on the location and nature of private lands protected and/or managed for conservation purposes in Australia. This data set was created as part of a collaborative project between the data contributors and the Australian Government. The project was governed by a Steering Committee with representatives from five of the nine data contributors listed below. These acronyms are used in the remainder of the data. The program that contributed the data is described in the Completeness section of the metadata.DEC: Western Australian Department of Environment and Conservation DECCW: New South Wales Department of Environment, Climate Change and WaterDEH: South Australia Department of Environment and Heritage - now the Department of Climate Change, Energy, the Environment and Water and Natural ResourcesDERM: Queensland Department of Environment and Resource ManagementDPIPWE: Tasmania Department of Primary Industries, Parks, Water and EnvironmentNCT: New South Wales Nature Conservation Trusts Covenanting program NRETAS: Northern Territory Department of Natural Resources, Environment, the Arts and Sport Covenanting ProgramNTA WA: The National Trust of Australia (WA) TFN: Trust For Nature (Victoria) This 2009 (first) version of the database includes the majority of high security mechanisms operating on private land in Australia, where conservation is the sole or key objective. The data set contains all agreements from the inception of the program through which they were delivered to (and including) those established on the 30 June 2009. The department intends to annually update the database.The database contains:- an NCLD_DESC table - that contains descriptions of each agreement- an NCLD_POLY feature class - that contains all the agreement polygons- a NCLD_LABEL layer - that contains one point for each agreement that fits within an agreement polygon- a NCLD_OVERLAP_POLY feature class -that contains all agreement polygons that overlapped higher level agreement polygons. This is explained below.The polygons in this data set represent the land subject to private land conservation agreements. Each agreement is uniquely identified by AGREMT_ID. There are two polygon layers associated with the database. The principle layer is called the NCLD_POLY feature class and contains polygons of the location of the agreements. Where there are overlapping agreements, the most secure agreement is represented in the polygon layer and those agreements that were of lower security and overlapped, have been removed from the agreement polygon layer and stored in the NCLD_OVERLAP_POLY feature class. The NCLD_POLY feature class and the NCLD_OVERLAP_POLY feature class attribute table that the AGREMT_ID and few other fields. The descriptive details of each agreement are stored in the NCLD_DESC table including the GIS_AREA for the convenience of calculating statistics. This text table can be linked to the polygon layers for GIS analysis. The attributes of the NCLD_DESC table are described in the Attribute Accuracy section of this metadata. Many of the attributes are the same as those used in the Collaborative Australian Protected Area Database .In order to facilitate topology checking and analysis the NCLD_POLY feature class does not contain overlapping polygons. Overlapping agreements do occur in practice, where there is more than one agreement legally still in place at a time. To capture this information the polygon data has been processed to represent the highest security agreement at any one location in the agreements polygon layer. Agreements that are completely displaced by a higher security agreement have the value in the OVERLAP field in the text table, a GIS_AREA of 0 (zero) and the entire polygon represented only in the NCLD_OVERLAP_POLY feature class. Agreements that are only partially displaced have the displaced portion of the polygon(s) in the NCLD_OVERLAP_POLY feature class. In the agreements text table