데이터셋 상세
호주
Willoughby City Council - Scotts Creek Flood Study
This report presents the results of a detailed technical investigation of flooding in the Scotts Creek catchment and has been sponsored by Willoughby City Council (WCC) and Department of Environment and Climate Change. Figure 1.1 shows the location of the catchment which drains the suburbs of Chatswood and Castle Cove before discharging to Sugarloaf Bay in Middle Harbour. The investigation defined flooding as far downstream as the Eastern Valley Way. Mathematical models of the catchment and the floodplain were developed using detailed field surveys and interpreted to present a comprehensive picture of flooding under present day conditions. The study objective was to define flood behaviour in the stream in terms of flows, levels and flooding behaviour for floods ranging between 5 and 200 years average recurrence interval (ARI), as well as the PMF. The investigation involved hydrologic modelling to assess flows in Scotts Creek between its headwaters in the Chatswood CBD area and the Eastern Valley Way. These flows were applied to a hydraulic model of the main arm of Scotts Creek to assess peak water levels and flow patterns. The hydraulic modelling extended from Havilah Street on the eastern side of Chatswood Chase to the Eastern Valley Way. The trunk drainage system of Scotts Creek to Penshurst Street is denoted Stormwater Catchment 26 and is owned by Sydney Water. It comprises sections of piped drains, as well as covered and open concrete lined stormwater channels. The piped drainage system extends through the Chatswood CBD to the eastern side of Chatswood Chase in Havilah Street (Figure 1.2). Between Havilah Street and Baldry Street, flows on the main arm of Scotts Creek are conveyed in Sydney Water’s covered stormwater channel which follows the route of the original creek and extends as far as the Temple Emanuel School near Chatswood Avenue. An open concrete lined stormwater channel also owned by Sydney Water continues downstream and conveys flows to Penshurst Street. Willoughby City Council’s channel continues downstream of Penshurst Street to the Eastern Valley Way, and comprises sections of rock lined and “pillow concrete” lined trapezoidal channel. The total catchment area at the Eastern Valley Way is 3 km2. The headwaters of the catchment are drained by separate piped trunk drainage systems which drain the northern and southern portions of the catchment. Overland flows from the southern trunk drain are diverted into Chatswood Oval, which functions as an off-line detention basin during periods of heavy rainfall. Peak flows from the northern portion of the catchment will be influenced by a flood storage/ water harvesting basin which will be excavated adjacent to Ferguson Lane as part of the Chatswood Civic Place project, due for construction in 2009 and situated just upstream of the intersection of that street with Archer Street. The storage characteristics of both Chatswood Oval and the flood storage basin in Ferguson Lane have been included in the hydrologic model of Scotts Creek developed in this study for the estimation of design flows. The trunk drainage systems meet at the intersection of Archer Street and Victoria Avenue and continue eastwards as separate piped systems along both the northern and southern sides of Victoria Avenue to Havilah Street. The drainage system is of limited hydraulic capacity and has been surcharged, most recently in April 1998, when flooding was experienced in several commercial properties bordering Victoria Avenue. It was reported that overland flows heading eastwards along Victoria Avenue in the April 1998 flood were captured by the prevailing natural surface grade and flowed into the basement car park of Chatswood Chase via the driveway entrance near the intersection with Havilah Street. Overland flows heading eastwards down Mills Lane also entered Chatswood Chase. The car park then acted as a detention basin and had a local influence on downstream flows in the creek. To include the
데이터 정보
연관 데이터
Willoughby City Council - Sailors Bay Creek Flood Study - Volume 1 - Report
공공데이터포털
This report presents the results of an investigation of flooding in the Sailors Bay Creek catchment and has been jointly sponsored by Willoughby City Council (WCC) and the NSW Government, via the Office of Environment and Heritage (OEH). Figure 1.1 shows the location of the catchment, which drains residential and commercial areas in the suburbs of Willoughby, Northbridge and Castlecrag before discharging to Sailors Bay in Middle Harbour. The study objective was to define flood behaviour in terms of flows, water levels and flooding patterns for floods ranging between 5 and 100 year ARI, as well as for the PMF. The investigation involved rainfall-runoff hydrologic modelling of the catchment and drainage system to assess flows in the Sailors Bay Creek drainage system, and application of these flows to a hydraulic model of the main arm of Sailors Bay Creek and its overland flow paths to assess peak water levels and flow patterns. The model results were interpreted to present a detailed picture of flooding under present day conditions. The scope of the study included investigation of both main stream flood behaviour along the main arm of Sailors Bay Creek as well as overland flooding throughout the study area which occurs either as a result of surcharges of the piped drainage system or upstream of the commencement of the formal drainage system. Flooding in the lower reaches of the study area as a result of storm-driven elevated harbour water levels was also investigated. The study forms the first step in the floodplain risk management process for the Sailors Bay Creek catchment (refer process diagram presented in the Foreword) , and is a precursor of the future FRMS sponsored by WCC which will consider the impacts of flooding on existing and future urban development, as well as potential flood mitigation and management measures. Note that the results of the present study supersede those presented in the Overland Flooding Investigation undertaken for the whole of the Willoughby City Local Government Area (LGA) (L&A, 2009). The work undertaken in that study is summarised in Chapter 2.
