Access API NSW Administration Boundaries - ABS State Electoral Divisions 2021 State Electoral Divisions (SED) are an ABS Mesh Block approximation of state electoral districts. A state electoral district is an area legally prescribed for the purpose of returning one or more members to the State or Territory Lower Houses of Parliament, or the relevant equivalent. Boundaries are based on the most up to date state electoral districts available prior to publication. State Electoral Divisions may change as State or Territory authorities revise their boundaries. Where this occurs, State Electoral Divisions will be updated on an annual basis in conjunction with updates of other Non ABS Structures. Please note that ABS approximated boundaries do not match official legal or administrative boundaries and should only be used for statistical purposes. Further information about these regions can be found in the following publication: Australian Statistical Geography Standard (ASGS) Edition 3 https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026

Export DataAccess APIAdministrative Boundaries Theme – Local Government AreaPlease Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new multiCRS functionality.Metadata Portal Metadata InformationContent TitleNSW Administrative Boundaries Theme - Local Government AreaContent TypeHosted Feature LayerDescriptionNSW Local Government Area is a dataset within the Administrative Boundaries Theme (FSDF). It depicts polygons of gazetted boundaries defining the Local Government Area. It contains all of the cadastral line data or topographic features which are used to define the boundaries between adjoining shires, municipalities, cities (Local Government Act) and the unincorporated areas of NSW.The dataset also contains Council Names, ABS Codes, Ito Codes, Vg Codes, and Wb Codes. Any changes that occur to the dataset should have a reference in the authority of reference feature class in the Land Parcel and Property.Features are positioned in topological alignment within the extents of the land parcel and property polygons for each Local Government Area and are held in alignment, including changes resulting cadastral maintenance and upgrades.Initial Publication Date05/05/2020Data Currency01/01/3000Data Update FrequencyDailyContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:4326WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Information about the Feature Class and Domain Name descriptions for the NSW Administrative Boundaries Theme can be found in the NSW Cadastral Data Dictionary.Some of Spatial Services Datasets are designed to work together for example NSW Address Point and NSW Address String (table), NSW Property (Polygon) and NSW Property Lot (table) and NSW Lot (polygons). To do this you need to add a Spatial Join.A Spatial Join is a GIS operation that affixes data from one feature layer’s attribute table to another from a spatial perspective.To see how NSW Address, Property, Lot Geometry data and tables can be spatially joined, download the Data Model Document. Data CustodianDCS Spatial Services346 Panorama AveBathurst NSW 2795Point of ContactPlease contact us

Export DataAccess API NSW Administrative Boundaries Theme Please Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new multiCRS functionality. Metadata Portal Metadata Information Content TitleNSW Administrative Boundaries ThemeContent TypeHosted Feature LayerDescriptionThe Administrative Boundaries theme from NSW Foundation Spatial Data Framework (FSDF) is a collection of legislative, regulatory, political, maritime and general administrative boundaries sourced from local and state boundary datasets. They include:ParishCountySuburbLocal Government AreaState Electoral DistrictFederal Electoral DivisionMines SubsidenceDistrict NSW Parks and Wildlife Service ReserveState Forest Domestic Water Front PrecinctThe Administrative Boundaries theme is used to show administrative areas that represent:Voting DistrictsRedistributionsZoning Socio-Economic analysisRegional PlanningService DistributionLocal and State Government BoundariesIn addition, Administrative Boundaries can be used for analysis and to look at trends over time. Administrative boundary data in combination with geo-coded address data, demographic information and agency specific business information underpins the ability to perform high quality spatial analysis.The use of this data in combination with other data includes:Evidence-based development and assessment of government policyProviding the ability to undertake spatial accountingRegional analysis for government, health, education, business and a range of other purposesSupport for emergency managementMarket catchment analysis, micromarketing, customer analysis and market segmentationEmergency management.Update frequencies vary for each dataset. Individual current status can be found under each spatial data profile.Initial Publication Date05/05/2020Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:3857WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Information about the Feature Class and Domain Name descriptions for the NSW Administrative Boundaries Theme can be found in the NSW Cadastral Data

State Electoral District dataset represents current NSW or NSW Federal electoral boundaries in conjunction with the Electoral Commission, containing all of the cadastral line data or topographic data features which form, by definition, the boundaries between adjoining electorates. It is a polygon feature class within the NSW Digital Cadastral Database (DCDB).

