Access API Export Data Indigenous Areas are medium sized geographic areas built from whole Indigenous Locations. They are designed for the release and analysis of more detailed statistics for Aboriginal and Torres Strait Islander people. Changes to Indigenous Areas are determined through consultation with the Centre for Aboriginal and Torres Strait Islander Statistics based on statistical and community requirements. Whole Indigenous Areas aggregate to form Indigenous Regions. Further information about these regions can be found in the following publication: Australian Statistical Geography Standard (ASGS) Edition 3

Access API Export Data Indigenous Regions (IREGs) are large geographic areas built from whole Indigenous Areas. Changes to Indigenous Regions are determined through consultation with the Centre for Aboriginal and Torres Strait Islander Statistics based on statistical and community requirements. Further information about these regions can be found in the following publication: Australian Statistical Geography Standard (ASGS) Edition 3 https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026

Access API Export Data Destination Zones are co-designed with state and territory transport authorities. DZNs are designed from either whole or aggregations of Mesh Blocks (MB) and they align to Statistical Area Level 2 boundaries. They have no relationship to Statistical Area Level 1 boundaries. Destination Zones were incorporated as part of the ASGS for the first time in 2021. Further information about these regions can be found in the following publication: Australian Statistical Geography Standard (ASGS) Edition 3 https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026

Australian Bureau of Statistics (ABS) Statistical Geographical Standard Boundaries divides an area of interest throughout the state of NSW on which statistics are collected for purposes under the Census and Statistics Act 1905 (Cth). The ABS Structures are a hierarchy of regions developed for the release of ABS statistical information. The main components are as follows: • Statistical Areas Level 4 • Statistical Areas Level 3 • Statistical Areas Level 2 • Statistical Areas Level 1 • Regional Boundaries.

TPA has a range of location information products which include digitised boundaries. Travel Zones (TZs) are the geographic units of TPA’s data collection, transport modelling and analysis. They are designed to align as much as possible with current Australian Bureau of Statistics (ABS) geographic classification for that year, to allow for comparison of different data sources at standard geographies. Geographic coverage – Sydney Greater Metropolitan Area (GMA) In order to provide for a similar level of trip generation across zones, TZs are designed to be small in areas with high land use densities and larger in areas of lower density. The key land uses of interest in defining TZs are employment, housing and transport infrastructure. As urban areas change over time, TPA creates a new zoning system in line with each 5-yearly population Census. Digitised boundaries for these zoning systems and equivalences between them, are available to users to undertake spatial analysis. 1991 – 2006 – Australian Standard Geographical Classification (ASGC), with Statistical Local Areas (SLA), Census Collection District (CCD) and Mesh Blocks (MB). Prior to 2006, TZs aligned to Statistical Local Areas (SLA). GMA may change slightly at the boundary to align with ABS geographic classifications. This will not usually impact on the comparison of data over time.

This dataset represents the Bureau of Reclamation's Region Boundaries prior to the establishment of Department of Interior Unified Region Boundaries in 2019. NOTE: These boundaries are for general reference only and are no longer represent official administrative boundaries. The Regions included in this representation are the Pacific Northwest, Upper Colorado, Lower Colorado, Great Plains and Mid-Pacific Regions. These boundaries are superseded by Department of Interior Unified Region Boundaries.

