This data provides daily accumulated water usage volumes supplied from the 10 Melbourne Water storages. This data is collected using more than 120 Flow Monitoring devices across Melbourne Water's Water Transfer Pipe Network, linked to the Telemetry System. Melbourne Water collects and stores observations at six minute intervals. This data summarises the usage volume supplied by Melbourne Water over a 24 hour period (8am to 8am). Water recipients include 3 metro water retailer companies and 5 regional water authorities. This data set is best used in long and short term water demand analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the volume of sewage pumped through ETP on an hourly basis. NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Daily accumulated electricity supply (kWh) and daily accumulated electricity generation (kWh) into the Eastern Treatment Plant (ETP) of Melbourne Water. This data is collected using revenue quality meters across each supply line (feeder) into the plant, and Melbourne Water owned power meters for generation measurements. Melbourne Water collects and stores this feeder data as 15 minute interval data, and the generation data at real time. The data in this file summarises the electricity consumption and generation as daily usage. The time period associated with each day has been converted to a UTC time zone. This data set allows year on year comparison or daily usage against atmospheric changes i.e. temperature variance, rainfall. Feeder 1 and Feeder 2 can be combined to obtain the total Grid Electricity Consumption for ETP, and combined with the total electricity Generation to obtain the total Electricity consumption for ETP. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the quality of the sewage received by providing results of regular sampling. The sample is taken with a flow-weighted auto-sampler. Samples are collected at 7:00 AM each day and relate to the previous 24 hours (e.g. timestamp of 5/1/19 07:00 was sampled between 4/1/19 07:00 and 5/1/19 07:00). Results are in milligrams per litre (mg/L). To calculate an incoming load in raw sewage, match this with wastewater inlet hourly flow for the same time period (as noted in the example). Quality parameters include: Ammonia (Ammonia as N) (mg/L), Biochemical Oxygen Demand (BOD) (mg/L), Chemical Oxygen Demand (COD) (mg/L), Nitrate plus Nitrite (mg/L), Nitrogen (Nitrogen (total)) (mg/L). NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Daily accumulated electricity supply (kWh) and daily accumulated electricity generation (kWh) into the Eastern Treatment Plant (ETP) of Melbourne Water. This data is collected using revenue quality meters across each supply line (feeder) into the plant, and Melbourne Water owned power meters for generation measurements. Melbourne Water collects and stores this feeder data as 15 minute interval data, and the generation data at real time. The data in this file summarises the electricity consumption and generation as daily usage. The time period associated with each day has been converted to a UTC time zone. This data set allows year on year comparison or daily usage against atmospheric changes i.e. temperature variance, rainfall. Feeder 1 and Feeder 2 can be combined to obtain the total Grid Electricity Consumption for ETP, and combined with the total electricity Generation to obtain the total Electricity consumption for ETP.NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Melbourne Water treats effluent to Class A recycled water standard. A proportion of this water is used onsite and provided to retail water companies to sell to recycled water customers. This file contains annual volumes of recycled water use and sales as reporting in the organisation's annual report. NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This data contains points representing drain and waterway outlet locations, associated with a natural waterway or channel centreline, within the Greater Melbourne region. This region includes the Port Phillip Bay and Western Port coastlines. Points are captured to show the indicative location of the endpoint for a waterway or channel as geographic coordinates. The data table includes minimal attributes to assist in identifying the feature. Data was created using the waterway (Reach) layer from original FIS 1:50K (Vicmap Hydro) streams data set, which included only those waterways within catchments of greater than 60ha. Waterways (Reach) Rectification project undertaken 2001 to 2003 to review and correct the extent of the waterways reach network to ensure a complete data set exists (using the Drainage Metropolis Boundary, 50K data, 1:2500 Drainage Record Plans, Drainage Limits data, orthophotos, as constructed and/or design drawings, contour data and Melway Street Directory). Waterway (Reach) extents defined and attributes populated in GIS and AMIS for all records including assigning nodes and node numbers (for start / end points) and removing any reaches less than 100 metres in length that are predominantly channel assets. Waterways in extended area incorporated in 2005 using Vicmap Hydro data and aerial imagery, then updated in 2009/10 using Lidar survey data (contours). Data is maintained using Lidar survey data (contours) and 60 ha limits. Please refer to metadata for each dataset row record for specific source / accuracy information. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Eastern Treatment Plant (ETP) discharges treated effluent in accordance with EPA Victoria licence AL74284 to an ocean outfall at Boag Rocks. This file contains selected discharge quality data. Samples are taken as a grab sample at the time stamp shown in the file. Results are in milligrams per litre. Quality parameters include: Ammonia (Ammonia as N) (mg/L), Biochemical Oxygen Demand (BOD) (mg/L), Chemical Oxygen Demand (COD) (mg/L), Nitrate plus Nitrite (mg/L), Nitrogen (Nitrogen (total)) (mg/L). NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This dataset provides daily measured streamflows into the four (4) major harvesting catchment dams in megalitres (ML). The streamflow is a calculated value which represents the observed 24-hour accumulated streamflow into the dam; net of any evaporation losses or rainfall gains from the dam surface. The streamflow measurement process requires reservior level, reservior gains and dam outflow data. The reservior level and dam outflow data is collected using telemetry devices. The reserviour levels are validated by Melbourne Water field operators. The dam outflow accounts for all water releases, including for consumption and for environmental purposes . The data is recorded at 8am daily. This data can be used in long and short-term catchment streamflow analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Daily observed Storage Dam Volumes at 10 Water Storage Dams operated by Melbourne Water. This data is collected with telemetry devices installed at the storage dams, and verified with field observations. The storage volume is recorded at 8:00 am daily. This data is best used in long term storage volume analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.