This dataset is the primary data output from the north-east land resource assessment project undertaken in 2001-02. It contains soil and land information at a scale of 1:100 000 for all freehold land in north-east Victoria. It also includes generic soil erosion risk assessments and agricultural capability. At the map scale of this dataset soil-landform units are not homogeneous. For each defined soil-landform unit, dominant soil types were identified prior to assessing their capability to support various enterprises. Often a co-dominant and minor soil type have been described as part of this process. Importantly it should be noted that soil attributes (for example texture, sodicity, pH) are expected to vary between acquired soil sites. As the variability of soil attributes within a map unit is difficult to predict, it is important to note that representative soils should be used as a guide only. The study report describing the project methodology and dataset attributes is available from the Victorian Resources Online website (http://vro.depi.vic.gov.au/dpi/vro/neregn.nsf/pages/ne_soil_landform_survey) DOI 10.4226/92/58e71be578ac0

A spatial dataset of soil and landform classification in Gippsland. The map units are broad `packages' of land - divided primarily on the basis of soil type, landform pattern and geology. It contains soil and land information at a scale of 1:100 000 for all land in the region. The dataset has been derived from a combination of past studies and has been collated primarily by Ian Sargeant and Mark Imhof from 1994 to 2013. Data from older surveys have also been included in this consolidated dataset. Mapping in east and northern Gippsland regions is restricted to freehold lands. Webpages on Victorian Resources Online provide a description of each of the map units and indicate source studies used to define the map unit. In June 2013 a dominant soil type was assigned to each unit (by David Rees, Mark Imhof and Ian Sargeant) to facilitate the creation of a digital soil map of Victoria. Australian Soil Classification (Order and SubOrder) have been included in the dataset's attribute table. At the map scale of this dataset soil-landform units are not homogeneous. For each defined soil-landform unit, the number and proportion of landforms and soil types will vary. Representative sites and their associated profile properties are recorded on the Victorian Resources Online website (http://vro.depi.vic.gov.au/dpi/vro/wgregn.nsf/pages/wg_soil_detailed). Importantly it should be noted that soil attributes (for example texture, sodicity, pH) are expected to vary between acquired soil sites. As the variability of soil attributes within a map unit is difficult to predict, it is important to note that representative soils should be used as a guide only. DOI 10.4226/92/58e719aeb6e7c

This dataset is the primary data output from the Glenelg Hopkins land resource assessment project undertaken in 1999-2001. It contains soil and land information at a scale of 1:100 000 for all land in the south western corner of Victoria. The study also includes generic soil erosion risk assessments and agricultural capability, although these are mapped in separate datasets. At the map scale of this dataset soil-landform units are not homogeneous. For each defined soil-landform unit, the number and proportion of landforms and soil types will vary. A dominant soil type has been identified within each unit and soil property attributes provided by 'representative' sites. Importantly it should be noted that soil attributes (for example texture, sodicity, pH) are expected to vary between acquired soil sites. As the variability of soil attributes within a map unit is difficult to predict, it is important to note that representative soils should be used as a guide only. The study report describing the project methodology and dataset attributes is available from the Victorian Resources Online website (http://vro.depi.vic.gov.au/dpi/vro/glenregn.nsf/pages/glenelg_soil_map). DOI 10.4226/92/58e717be5073e

The land systems of Victoria, as described and delineated by Rowan in 1989, provide a statewide coverage of land types that are applicable to a wide range of land resource management and planning programs. These land systems sit within a geomorphological framework developed by Jenkin and Rowan. This data set consolidates a broad range of land resource information drawn from an uneven base to provide a consistent, if limited, coverage of the lands of Victoria. The explicit links with the original sources of data have been retained. The data set was developed from a range of studies of varying methodologies and intensities over some forty years. The reliability of the information varies across regions accordingly. This edition (3) incorporates new survey material [Shires of West Wimmera, Lowan, West Towong and East Gippsland (east of Snowy River)] as well as changes in the nomenclature with the substitution of broad slope class with relative relief classes (eg. plains, hills, mountains). An addition factor (lithological age) was also added to the key. There is still a link with the Edition 2 version in the main Land Systems table. More information on land system mapping can be found on Victorian Resources Online http://vro.depi.vic.gov.au/dpi/vro/vrosite.nsf/pages/landform_systems DOI 10.4226/92/58e727e0dd1be