Export Data Access API NSW Administrative Boundaries Theme - ABS Statistical Areas Level 4 Please Note WGS 84 = GDA94 service This dataset has a spatial reference of [WGS 84 = GDA94] and can NOT be easily consumed into GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS84 = GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that these original services will adopt the new multiCRS functionality. Metadata Portal Metadata Information Content TitleNSW Administrative Boundaries Theme - ABS Statistical Areas Level 4Content TypeHosted Feature LayerDescriptionAustralian Bureau of Statistics (ABS) Statistical Geographical Standard Boundaries SA 4 divides an area of interest throughout the state of NSW on which statistics are collected for purposes under the Census and Statistics Act 1905 (Cth).The Australian Statistical Geography Standard (ASGS) brings together in one framework all of the regions which the Australian Bureau of Statistics (ABS) and many other organisations use to collect, release and analyse geographically classified statistics. The ASGS ensures that these statistics are comparable and geospatially integrated and provides users with a coherent set of standard regions so that they can access, visualise, analyse and understand statistics.The 2016 ASGS will be used for the 2016 Census of Population and Housing and progressively introduced into other ABS data collections. The ABS encourages the use of the ASGS by other organisations to improve the comparability and usefulness of statistics generally, and in analysis and visualisation of statistical and other data.The ABS Structures are a hierarchy of regions developed for the release of ABS statistical information. The main components are as follows:Statistical Areas Level 1Statistical Areas Level 2Statistical Areas Level 3Statistical Areas Level 4Regional Boundaries (Local Government Area, Suburb)The Australian Bureau of Statistics Geographical Standard Boundaries - Statistical Areas are used to define geographical areas to support statistical and socio-economic analysis at a state and regional scale. They are useful for analytical purposes within statistical boundaries through the aggregation of a wide swath of data and information.The ABS maintains the Australian Statistical Geography Standard (ASGS) and the Australian Standard Geographical Classification (ASGC) for pre-2011 census information.In addition to the NSW Administrative Boundaries Theme Australian Bureau of Statistics also provides this data via a web service direct from ABS.Further standards, specifications and classifications can be found at:Australian Bureau of Statistics StandardsAustralian Bureau of Statistics ClassificationsThe regions defined in the ABS Structures will not change until the next Census in 2021. The Non-ABS Structures are updated only when the ABS considers that there are major changes to the administrative boundaries they represent.Initial Publication Date05/02/2020Data Currency01/01/3000Data Update FrequencyOtherContent SourceAPIFile TypeMap Feature ServiceAttribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 =

The National Regional Profile (NRP) presents data for 2010-14 for Local Government Areas, Australian Statistical Geography Standard regions (Statistical Areas 2, 3 and 4, and Greater Capital City Statistical Areas), States/Territories and Australia. The NRP is designed for users interested in the socio-economic and environmental characteristics of regions - and in comparisons with similar geographies across Australia. Data are arranged under the broad themes/topics of Economy, Industry, People, and Energy and Environment.

Export Data Access API NSW Administrative Boundaries Theme – Australian Bureau of Statistics Regional Boundaries – Local Government Area Please Note WGS 84 service aligned to GDA94 This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments. In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new multiCRS functionality Metadata Portal Metadata Information Content TitleNSW Administrative Boundaries Theme - ABS Regional Boundaries Local Government AreaContent TypeHosted Feature LayerDescriptionAustralian Bureau of Statistics (ABS) Statistical Geographical Standard Boundaries Suburb divides an area of interest throughout the state of NSW on which statistics are collected for purposes under the Census and Statistics Act 1905 (Cth).The Australian Statistical Geography Standard (ASGS) brings together in one framework all of the regions which the Australian Bureau of Statistics (ABS) and many other organisations use to collect, release and analyse geographically classified statistics. The ASGS ensures that these statistics are comparable and geospatially integrated and provides users with a coherent set of standard regions so that they can access, visualise, analyse and understand statistics.The 2016 ASGS will be used for the 2016 Census of Population and Housing and progressively introduced into other ABS data collections. The ABS encourages the use of the ASGS by other organisations to improve the comparability and usefulness of statistics generally, and in analysis and visualisation of statistical and other data.The ABS Structures are a hierarchy of regions developed for the release of ABS statistical information. The main components are as follows:Statistical Areas Level 1Statistical Areas Level 2Statistical Areas Level 3Statistical Areas Level 4Regional Boundaries (Local Government Area, Suburb)The Australian Bureau of Statistics Geographical Standard Boundaries - Statistical Areas are used to define geographical areas to support statistical and socio-economic analysis at a state and regional scale. They are useful for analytical purposes within statistical boundaries through the aggregation of a wide swath of data and information.The ABS maintains the Australian Statistical Geography Standard (ASGS) and the Australian Standard Geographical Classification (ASGC) for pre-2011 census information.In addition to the NSW Administrative Boundaries Theme Australian Bureau of Statistics also provides this data via a web service direct from ABS.Further standards, specifications and classifications can be found at:Australian Bureau of Statistics StandardsAustralian Bureau of Statistics ClassificationsThe regions defined in the ABS Structures will not change until the next Census in 2021. The Non-ABS Structures are updated only when the ABS considers that there are major changes to the administrative boundaries they represent.Initial Publication Date05/02/2020Data Currency01/01/3000Data Update FrequencyOtherContent SourceAPIFile TypeMap Feature ServiceAttribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.au.Data Theme, Classification or Relationship to other DatasetsNSW Administrative Boundaries Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale