The 2017 Landuse captures how the landscape in NSW is being used for food production, forestry, nature conservation, infrastructure and urban development. It can be used to monitor changes in the landscape and identify impacts on biodiversity values and individual ecosystems. The NSW 2017 Landuse mapping is dated September 2017. This is version 1.5 of the dataset, published December 2023. Version 1.5 of the 2017 Landuse incorporates the following updates: Fine scale mapping of the Central Coast, Illawarra and Shoalhaven regions Mapping enhancements to regional centres to improve the mapping accuracy for these centres NSW road network based on road centreline data from Transport NSW, with standardised buffer applied to approximate the carriage width based on the road type Plantation type (native hardwood and softwood) information within State Forest Estates Horticulture data to tertiary or commodity level present in September 2017 from Australian Tree Crop Map Dashboard developed by University of New England - Applied Agricultural Remote Sensing Centre https://www.une.edu.au/research/research-centres-institutes/applied-agricultural-remote-sensing-centre/collaborative-r-and-d-opportunities/industry-applications-and-maps Fixes to identified errors since published version 1.2 Previous Versions *Version 1.4 internal update (not published) * Version 1.3 internal update (not published) * Version 1.2 published 24 June 2020 - Fine scale update to Greater Sydney Metropolitan Area * Version 1 published August 2019 The 2017 Landuse is based on Aerial imagery and Satellite imagery available for NSW. These include, but not limited to; digital aerial imagery (ADS) captured by NSW Department of Customer Service (DCS), high resolution urban (Conurbation) digital aerial imagery captured on behalf of DCS, SPOT 5, 6 & 7(Airbus), Planet™, Sentinel 2 (European Space Agency) and LANDSAT (NASA) Satellite Imagery. Mapping also includes commercially available imagery from Nearmap™ and Google Earth™, along with Google Street View™. Mapping takes into consideration ancillary datasets such as tenure such as National Parks and State forests, cadastre, roads parcels, land zoning, topographic information and Google Maps, in conjunction with visual interpretation and field validation of patterns and features on the ground. The 2017 Landuse was captured on screen using ARC GIS (Geographical Information Software) at a scale of 1:8,000 scale (or better) and features are mapped down to 2 hectares in size. Exceptions were made for targeted Landuse classes such as horticulture, intensive animal husbandry and urban environments, which were mapped at a finer scale. The 2017 Landuse has complete coverage of NSW. It also includes updates to the fine scale Horticulture mapping for the east coast of NSW - Newcastle to the Queensland boarder and Murray-Riverina Region. This horticultural mapping includes operations to the commodity level based on field work and high-resolution imagery interpretation. Landuse classes assigned are based on activities that have occurred in the last 5-10 years that may be part of a rotational practice. Time-series LANDSAT information has been used in conjunction with more recent Satellite Imagery to determine whether grasslands have been disturbed or subject to ongoing land management activities over the past 30 years. The 2017 Landuse was captured on screen using ARC GIS (Geographical Information Software) at a scale of 1:8,000 scale (or better) and features are mapped down to 2 hectares in size. Exceptions were made for targeted Landuse classes such as horticulture, intensive animal husbandry and urban environments (including Greater Sydney Metropolitan region), which were mapped at a finer scale. The reliability scale of the dataset is 1:10,000. Mapping has been subject to a peer review and quality assurance process. Land use information has been captured in accordance with standards set by the Australian Collaborative Land Use Mapping

The 2013 land use captures how the landscape in NSW is being used for food production, forestry, nature conservation, infrastructure and urban development. It can also be used to monitor changes in the landscape and identify resulting impacts on biodiversity values and individual ecosystems. The state wide land use data is a compilation of the best available land use information for NSW that was available in August 2017. Land use and tenure datasets from a variety of projects have been compiled, these include; Landuse mapping 2017 – 1:10,000 scale mapping using 2013 SPOT 5 satellite imagery and ADS digital aerial imagery. Covering rural zoned, agricultural areas. These areas are applicable to Local Land Services Act 2016. NSW Horticulture mapping project – Fine scale mapping (1:5,000) mapping of horticulture production to the commodity level (where applicable), on the mid-north and north coast of NSW. This was in response to the outbreak of Panama disease, Tropical Race 4, found in a banana plantation in Northern Queensland. It is part of a collaborative mapping project to improve Biosecurity information between state jurisdictions and the commonwealth. It also covers plantation forestry for the project area. Hunter 2013 mapping – 1:10,000 scale mapping covering most of the Hunter catchment based on 2013 SPOT5 imagery. It was part of a pilot land use update trial for intended use in Department of Planning Regional Growth Plans. This is an update of the 2005 Land use Hunter catchment and 2008 Upper Hunter catchment land use mapping projects, also available on SDE and P drive. National Parks and State Forest Tenure mapping 2017 Sydney Map sheet 2012 – Detailed urban mapping (1:10,000 scale) trial using high resolution Digital aerial imagery Existing Land use information (circa 2003) has been used for non-rural zoned areas and not covered by the other projects mentioned above. This component of the 2013 land use has a reliability scale of 1:25,000. The areas where the circa 2003 land use product used include; urban, industrial, commercial and environmental local government LEP (Local Environment Planning) zones. It also includes areas of metropolitan Sydney that are excluded from the LLS Act 2016. Land use information has been captured in accordance with standards set by the Australian Collaborative Land Use Mapping Program (ACLUMP) and using the Australian Land Use and Management ALUM Classification. The ALUM classification is based upon the modified Baxter & Russell classification and presented according to the specifications contained in http://www.agriculture.gov.au/abares/aclump/land-use/alum-classification. The 2013 land use, that was mapped for the purposes of the Local Land Services Act, was commenced in July 2016 and completed by August 2017. It covers all rural zoned (agricultural) areas, and was based on most appropriate SPOT5 imagery to represent land use at June 2013. It includes values in the attribute fields of source, source date, source scale, reliability and land use mapping (currency) date. The reliability scale of areas mapped form 2012 onward is 1:10,000. For areas where circa 2003 land use information has been used the reliability scale is 1:25,000. This is identified in the source scale attribute for each feature in the dataset. The date of the data set is set as the land use occurring at the time the imagery (satellite or aerial) was acquired, which can range from 2003 to 2013. This dataset was updated in August 2017 to include values in the attribute fields of Source, Source Date, Source Scale, Reliability and LU Mapping (Currency) Date. A national catchment scale land use product is also available as a 50m raster - Australian Bureau of Agricultural and Resource Economics and Sciences (ABARES) http://www.agriculture.gov.au/abares/aclump/land-use/data-download.

Dataset of Land Use between June 2000 and June 2007 for the whole of New South Wales. Land use polygons are classified to both NSW classification (LUMAP) and National standards (ALUM, Australian Land Use and Management). The ALUM classification is based upon the modified Baxter and Russell classification and presented according to the specifications contained in Baxter and Russell Classification. The date of the data set is set as the land use occurring at the time the satellite imagery was acquired, which can range from 1999 to 2006. The V2 dataset was updated in May 2011 to include values in the attribute fields of Source, Source Date, Source Scale, Reliability and LU Mapping Date and is ALUM Version 7 compatible.

This dataset depicts land use across South Australia according to the Australian Land Use and Management (ALUM) Classification Version 8 aggregated from surveys in 2008, 2014 and 2016. It forms part of the Australian Collaborative Land Use and Management Program (ACLUMP) land use mapping. The dataset is a combination of land use data mapped over recent years. The data were derived from an initial desktop interpretation of aerial imagery followed by an on-ground field survey. This dataset will be updated when any new land use mapping is undertaken in a part of SA.