Willoughby City Council - Swaines Creek Flood Study report
공공데이터포털
Chapter 2 contains background information including a brief description of the study catchment and its drainage system, details of previous flooding investigations, a summary of community consultation undertaken as part of this present study (refer Appendix A for details), and a brief history of flooding within the catchment. Chapter 3 deals with the hydrology of the Lane Cove River and Swaines Creek catchments, and describes the development of the RORB and DRAINS hydrologic models which were used to generate discharge hydrographs for input to the hydraulic model. Chapter 4 deals with the development of the TUFLOW hydraulic model which was used to analyse flood behaviour in the study area. Chapter 5 deals with the derivation of design discharge hydrographs, which involved the determination of design storm rainfall depths over the catchments for a range of storm durations and conversion of the rainfalls to discharge hydrographs. Chapter 6 details the results of the hydraulic modelling of the design floods. Results are presented as water surface profiles and plans showing indicative extents of inundation for a range of design flood events up to and including the PMF. A provisional assessment of flood hazard and hydraulic categorisation is also presented. (The assessment of flood hazard according to velocity and depth of floodwaters is necessarily “provisional”, pending a more detailed assessment which includes other flood related criteria, to be undertaken during the future FRMS.) The results of various sensitivity studies undertaken using the TUFLOW model are also presented, including the effects of changes in hydraulic roughness, partial blockage of the piped stormwater system, and potential increases in rainfall intensities and sea levels due to future climate change. This chapter also deals with the selection of Interim FPL’s for the study area. Chapter 7 contains a list of references. Chapter 8 contains a list of flood-related terminology that is relevant to the scope of the study. Appendix A provides details of the collection of historic flood data and describes the testing of the hydrologic and hydraulic models. Figures referred to in both the main report and the appendices are bound in a separate volume of the report (refer Volume 2).
Wollongong City Council - Allans Creek Flood Study - Report
공공데이터포털
Complete report
Penrith City Council - College, Orth and Werrington Creeks Catchment Overland Flow Flood Study - Report
공공데이터포털
Report and Appendices
Lake Macquarie City Council - Upper Cockle Creek Flood Study - Reports
공공데이터포털
Data contains main report, figures and appendices
Georges River Council - Overland Flow Flood Study - Report
공공데이터포털
Complete report
Wollongong City Council - Review of Hewitts Creek Flood Study - Final Report
공공데이터포털
Report only; no other data.
Council Of The City Of Sydney - Alexandra Canal Catchment Flood Study - Report
공공데이터포털
Final report
Penrith City Council - College, Orth and Werrington Creeks Catchment Overland Flow Flood Study - Figures
공공데이터포털
PDF
Port Macquarie-Hastings Council - Wrights Creek Flood Study Update (2019)
공공데이터포털
This study updates the previous Wrights Creek Flood Study (Patterson Britton & Partners, 2007) and provides Council with a suitable platform for undertaking the next steps in the Floodplain Risk Management Process. The XP-RAFTS hydrologic model developed in the 2007 Flood Study has been adopted for this study. A TUFLOW hydraulic model of the catchment has been established using up to date survey of the ground levels and culvert and bridge structures. The TUFLOW hydraulic model has been used to reproduce the historical flood behaviour from events in 1995 and 2002 and to define flood behaviour for a range of design events. Actions undertaken as part of this flood study include: • collection of additional survey, • development of a TUFLOW hydraulic model, • definition of the design flood behaviour, • assessment of provisional hydraulic hazard, • assessment of hydraulic categorization, • assessment of the model sensitivity to parameter changes, • assessment of climate change impacts on model results, • assessment of sensitivity of model results to the new ARR 2016 design inputs, • community consultation.