This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Adelaide) with SA2 code (41001). Planning provides detailed planning zone codes and descriptions for parcels of land across Australia. By representing the detailed planning classification for each parcel as well as links to the relevant planning scheme/instrument. Planning provides a simple lookup for the classification on sites nationally, as well as linkages to enable further understanding of a site's potential. Planning is created through combining Geoscape Australia's Cadastre product with Planning Zones defined by a State, Territory or Local Government. For more information regarding Geoscape Planning, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the information is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Planning zones provide a method to divide land and describe the types of development that may occur at a location, and often describe other developmental requirements such as the height, setback or form of the structures that can be built. Planning zones allow State, Territory and local Governments to facilitate urban planning and control the development of land. Through representing the planning classification from a planning zone at a Cadastre cadastral parcel level, Planning provides a granular representation of the potential for development at each site, alongside URL linkages to enable further research directly from the authoritative definition. This dataset has been restricted to the Adelaide SA2 by AURIN. AURIN has extracted the selected SA2 area information from this dataset through using geometries from the May 2022 Geoscape Cadastre release. The dataset, therefore, is a tabular dataset for the selected SA2 area.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Sydney) with SA2 code (11337). Planning provides detailed planning zone codes and descriptions for parcels of land across Australia. By representing the detailed planning classification for each parcel as well as links to the relevant planning scheme/instrument. Planning provides a simple lookup for the classification on sites nationally, as well as linkages to enable further understanding of a site's potential. Planning is created through combining Geoscape Australia's Cadastre product with Planning Zones defined by a State, Territory or Local Government. For more information regarding Geoscape Planning, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the information is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Planning zones provide a method to divide land and describe the types of development that may occur at a location, and often describe other developmental requirements such as the height, setback or form of the structures that can be built. Planning zones allow State, Territory and local Governments to facilitate urban planning and control the development of land. Through representing the planning classification from a planning zone at a Cadastre cadastral parcel level, Planning provides a granular representation of the potential for development at each site, alongside URL linkages to enable further research directly from the authoritative definition. This dataset has been restricted to the Sydney - Haymarket - The Rocks SA2 by AURIN. AURIN has extracted the selected SA2 area information from this dataset through using geometries from the May 2022 Geoscape Cadastre release. The dataset, therefore, is a tabular dataset for the selected SA2 area.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Perth) with SA2 code (51041). Planning provides detailed planning zone codes and descriptions for parcels of land across Australia. By representing the detailed planning classification for each parcel as well as links to the relevant planning scheme/instrument. Planning provides a simple lookup for the classification on sites nationally, as well as linkages to enable further understanding of a site's potential. Planning is created through combining Geoscape Australia's Cadastre product with Planning Zones defined by a State, Territory or Local Government. For more information regarding Geoscape Planning, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the information is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Planning zones provide a method to divide land and describe the types of development that may occur at a location, and often describe other developmental requirements such as the height, setback or form of the structures that can be built. Planning zones allow State, Territory and local Governments to facilitate urban planning and control the development of land. Through representing the planning classification from a planning zone at a Cadastre cadastral parcel level, Planning provides a granular representation of the potential for development at each site, alongside URL linkages to enable further research directly from the authoritative definition. This dataset has been restricted to the Perth City SA2 by AURIN. AURIN has extracted the selected SA2 area information from this dataset through using geometries from the May 2022 Geoscape Cadastre release. The dataset, therefore, is a tabular dataset for the selected SA2 area.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Hobart) with SA2 code (61027). Planning provides detailed planning zone codes and descriptions for parcels of land across Australia. By representing the detailed planning classification for each parcel as well as links to the relevant planning scheme/instrument. Planning provides a simple lookup for the classification on sites nationally, as well as linkages to enable further understanding of a site's potential. Planning is created through combining Geoscape Australia's Cadastre product with Planning Zones defined by a State, Territory or Local Government. For more information regarding Geoscape Planning, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the information is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Planning zones provide a method to divide land and describe the types of development that may occur at a location, and often describe other developmental requirements such as the height, setback or form of the structures that can be built. Planning zones allow State, Territory and local Governments to facilitate urban planning and control the development of land. Through representing the planning classification from a planning zone at a Cadastre cadastral parcel level, Planning provides a granular representation of the potential for development at each site, alongside URL linkages to enable further research directly from the authoritative definition. This dataset has been restricted to the Hobart SA2 by AURIN. AURIN has extracted the selected SA2 area information from this dataset through using geometries from the May 2022 Geoscape Cadastre release. The dataset, therefore, is a tabular dataset for the selected SA2 area.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Canberra) with SA2 code (81113). Planning provides detailed planning zone codes and descriptions for parcels of land across Australia. By representing the detailed planning classification for each parcel as well as links to the relevant planning scheme/instrument. Planning provides a simple lookup for the classification on sites nationally, as well as linkages to enable further understanding of a site's potential. Planning is created through combining Geoscape Australia's Cadastre product with Planning Zones defined by a State, Territory or Local Government. For more information regarding Geoscape Planning, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the information is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Planning zones provide a method to divide land and describe the types of development that may occur at a location, and often describe other developmental requirements such as the height, setback or form of the structures that can be built. Planning zones allow State, Territory and local Governments to facilitate urban planning and control the development of land. Through representing the planning classification from a planning zone at a Cadastre cadastral parcel level, Planning provides a granular representation of the potential for development at each site, alongside URL linkages to enable further research directly from the authoritative definition. This dataset has been restricted to the Canberra East SA2 by AURIN. AURIN has extracted the selected SA2 area information from this dataset through using geometries from the May 2022 Geoscape Cadastre release. The dataset, therefore, is a tabular dataset for cthe selected SA2 area.