Access API NSW Administrative Boundaries Theme Please Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new 'multiCRS' functionality.Metadata Portal Metadata InformationContent TitleNSW Administrative Boundaries ThemeContent TypeOtherDescriptionThe Administrative Boundaries theme from NSW Foundation Spatial Data Framework (FSDF) is a collection of legislative, regulatory, political, maritime and general administrative boundaries sourced from local and state boundary datasets. They include:Parish CountySuburbLocal Government AreaState Electoral DistrictFederal Electoral DivisionMines SubsidenceDistrict NSW Parks and Wildlife Service ReserveState Forest Domestic Water Front PrecinctThe Administrative Boundaries theme is used to show administrative areas that represent:Voting DistrictsRedistributionsZoning Socio-Economic analysisRegional PlanningService DistributionLocal and State Government BoundariesIn addition, Administrative Boundaries can also be used for analysis and to look at trends over time. Administrative boundary data in combination with geo-coded address data, demographic information and agency specific business information underpins the ability to perform high quality spatial analysis.The use of this data in combination with other data includes:Evidence-based development and assessment of government policyProviding the ability to undertake spatial accountingRegional analysis for government, health, education, business and a range of other purposesSupport for emergency managementMarket catchment analysis, micromarketing, customer analysis and market segmentationEmergency management. Update frequencies vary for each dataset. Individual current status can be found under each spatial data profile. Initial Publication Date31/07/2019Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.au.Data Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:3857WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Information about the Feature Class and Domain Name descriptions for the NSW Administrative Boundaries Theme can be found in the NSW Cadastral Data Dictionary.Some of

Access API NSW Administrative Boundaries Theme Please Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new 'multiCRS' functionality.Metadata Portal Metadata InformationContent TitleNSW Administrative Boundaries ThemeContent TypeOtherDescriptionThe Administrative Boundaries theme from NSW Foundation Spatial Data Framework (FSDF) is a collection of legislative, regulatory, political, maritime and general administrative boundaries sourced from local and state boundary datasets. They include:Parish CountySuburbLocal Government AreaState Electoral DistrictFederal Electoral DivisionMines SubsidenceDistrict NSW Parks and Wildlife Service ReserveState Forest Domestic Water Front PrecinctThe Administrative Boundaries theme is used to show administrative areas that represent:Voting DistrictsRedistributionsZoning Socio-Economic analysisRegional PlanningService DistributionLocal and State Government BoundariesIn addition, Administrative Boundaries can also be used for analysis and to look at trends over time. Administrative boundary data in combination with geo-coded address data, demographic information and agency specific business information underpins the ability to perform high quality spatial analysis.The use of this data in combination with other data includes:Evidence-based development and assessment of government policyProviding the ability to undertake spatial accountingRegional analysis for government, health, education, business and a range of other purposesSupport for emergency managementMarket catchment analysis, micromarketing, customer analysis and market segmentationEmergency management. Update frequencies vary for each dataset. Individual current status can be found under each spatial data profile. Initial Publication Date31/07/2019Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.au.Data Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:3857WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Information about the Feature Class and Domain Name descriptions for the NSW Administrative Boundaries Theme can be found in the NSW Cadastral Data Dictionary.Some of

Access API Administrative Boundaries Theme - Parish Please Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new multiCRS functionality. Metadata Portal Metadata InformationContent TitleNSW Administrative Boundaries Theme - Mines Subsidence DistrictContent TypeHosted Feature LayerDescriptionNSW Parish is a dataset within the Administrative Boundaries Theme of the FSDF. It contains 7,459 administrative areas (Parishes) formed by the division of 141 counties. Counties and parishes are administrative divisions of the state and are not separately disposable land parcels. County and Parish are historical layers and the information contained on these layers was gathered from Parish and County maps which are now held at State Records (digital versions can be accessed through the Historical Lands Records Viewer). However, they can be updated (if necessary) after a title inspection.Parishes are divided into separately land parcels called “portions”, these being the common basic units of land disposed of by the Crown (sold), held in occupation (leased) or reserved for public purposes. Other basic units are section and allotments in Towns and Villages. The dataset contains county and parish names. Any changes that occur to the dataset should have a reference in the authority of reference feature class in the lot and property data sets.Features are positioned in topological alignment within the extents of the land and property polygons for each county and are held in alignment, including changes resulting cadastral maintenance and upgrades. NSW Parish is a subset of NSW County.This dataset contains an historical land administration boundary. The original Parish definition is static, however, data will move with changes to the Land Parcel and Property theme.Initial Publication Date05/02/2020Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:4326WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Information about the Feature Class and Domain Name descriptions for the NSW Administrative Boundaries Theme can be found in the NSW

