This dataset shows land parcels owned by Melbourne Water that have potential to be utilised for liveability related projects. The data does not provide a guarantee that the land can be used, or used by any particular activity. Authority to use the land will still need to be assessed and granted by Melbourne Water. Due to the restrictive nature of potentially using land containing assets such as pipes, pits, retarding basins etc the land has been classified into three landuse types. These types describe the potential for using the land area for different purposes. Land classified as "A" (or "Likely Available") are those area that are likely to be available for community projects and could be used for a variety of purposes depending on the space. Land classified as "L" (or "Restrictions Apply") are areas likely to be available for small scale or portable infrastructure such as park benches, goal posts, landscaping and temporary food vans. They are unlikely to be available for large scale infrastructure due to access, drainage, safety, current lease or licence agreements or other requirements. Land classified as "X" (or "Access Only") are areas likely to be available for access related activities such as walking, running or yoga. 24 hour access is usually required and infrastructure is unlikely to be permitted. To apply, visit: Our Space Your PlaceApproximately 100 Melbourne Water asset datasets were used in the creation of this dataset. Rules governing the use of land on and around each asset class were established and applied to these areas. Coverage is across approximately 80% of MW owned land areas. The next edition aims to increase this to all applicable MW owned land.For more details: Land and Community Projects (link to MW website)NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing polygons that denote the location and extent of parcels of land that are owned by Melbourne Water. This layer is intended to be used to identify Melbourne Water owned land and responsibilities for the management of Melbourne Water assets. Layer shows general location of assets only and so cannot be used for detailed mapping or analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This data contains the spatial boundaries for Melbourne Water's area of responsibility for drainage and waterway assets.

This data contains points representing drain and waterway outlet locations, associated with a natural waterway or channel centreline, within the Greater Melbourne region. This region includes the Port Phillip Bay and Western Port coastlines. Points are captured to show the indicative location of the endpoint for a waterway or channel as geographic coordinates. The data table includes minimal attributes to assist in identifying the feature. Data was created using the waterway (Reach) layer from original FIS 1:50K (Vicmap Hydro) streams data set, which included only those waterways within catchments of greater than 60ha. Waterways (Reach) Rectification project undertaken 2001 to 2003 to review and correct the extent of the waterways reach network to ensure a complete data set exists (using the Drainage Metropolis Boundary, 50K data, 1:2500 Drainage Record Plans, Drainage Limits data, orthophotos, as constructed and/or design drawings, contour data and Melway Street Directory). Waterway (Reach) extents defined and attributes populated in GIS and AMIS for all records including assigning nodes and node numbers (for start / end points) and removing any reaches less than 100 metres in length that are predominantly channel assets. Waterways in extended area incorporated in 2005 using Vicmap Hydro data and aerial imagery, then updated in 2009/10 using Lidar survey data (contours). Data is maintained using Lidar survey data (contours) and 60 ha limits. Please refer to metadata for each dataset row record for specific source / accuracy information. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This data was collected in June 2019 from 799 residents aged 18+ in the Greater Melbourne Region to capture and monitor: -Community perceptions and concerns about water in Melbourne -Awareness and attitudes toward water sources -Attitude towards water conservation and restrictions -Water literacy in the community -Perceptions of Melbourne Water’s brand and industry performance -Exposure to flood and understanding of flood management and responsible authorities. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This data was collected in June 2019 from 799 residents aged 18+ in the Greater Melbourne Region to capture and monitor: -Community perceptions and concerns about water in Melbourne -Awareness and attitudes toward water sources -Attitude towards water conservation and restrictions -Water literacy in the community -Perceptions of Melbourne Water’s brand and industry performance -Exposure to flood and understanding of flood management and responsible authorities. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Location and extent of Melbourne Water natural and constructed (man-made) wetlands and lakes. Captured using the Top Water Level (TWL) of each, includes wetland or lake name, asset section (for As Constructed drawings) and key attributes. Data set required to indicate the location and types of assets used for stormwater treatment (treatment and removal of pollutants from the stormwater system) and flow management (helping maintain the flow of water and reduce the impacts of floods), for ongoing condition monitoring, maintenance and hydrologic or vegetation analysis and to assist with the planning and design, construction of future stormwater management (WSUD) options. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing line objects delineating hydrological features, representing waterways managed by Melbourne Water (i.e. catchment size is greater than 60 hectares) that have not been significantly modified by human activity. Captured by digitizing a line along the centre of a linear geographic feature. Includes the waterway name, a unique asset identifier, EPMS/asset section number (to link the object to associated drawings) and key attributes to assist with its intended purpose. When used in conjunction with the constructed waterways centreline and waterway connector centreline layers, this layer completes the waterway/hydrology linear network (complete centreline) for Melbourne Water’s non-underground drainage assets. Data set is used to indicate the location and types of natural waterways for asset management and maintenance works, to assess buildover or planning applications, for waterway rehabilitation works and flow management (helping maintain the flow of water and reduce the impacts of floods), ongoing condition monitoring and hydrologic modelling and analysis and to assist with the planning and design, construction of new waterway corridors, stormwater management (WSUD) options. Waterway (Reach) layer created from original FIS 1:50K (Vicmap Hydro) streams data set which included only those waterways within catchments of greater than 60ha. Waterways (Reach) Rectification project undertaken 2001 to 2003 to review and correct the extent of the waterways reach network to ensure a complete data set exists (using the Drainage Metropolis Boundary, 50K data, 1:2500 Drainage Record Plans, Drainage Limits data, orthophotos, as constructed and/or design drawings, contour data and Melway Street Directory). Waterway (Reach) extents defined and attributes populated in GIS and AMIS for all records including assigning nodes and node numbers (for start / end points) and removing any reaches less than 100 metres in length that are predominantly channel assets. Waterways in extended area incorporated in 2005 using Vicmap Hydro data and aerial imagery, then updated in 2009/10 using Lidar survey data (contours). Data is maintained using Lidar survey data (contours) and 60 ha limits. Please refer to metadata for each record in dataset for specific source / accuracy information. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This point dataset shows the locations of Water Meters in the Australian Capital Territory. These assets are either owned or managed by City Services, Transport Canberra and City Services Directorate (TCCS) and Parks and Conservation Service, Environment, Planning and Sustainable Development Directorate (EPSDD). Assets managed and / or owned privately, by other ACT Government Directorates or by the Federal Government may not be included.Attributes include location description, suburb, ownership, maintained by, asset sub type (Barbeque Tap, Drinking Fountain, Flow Meter, Non Potable Irrigation From Waterways, Stream Gauge, Supply From Service Lines, Supply To Facility Or Building, Supply To Irrigation System, Water Data Logger), meter number and make and model where available.These assets are captured and maintained in the asset database through the works as executed (WAE) handover process or field audits.For additional information, please see the relevant municipal infrastructure standard (https://www.cityservices.act.gov.au/plan-and-build/standards-codes-and-guidelines/municipal-infrastructure-design-standards-mis).

Catchment area for each Melbourne Water drain. Captured using available contours and drainage network information. This layer has two intended purposes:,