Satellite altimeter data from the radar altimeter on board the joint France/US Jason-1 Mission, comprising Global (66S -> 66N) sea surface height anomalies along ground tracks which are repeated every 10 days. The dataset is approximately 622 Mb and the period covered is January 2002 to January 2004. The data was provided by JPL/NASA in the USA and has been processed at CSIRO Marine Research in Hobart to a uniform grid spacing and format. Jason-1 is the follow-on mission to TOPEX/Poseidon. Available on-line on the CSIRO Marine Research network; also available to outside users on request.

Satellite altimeter data from the radar altimeter on board the European ERS-1 satellite, phase G, comprising Global (81S -> 81N) sea surface height anomalies along ground tracks which are repeated every 35 days. The dataset (which is combined online with phase C of the same mission) is approximately 190 Mb and the period covered is March 1995 to June 1996. The data was provided by Aviso/CNES in France and has been reformatted at CSIRO Marine Research in Hobart to a uniform grid spacing and format. Available on-line on the CSIRO Marine Research network; also available to outside users on request.

Satellite altimeter data from the radar altimeter on board the European ERS-1 satellite, phase C, comprising Global (81S -> 81N) sea surface height anomalies along ground tracks which are repeated every 35 days. The dataset (which is combined online with phase G of the same mission) is approximately 190 Mb and the period covered is October 1992 to December 1993. The data was provided by Aviso/CNES in France and has been reformatted at CSIRO Marine Research in Hobart to a uniform grid spacing and format. Available on-line on the CSIRO Marine Research network; also available to outside users on request.

These data consist of Geos-3 altimeter measurements produced by NOAA/NODC/Laboratory for Satellite Altimetry. The dataset contains 5,006,956 altimetric sea surface heights and supporting information such as sea state, wind speed, Schwiderski ocean tide height, and Cartwright solid-tide height. Corrections for altimeter bias, wet and dry troposheric delays, and electromagnetic bias are not included. The corrections in this dataset (tides and even orbit height) are old and not very accurate. This dataset should only be used by those with an expertise in altimetry. Measurements are compressed to a rate of 1 per second using a trim mean filter. Data values are written in binary format.

These data consist of Geos-3 altimeter measurements produced by NOAA/NODC/Laboratory for Satellite Altimetry. The dataset contains 5,006,956 altimetric sea surface heights and supporting information such as sea state, wind speed, Schwiderski ocean tide height, and Cartwright solid-tide height. Corrections for altimeter bias, wet and dry troposheric delays, and electromagnetic bias are not included. The corrections in this dataset (tides and even orbit height) are old and not very accurate. This dataset should only be used by those with an expertise in altimetry. Measurements are compressed to a rate of 1 per second using a trim mean filter. Data values are written in binary format.

These data are near-real-time (NRT) (within 7-9 hours of measurement) sea surface height anomalies (SSHA) from the AltiKa altimeter onboard the Satellite with ARgos and ALtiKa (SARAL). SARAL is a French(CNES)/Indian(SARAL) collaborative mission to measure sea surface height using the Ka-band AltiKa altimeter and was launched February 25, 2013. The major difference between these data and the Operational Geophysical Data Record (OGDR) data produced by the project is that the orbit from SARAL has been adjusted using SSHA differences with those from the OSTM/Jason-2 GPS-OGDR-SSHA product at inter-satellite crossover locations. This produces a more accurate NRT orbit altitude for SARAL with accuracy of 1.5 cm (RMS), taking advantage of the 1 cm (radial RMS) accuracy of the GPS-based orbit used for the OSTM/Jason-2 GPS-OGDR-SSHA product. This dataset also contains all data from the project (reduced) OGDR, and improved altimeter wind speeds and sea state bias correction. More information on the SARAL mission can be found at: http://www.aviso.oceanobs.com/en/missions/current-missions/saral.html

The Jason-1 Geophysical Data Records (GDR) Geodetic Mission contain full accuracy altimeter data, with a high precision orbit, provided approximately 35 days after data collection. The data are sorted into cycles that are approximately 11 days long and contain 280 pass files. The instruments on Jason-1 make direct observations of the following quantities: altimeter range, significant wave height, ocean radar backscatter cross-section (a measure of wind speed), ionospheric electron content (derived by a simple formula), tropospheric water content, mean sea surface, and position relative to the GPS satellite constellation. The GDR contain all relevant corrections needed to calculate the sea surface height.

Same as L2_NALT_GDR using predicted values for some auxiliary data, and does not have GIM ionosphere model values. Uses the onboard DORIS orbit ephemeris. Available with latency of < 7 hours. Discrete measurements at nadir for each data downlink, along the ground track. Available in netCDF-4 file format. This collection is a sub-collection of its parent: https://podaac.jpl.nasa.gov/dataset/SWOT_L2_NALT_OGDR_D