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Melbourne) with SA2 code (21122). Planning provides detailed planning zone codes and descriptions for parcels of land across Australia. By representing the detailed planning classification for each parcel as well as links to the relevant planning scheme/instrument. Planning provides a simple lookup for the classification on sites nationally, as well as linkages to enable further understanding of a site's potential. Planning is created through combining Geoscape Australia's Cadastre product with Planning Zones defined by a State, Territory or Local Government. For more information regarding Geoscape Planning, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the information is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Planning zones provide a method to divide land and describe the types of development that may occur at a location, and often describe other developmental requirements such as the height, setback or form of the structures that can be built. Planning zones allow State, Territory and local Governments to facilitate urban planning and control the development of land. Through representing the planning classification from a planning zone at a Cadastre cadastral parcel level, Planning provides a granular representation of the potential for development at each site, alongside URL linkages to enable further research directly from the authoritative definition. This dataset has been restricted to the Melbourne SA2 by AURIN. AURIN has extracted the selected SA2 area information from this dataset through using geometries from the May 2022 Geoscape Cadastre release. The dataset, therefore, is a tabular dataset for the selected SA2 area.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Darwin City) with SA2 code (71002). Buildings is a spatial dataset which represents Australia's built environment derived from remotely sensed imagery and aggregated data sources. The Buildings dataset has relationships with the G-NAF, Cadastre, Property and Administrative Boundaries products produced by Geoscape Australia. Users should note that these related Geoscape products are not part of Buildings. For more information regarding Geoscape Buildings, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the coverage area accessed by you can not be greater than a single Level 2 Statistical Area (SA2) as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Buildings is a digital dataset representing buildings across Australia. Data quality and potential capture timelines will vary across Australia based on two categories, each category has been developed based on a number of factors including the probability of the occurrence of natural events (e.g. flooding), population distribution and industrial/commercial activities. Areas with a population greater than 200, or with significant industrial/commercial activity in a visual assessment have been defined as 'Urban' and all other regions have been defined as 'Rural'. This dataset has been restricted to the Darwin City SA2 by AURIN.

This dataset is the June 2022 release of Geoscape Roads for a single SA2 area (Darwin) with SA2 code (71002). Roads is a digital representation of roads for Australia. This dataset provides an optimised aggregated national view of road geometry and attribution. The dataset is created from multiple sources including jurisdictional data which is revised regularly and supplied in varying formats and at different levels of quality. For more information regarding Geoscape Roads, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the coverage area is limited to a single Level 2 Statistical Area (SA2) mentioned above as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. The purpose of Roads is to provide a single national digital representation of Australian roads with detailed attribution to enable clients to undertake activities including visualisation, analysis and logistics planning at both a national and local scale. This dataset has been restricted to the Darwin City SA2 by AURIN.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Sydney - Haymarket - The Rocks) with SA2 code (11337). Buildings is a spatial dataset which represents Australia's built environment derived from remotely sensed imagery and aggregated data sources. The Buildings dataset has relationships with the G-NAF, Cadastre, Property and Administrative Boundaries products produced by Geoscape Australia. Users should note that these related Geoscape products are not part of Buildings. For more information regarding Geoscape Buildings, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the coverage area accessed by you can not be greater than a single Level 2 Statistical Area (SA2) as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Buildings is a digital dataset representing buildings across Australia. Data quality and potential capture timelines will vary across Australia based on two categories, each category has been developed based on a number of factors including the probability of the occurrence of natural events (e.g. flooding), population distribution and industrial/commercial activities. Areas with a population greater than 200, or with significant industrial/commercial activity in a visual assessment have been defined as 'Urban' and all other regions have been defined as 'Rural'. This dataset has been restricted to the Sydney - Haymarket - The Rocks SA2 by AURIN.

This dataset is the June 2022 release of Geoscape Planning for a single SA2 area (Brisbane City) with SA2 code (31105). Buildings is a spatial dataset which represents Australia's built environment derived from remotely sensed imagery and aggregated data sources. The Buildings dataset has relationships with the G-NAF, Cadastre, Property and Administrative Boundaries products produced by Geoscape Australia. Users should note that these related Geoscape products are not part of Buildings. For more information regarding Geoscape Buildings, please refer to the Data Product Description and the June 2022 Release Notes. Please note: As per the licence for this data, the coverage area accessed by you can not be greater than a single Level 2 Statistical Area (SA2) as defined by the Australian Bureau of Statistics. If you require additional data beyond a single SA2 for your research, please request a quote from AURIN. Buildings is a digital dataset representing buildings across Australia. Data quality and potential capture timelines will vary across Australia based on two categories, each category has been developed based on a number of factors including the probability of the occurrence of natural events (e.g. flooding), population distribution and industrial/commercial activities. Areas with a population greater than 200, or with significant industrial/commercial activity in a visual assessment have been defined as 'Urban' and all other regions have been defined as 'Rural'. This dataset has been restricted to the Brisbane City SA2 by AURIN.