The MODIS Land Cover Type product contains five classification schemes, which describe land cover properties derived from observations spanning a years input of Terra- and Aqua-MODIS data. The primary land cover scheme identifies 17 land cover classes defined by the International Geosphere Biosphere Programme (IGBP), which includes 11 natural vegetation classes, 3 developed and mosaicked land classes, and three non-vegetated land classes.

The MODIS Land Cover Type product (Short Name: MCD12Q1) provides data characterizing five global land cover classification systems. In addition, it provides a land-cover type assessment, and quality-control information.

This data set, ISLSCP II MODIS (Collection 4) IGBP Land Cover, 2000-2001, contains global land cover classifications (dominant type, classification confidence and fractional cover) generated using a full year of MODerate Resolution Imaging Spectroradiometer (MODIS) data covering the period from October 2000 to October 2001. The objective of the MODIS Land Cover Product is to provide a suite of land cover types useful to global system science modelers by exploiting the information content of MODIS data in the spectral, temporal, spatial, and directional domains. These products describe the geographic distribution of the 17 land cover classification scheme proposed by the International Geosphere-Biosphere Programme (IGBP).

This data set, ISLSCP II MODIS (Collection 4) IGBP Land Cover, 2000-2001, contains global land cover classifications (dominant type, classification confidence and fractional cover) generated using a full year of MODerate Resolution Imaging Spectroradiometer (MODIS) data covering the period from October 2000 to October 2001. The objective of the MODIS Land Cover Product is to provide a suite of land cover types useful to global system science modelers by exploiting the information content of MODIS data in the spectral, temporal, spatial, and directional domains. These products describe the geographic distribution of the 17 land cover classification scheme proposed by the International Geosphere-Biosphere Programme (IGBP).

The Terra and Aqua combined Moderate Resolution Imaging Spectroradiometer (MODIS) Land Cover Type (MCD12Q1) Version 6.1 data product provides global land cover types at yearly intervals (2001-2022). The MCD12Q1 Version 6.1 data product is derived using supervised classifications of MODIS Terra and Aqua reflectance data. Land cover types are derived from the International Geosphere-Biosphere Programme (IGBP), University of Maryland (UMD), Leaf Area Index (LAI), BIOME-Biogeochemical Cycles (BGC), and Plant Functional Types (PFT) classification schemes. The supervised classifications then undergo additional post-processing that incorporate prior knowledge and ancillary information to further refine specific classes. Additional land cover property assessment layers are provided by the Food and Agriculture Organization (FAO) Land Cover Classification System (LCCS) for land cover, land use, and surface hydrology. Layers for Land Cover Type 1-5, Land Cover Property 1-3, Land Cover Property Assessment 1-3, Land Cover Quality Control (QC), and a Land Water Mask are provided in each MCD12Q1 Version 6.1 Hierarchical Data Format 4 (HDF4) file.Known Issues* The "units" field is missing in the metadata, however, this information can be found in Table 1 of the User Guide.* The MCD12Q1.061 land cover data product is derived using supervised classification of MODIS Terra and Aqua reflectance data. The classification algorithm uses labeled training samples selected globally to represent land cover categories derived under the IGBP, UMD, LAI, BIOME-BGC, and PFT classification schemes. These training samples were selected to represent land classes, best suited over a certain period. However, due to lack of funding, the science team was not able to keep the training database updated over the course of the years, and some of these training sites could well have undergone changes in their land cover characteristics, especially after 2021. Hence users are urged to maintain caution while using the V6.1/MCD12Q1 land cover layers for 2021 and beyond. More information on this known issue can be found in the [Land Data Products Operational Products (LDOPE) Quality Assessment](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=781).* Known issues are described in Section 2.2 of the User Guide.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=TerraAqua&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The MCD12Q1 Version 6.1 product has a minor fix to UMD Land Cover Class.

The Terra and Aqua combined Moderate Resolution Imaging Spectroradiometer (MODIS) Land Cover Climate Modeling Grid (CMG) (MCD12C1) Version 6.1 data product provides a spatially aggregated and reprojected version of the tiled [MCD12Q1 Version 6.1](https://doi.org/10.5067/MODIS/MCD12Q1.061) data product. Maps of the International Geosphere-Biosphere Programme (IGBP), University of Maryland (UMD), and Leaf Area Index (LAI) classification schemes are provided at yearly intervals at 0.05 degree (5,600 meter) spatial resolution for the entire globe from 2001 to 2022. Additionally, sub-pixel proportions of each land cover class in each 0.05 degree pixel is provided along with the aggregated quality assessment information for each of the three land classification schemes. Provided in each MCD12C1 Version 6.1 Hierarchical Data Format 4 (HDF4) file are layers for Majority Land Cover Type 1-3, Majority Land Cover Type 1-3 Assessment, and Majority Land Cover Type 1-3 Percent.Known Issues* Known issues are described in Section 2.2 of the User Guide.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The MCD12C1 Version 6.1 product has a minor fix to UMD Land Cover Class.