This dataset is the primary data output from the Wimmera land resource assessment project undertaken in 2004-06. It contains soil and land information at a scale of 1:100 000 for all freehold land in the Wimmera region of Victoria. The dataset was developed by the project "A Land Resource Assessment of the Wimmera Region" conducted by Robinson et al. (2006). This project was undertaken by DPI's PIRVic Division for the Wimmera Catchment Management Authority to provide consistent land resource information across the region. It utilised data from existing soil surveys at varying scales and intensity conducted over the previous 60 years, remote sensing information and additional field work to develop updated 1:100 000 scale soil/landform mapping across the region. The nominal scale of the dataset is appropriate for broadscale assessment of land capability and regional planning. At the map scale of this dataset soil-landform units are not homogeneous. For each defined soil-landform unit, soil types were identified and an assessment of their risk of degradation (compaction, erosion, sodicity and acidity) was made. Importantly it should be noted that soil attributes (for example texture, sodicity, pH) are expected to vary between acquired soil sites. As the variability of soil attributes within a map unit is difficult to predict, it is important to note that representative soils should be used as a guide only. The study report describing the project methodology and dataset attributes is available from the Victorian Resources Online website. DOI 10.4226/92/58e729e8aea3e

The land systems of Victoria, as described and delineated by Rowan in 1989, provide a statewide coverage of land type that are applicable to a wide range of land resource management and planning programs. This dataset consolidates a broad range of land resource information drawn from an uneven base to provide a consistent, if limited, coverage of the lands of Victoria. The explicit links with the original sources of data have been retained. The data set was developed from a range of studies of varying methologies and intensities over some forty years. The reliability of the information varies across regions accordingly.

This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied and contains boundary and attribute information for parcels of public, private and Aboriginal lands in Australia. Data are sourced primarily from government gazette notices, cadastral maps and plans. A nominal scale of around 1:5 million and a minimum 50 square kilometre threshold limit for land parcels was used in the generalisation of this product from the National Public and Aboriginal Lands data. Data is suitable for GIS applications. This map shows public and private land tenure, including Indigenous land for the whole of Australia at a scale of 1:4.7 million. The land tenure boundaries depicted on this map generally define broadly classified areas greater than 50 square kilometres. Indigenous land areas between 0.1 and 100 square kilometres are shown more comprehensively by symbols. The information on this map is complemented by statistical tables giving the total area of the land tenure categories for each State and Territory. This map is also available as free vector GIS data, ArcInfo Export, ArcView Shapefile and MapInfo mid/mif. Please direct any corrections or feedback on this map to mapfeedback@ga.gov.au. Product Specifications: Coverage: Australia Currency: Mid 1993 Coordinates: Geographical Datum: AGD66 Projection: Simple Conic on two standard parallels 18S and 36S Medium: Printed map (flat and folded). ANZLIC unique identifier: ANZCW0703005424. Metadata Statement.

This dataset is the primary data output from the Goulburn Broken Dryland Regional Development Project conducted from 1998 to 2000. It contains soil and land information at a scale of 1:100 000 for all land in the region. At the map scale of this dataset soil-landform units are not homogeneous. For each defined soil-landform unit, the number and proportion of landforms and soil types will vary. A group or groups of soils have been associated with each unit. Representative sites and their associated profile properties are recorded in the study report. Importantly it should be noted that soil attributes (for example texture, sodicity, pH) are expected to vary between acquired soil sites. As the variability of soil attributes within a map unit is difficult to predict, it is important to note that representative soils should be used as a guide only.

A spatial map layer of soil type (Australian Soil Classification) for Victoria. The harmonised map consists of 3,300 land units (totaling about 225,000 polygons) derived from around 100 soil and land surveys carried out in Victoria over the past 70 years. The land units have been attributed according to the Australian Soil Classification (Order and Suborder levels of the classification scheme) based on their likely dominant soil type. Particular attention was given to harmonising land units across survey boundaries. A reliability index has been assigned to each land unit based on the quality and relevance of the originating survey, providing a qualitative reliability measure to support interpretation and data use. Soil site data contained in the Victorian Soil Information System (VSIS), and information on the Victorian Resources Online (VRO) website and original study reports have been combined with landscape knowledge to develop the new maps. Data from approximately 10,000 existing sites recorded, mostly recorded in the VSIS have been used. The soil type is based on land mapping conducted at different times, at variable scale, and for different purposes. Land units are therefore of variable scale and quality in relation to the soil they are representing. Many units will be comprised of multiple soil types and a range of soil properties, and local variability (e.g. at paddock scale level) can also sometimes be high. The mapping, therefore, is intended to represent the dominant, or most prevalent, broad soil type within the map unit. It is therefore adequate for regional or state-wide overviews but may not often be accurate enough for localised or within-farm assessments. For more detailed soil and land information, users are advised to refer to the original land study for any given map unit (e.g. via Victorian Resources Online website).