Access API Administrative Boundaries Theme - Parish Please Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new multiCRS functionality. Metadata Portal Metadata InformationContent TitleNSW Administrative Boundaries Theme - Mines Subsidence DistrictContent TypeHosted Feature LayerDescriptionNSW Parish is a dataset within the Administrative Boundaries Theme of the FSDF. It contains 7,459 administrative areas (Parishes) formed by the division of 141 counties. Counties and parishes are administrative divisions of the state and are not separately disposable land parcels. County and Parish are historical layers and the information contained on these layers was gathered from Parish and County maps which are now held at State Records (digital versions can be accessed through the Historical Lands Records Viewer). However, they can be updated (if necessary) after a title inspection.Parishes are divided into separately land parcels called “portions”, these being the common basic units of land disposed of by the Crown (sold), held in occupation (leased) or reserved for public purposes. Other basic units are section and allotments in Towns and Villages. The dataset contains county and parish names. Any changes that occur to the dataset should have a reference in the authority of reference feature class in the lot and property data sets.Features are positioned in topological alignment within the extents of the land and property polygons for each county and are held in alignment, including changes resulting cadastral maintenance and upgrades. NSW Parish is a subset of NSW County.This dataset contains an historical land administration boundary. The original Parish definition is static, however, data will move with changes to the Land Parcel and Property theme.Initial Publication Date05/02/2020Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:4326WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Information about the Feature Class and Domain Name descriptions for the NSW Administrative Boundaries Theme can be found in the NSW

Export DataAccess APINSW Administrative Boundaries Theme multiCRSMultiCRS service - supporting requests in multiple Coordinate Reference Systems -Information SheetA new series of ‘multiCRS’ web services have been published to support GDA2020. These new ‘multiCRS’ services: · Have a spatial reference of GDA2020 · Support alignment with GDA2020, GDA94 or [WGS 84-aligned-to-GDA2020] GIS environments, using built-in server-side transformations: o GDA94 < NTv2-CPD > GDA2020 o GDA94 < NTv2-CPD > WGS 84 aligned to GDA2020 o GDA2020 < NULL > WGS 84 aligned to GDA2020 Note: ESRI software will automatically align by transforming from the sourceSpatialReference (GDA94). Other software may need to set client-side transformations from the SpatialReference (GDA2020). Note: Client-side transformation(s) can be used to over-ride these default transformations. The original [WGS 84-aligned-to-GDA2020] is still available, without the ‘multiCRS’ suffix. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt this new 'multiCRS' functionality. Metadata Portal Metadata Information Content TitleNSW Administrative Boundaries Theme multiCRSContent TypeHosted Feature LayerDescriptionThe Administrative Boundaries theme from NSW Foundation Spatial Data Framework (FSDF) is a collection of legislative, regulatory, political, maritime and general administrative boundaries sourced from local and state boundary datasets. These include: Parish County Suburb Local Government Area State Electoral District Federal Electoral Division Mines Subsidence District NSW Parks and Wildlife Service Reserve State Forest Domestic Water Front PrecinctThe Administrative Boundaries theme is used to show administrative areas that represent:Voting Districts Redistributions Zoning Socio-Economic analysis Regional Planning Service Distribution Local and State Government Boundaries In addition, Administrative Boundaries can also be used for analysis and to look at trends over time. Administrative boundary data in combination with geo-coded address data, demographic information and agency specific business information underpins the ability to perform high quality spatial analysis. The use of this data in combination with other data includes: Evidence-based development and assessment of government policy Providing the ability to undertake spatial accounting Regional analysis for government, health, education, business and a range of other purposes Support for emergency management Market catchment analysis, micromarketing, customer analysis and market segmentation Emergency management. Update frequencies vary for each dataset. Individual current status can be found under each spatial data profile.Initial Publication Date05/02/2020Data Currency01/01/3000Data Update FrequencyDailyContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoingSpatial Reference System (dataset)GDA94Spatial Reference System (web service)OtherWGS84 Equivalent ToGDA2020Spatial ExtentFull

The NSW Administrative Boundaries Web Service is a dynamic map of administrative and property boundaries. Administrative Areas Boundaries depict a polygon feature class within the NSW Digital Cadastral Database maintained by Spatial Services (DCS). The administrative boundaries provided through this web service includes: Counties, Suburbs, Parishes, Local Government Areas, State Forests, National Parks, State Electoral Districts. NOTE: Please contact the Customer HUB https://customerhub.spatial.nsw.gov.au/ for advice on datasets access.