The objective of the International Satellite Land Surface Climatology Project (ISLSCP II) study that produced this data set, ISLSCP II University of Maryland Global Land Cover Classifications 1992-1993, was to create a land cover map derived from 1 kilometer Advanced Very High Resolution Radiometer (AVHRR) data using all available bands, derived Normalized Difference Vegetation Index (NDVI), and a full year of data (April 1992-March 1993). This thematic map was resampled to 0.25, 0.5 and 1.0 degree grids. During this re-processing, the original University of Maryland (UMD) land cover type and fraction maps were adjusted to match the water/land fraction of the ISLSCP II land/water mask. These maps were generated for use by modelers of global biogeochemical cycles and others in need of an internally consistent, global depiction of land cover. This 1km map was also one of the MODerate resolution Imaging Spectroradiometer (MODIS) at-launch land cover maps. This product describes the geographic distributions of 13 classes of vegetation cover (plus water and unclassified classes) based on a modified International Geosphere-Biosphere Programme (IGBP) legend. The data set also provides the fraction of each of the 15 classes within the coarser resolution cells, at three spatial resolutions of 0.25, 0.5 and 1.0 degrees in latitude and longitude.

The objective of the International Satellite Land Surface Climatology Project (ISLSCP II) study that produced this data set, ISLSCP II University of Maryland Global Land Cover Classifications 1992-1993, was to create a land cover map derived from 1 kilometer Advanced Very High Resolution Radiometer (AVHRR) data using all available bands, derived Normalized Difference Vegetation Index (NDVI), and a full year of data (April 1992-March 1993). This thematic map was resampled to 0.25, 0.5 and 1.0 degree grids. During this re-processing, the original University of Maryland (UMD) land cover type and fraction maps were adjusted to match the water/land fraction of the ISLSCP II land/water mask. These maps were generated for use by modelers of global biogeochemical cycles and others in need of an internally consistent, global depiction of land cover. This 1km map was also one of the Moderate resolution Imaging Spectroradiometer (MODIS) at-launch land cover maps. This product describes the geographic distributions of 13 classes of vegetation cover (plus water and unclassified classes) based on a modified International Geosphere-Biosphere Programme (IGBP) legend. The data set also provides the fraction of each of the 15 classes within the coarser resolution cells, at three spatial resolutions of 0.25, 0.5 and 1.0 degrees in latitude and longitude.

This data set contains hydrology, soils, radiation, cloud, and vegetation data from the International Satellite Land Surface Climatology Project (ISLSCP) Initiative I. The ISLSCP data sets should provide LBA modelers with many of the fields required to describe boundary conditions, and to initialize and force a wide range of land-biosphere-atmosphere models. All of the data have been processed to the same global spatial resolution (1 deg. x 1 deg.), using the same land/sea mask and steps have been taken to ensure spatial and temporal continuity of the data. The data sets cover the period 1987-1988 at 1-month time resolution for most of the seasonally varying quantities. For this pre-LBA data set, the ISLSCP I data are provided as global coverages. The companion file illustrations were subset over the LBA study area, from 35-85 deg. W longitude and 20 deg. S to 10 deg. N latitude, as shown in Figure 1.The data files and illustrations are organized into the three groups listed below.1. Hydrology and Soils2. Radiation and Clouds3. VegetationThe data within each of these areas were acquired from a variety of sources including model output, satellites, and ground measurements. The individual data sets were provided in a variety of forms. In some cases, this required the data publication team to regrid and reformat data sets and in others to produce monthly averages from finer resolution data. The specific processing for each data set is detailed in the documentation. The processed, quality controlled and integrated data in the documented Pre-LBA Data sets were originally published as a set of three CD-ROMs (Marengo and Victoria, 1998) but are now archived individually.

This data set contains hydrology, soils, radiation, cloud, and vegetation data from the International Satellite Land Surface Climatology Project (ISLSCP) Initiative I. The ISLSCP data sets should provide LBA modelers with many of the fields required to describe boundary conditions, and to initialize and force a wide range of land-biosphere-atmosphere models. All of the data have been processed to the same global spatial resolution (1 deg. x 1 deg.), using the same land/sea mask and steps have been taken to ensure spatial and temporal continuity of the data. The data sets cover the period 1987-1988 at 1-month time resolution for most of the seasonally varying quantities. For this pre-LBA data set, the ISLSCP I data are provided as global coverages. The companion file illustrations were subset over the LBA study area, from 35-85 deg. W longitude and 20 deg. S to 10 deg. N latitude, as shown in Figure 1.The data files and illustrations are organized into the three groups listed below.1. Hydrology and Soils2. Radiation and Clouds3. VegetationThe data within each of these areas were acquired from a variety of sources including model output, satellites, and ground measurements. The individual data sets were provided in a variety of forms. In some cases, this required the data publication team to regrid and reformat data sets and in others to produce monthly averages from finer resolution data. The specific processing for each data set is detailed in the documentation. The processed, quality controlled and integrated data in the documented Pre-LBA Data sets were originally published as a set of three CD-ROMs (Marengo and Victoria, 1998) but are now archived individually.