The Mercury Passage marine habitat layer1: 25,000 depicts marine habitats from Cape Bougainville [148 00, -42 30] to Schouten Island [148 19, --42 20] from the coastline to the 40 metre depth. The habitat types depicted in the dataset include High profile reef, Medium profile reef, Low profile Reef, Patchy Reef, Sand, Hard Sand, Silty Sand, Silt, Seagrass, Patchy Seagrass, and Sparse Seagrass. The data was collected through intensive field sampling from November 2004 to December 2005 by marine researchers at the Tasmanian Aquaculture and Fisheries Institute. The use of underwater camera equipment, echo sounder data and a Differential GPS unit allowed for the extensive area to be surveyed. The dataset is intended to be used to fulfil coastal management objectives according to The Living Marine Resources Act 1995.

The Bicheno to Schouten Island Bathymetry 1:25000 depicts bathymetric contours from Diamond Island [148 17, -41 51] to Schouten Island [148 19, -42 22] from the coastline to 1500m from the coastline. The contour intervals are at 5 metre intervals. The dataset is intended to be used to fulfil coastal management objectives according to The Living Marine Resources Act 1995. It is not to be used for navigational purposes.

The Kent Group marine contour map 1:25000 depicts bathymetric contours from the coastlines of the islands of the Kent Group to the 3nm offshore limit. The contour intervals are at 5 metres. The dataset is intended to be used to fulfil coastal management objectives according to The Living Marine Resources Act 1995 and is not to be used for navigational purposes.

In 1999, the U.S. Geological Survey (USGS), in partnership with the South Carolina Sea Grant Consortium, began a study to investigate processes affecting shoreline change along the northern coast of South Carolina, focusing on the Grand Strand region. Previous work along the U.S. Atlantic coast shows that the structure and composition of older geologic strata located seaward of the coast heavily influences the coastal behavior of areas with limited sediment supply, such as the Grand Strand. By defining this geologic framework and identifying the transport pathways and sinks of sediment, geoscientists are developing conceptual models of the present-day physical processes shaping the South Carolina coast. The primary objectives of this research effort are: 1) to provide a regional synthesis of the shallow geologic framework underlying the coastal upland, shoreface and inner continental shelf, and define its role in coastal evolution and modern beach behavior; 2) to identify and model the physical processes affecting coastal ocean circulation and sediment transport, and to define their role in shaping the modern shoreline; and 3) to identify sediment sources and transport pathways; leading to construction of a regional sediment budget.

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2023, U.S. Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to collect topographic and bathymetric data. Images of the beach for use in structure-from-motion were taken with a camera (SONY a6000) and a post-processed kinematic (PPK) system attached to a helium powered balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model and orthomosaic with the collected imagery.

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2023, U.S. Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to collect topographic and bathymetric data. Images of the beach for use in structure-from-motion were taken with a camera (SONY a6000) and a post-processed kinematic (PPK) system attached to a helium powered balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model and orthomosaic with the collected imagery.

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2024-016-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of two video cameras aimed at the beach (CoastCam CACO-02). In March and April 2024, U.S. Geological Survey and Woods Hole Oceanographic Institution (WHOI) scientists conducted field surveys to collect topographic and bathymetric data. A camera (Ricoh GRII) attached to a helium filled balloon-kite (Helikite) took images of the beach for use in structure-from-motion. High-precision GPS targets (AeroPoints V2) were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 2.1.0) was used to create a digital surface model and orthomosaic with the collected imagery.

The data in this release map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2022, U.S Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to map the CoastCam field of view. Aerial images of the beach for use in structure from motion were taken with a camera (Sony a6000) and a post-processed kinematic (PPK) system attached to a helium filled balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model with the collected imagery, which was merged with the bathymetry in MATLAB (v. 2020b) to create a continuous topobathy product.

The data in this release map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2022, U.S Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to map the CoastCam field of view. Aerial images of the beach for use in structure from motion were taken with a camera (Sony a6000) and a post-processed kinematic (PPK) system attached to a helium filled balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model with the collected imagery, which was merged with the bathymetry in MATLAB (v. 2020b) to create a continuous topobathy product.

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University of New Brunswick.