To construct a high-level evaluation scenario for the Water Sharing Plan (the Plan) for the Gwydir Regulated River Water Source all account-based Plan Environmental Water (PEW) rules have been removed from the Current Conditions model. Specifically, it included the following PEW rules: Environmental Water Allowance (EWA) stipulated in Cause 64 of the Plan Protection of the minimum (3T) inflow rule stipulated in Clause 61 of the Plan 50:50 sharing of Supplementary water events stipulated in Clause 48 of the Plan The flow at the following key sites within the river system has been considered in the evaluation analysis: 1) 416052_GilGil@Galloway 2) 418001_Gwydir@Pallamallawa 3) 418002_ Mehi@Moree 4) 418004_Gwydir@Yarraman 5) 418013_Gwydir@Gravesend 6) 418037_Mehi@DSCombadello 7) 418048_Moomin@Combadello 8) 418049_Mallowa@Regulator 9) 418052_Carole@Garah 10) 418055_Mehi@Collarenebri 11) 418063_Gwydir@DSTyreel 12) 418066_Gwydir@Millewa 13) 418074_Gingham@Teralba 14) 418076_Gingham@Tillaloo 15) 418078_Gwydir@Allambie 16) 418079_Gingham@GinghamBridge Note: If you would like to ask a question, make any suggestions, or tell us how you are using this dataset, please visit the NSW Water Hub which has an online forum you can join.

Water sharing plans (WSP) are established under the Water Management Act 2000 (the Act) and are prepared for all water sources in NSW. These plans are also a component of Water Resources Plans prepared as a requirement of the Basin Plan 2012, covering water sources in the Murray–Darling Basin. WSP’s are reviewed and replaced periodically (usually every ten years) to ensure the long-term health of ecosystems and communities in specific WSP areas. The review of a WSP includes a formal evaluation to assess appropriateness, efficiency of implementation, effectiveness in meeting plan objectives, and alignment with the Act's requirements. The evaluation follows a step-by-step process which includes a model scenario to represent the effects of Planned Environmental Water (PEW) rules in the WSP. This high-level (“No PEW”) scenario enables a comparison of modelled flows at key locations within the river system between scenarios WITH and WITHOUT plan environmental rules to inform an assessment of the effectiveness of the PEW rules in the WSP. Note: If you would like to ask a question, make any suggestions, or tell us how you are using this dataset, please visit the NSW Water Hub which has an online forum you can join.

Export Data Water sharing plans (WSP) are established under the Water Management Act 2000 (the Act) and are prepared for all water sources in NSW. These plans are also a component of Water Resources Plans prepared as a requirement of the Basin Plan 2012, covering water sources in the Murray-Darling Basin.WSP's are reviewed and replaced periodically (usually every ten years) to ensure the long-term health of ecosystems and communities in specific WSP areas. The review of a WSP includes a formal evaluation to assess appropriateness, efficiency of implementation, effectiveness in meeting plan objectives, and alignment with the Act's requirements.The evaluation follows a step-by-step process which includes a model scenario to represent the effects of Planned Environmental Water (PEW) rules in the WSP.This high-level ("No PEW") scenario enables a comparison of modelled flows at key locations within the river system between scenarios WITH and WITHOUT plan environmental rules to inform an assessment of the effectiveness of the PEW rules in the WSP.For information about this feature class please see WATER MODELLING-ModelledData-NoPEW page in SEED website. Previous SEED service moved from 10.7 to 11. 1 Portal. Waiting for Metadata from DPIE. Metadata Portal Metadata Information Content TitleWater Modelling No Plan Environmental WaterContent TypeOtherDescriptionData was updated by FME at 10:23 on 11/07/2024Initial Publication Date28/08/2024Data Currency28/08/2024Data Update Frequency APIContent Source APIFile TypeImagery LayerAttributionData Theme, Classification or Relationship to other DatasetsAccuracySpatial Reference System (dataset)GDA94Spatial Reference System (web service)OtherWGS84 Equivalent ToGDA94Spatial ExtentContent LineageData ClassificationUnclassifiedData Access PolicyOpenData QualityTerms and ConditionsCreative CommonStandard and SpecificationData CustodianNSW Department of Climate Change, Energy, Environment and WaterPoint of ContactNSW Department of Climate Change, Energy, Environment and WaterData AggregatorData DistributorAdditional Supporting InformationTRIM Number

Export Data Previous SEED service moved from 10.7 to 11. 1 Portal. Waiting for Metadata from DPIE. Access API Metadata Portal Metadata Information Content TitleWater Modelling Modelled Data Annual Permitted TakeContent TypeOtherDescriptionWater Modelling Modelled Data Annual Permitted TakeInitial Publication Date28/08/2024Data Currency28/08/2024Data Update Frequency APIContent Source APIFile TypeImagery LayerAttributionData Theme, Classification or Relationship to other DatasetsAccuracySpatial Reference System (dataset)GDA94Spatial Reference System (web service)OtherWGS84 Equivalent ToGDA94Spatial ExtentContent LineageData ClassificationUnclassifiedData Access PolicyOpenData QualityTerms and ConditionsCreative CommonStandard and SpecificationData CustodianNSW Department of Climate Change, Energy, Environment and WaterPoint of ContactNSW Department of Climate Change, Energy, Environment and WaterData AggregatorData DistributorAdditional Supporting InformationTRIM Number

Export DataAccess API Metadata Portal Metadata Information Content TitleWater Modelling Modelled Data Without DevelopmentContent TypeOtherDescriptionData was updated by FME at 15:43 on 15/11/2023Initial Publication Date28/08/2024Data Currency28/08/2024Data Update FrequencyAPIContent SourceAPIFile TypeImagery LayerAttributionData Theme, Classification or Relationship to other DatasetsAccuracySpatial Reference System (dataset)GDA94Spatial Reference System (web service)OtherWGS84 Equivalent ToGDA94Spatial ExtentContent LineageData ClassificationUnclassifiedData Access PolicyOpenData QualityTerms and ConditionsCreative CommonStandard and SpecificationData CustodianNSW Department of Climate Change Energy, Environment and WaterPoint of ContactNSW Department of Climate Change Energy, Environment and WaterData AggregatorData DistributorAdditional Supporting InformationTRIM Number

Export DataWater sharing plans (WSP) are established under the Water Management Act 2000 (the Act) and are prepared for all water sources in NSW. These plans are also a component of Water Resources Plans prepared as a requirement of the Basin Plan 2012, covering water sources in the Murray-Darling Basin.WSP's are reviewed and replaced periodically (usually every ten years) to ensure the long-term health of ecosystems and communities in specific WSP areas. The review of a WSP includes a formal evaluation to assess appropriateness, efficiency of implementation, effectiveness in meeting plan objectives, and alignment with the Act's requirements.The evaluation follows a step-by-step process which includes a model scenario to represent the effects of Planned Environmental Water (PEW) rules in the WSP.This high-level ("No PEW") scenario enables a comparison of modelled flows at key locations within the river system between scenarios WITH and WITHOUT plan environmental rules to inform an assessment of the effectiveness of the PEW rules in the WSP.For information about this feature class please see WATER MODELLING-ModelledData-NoPEW page in SEED website.Previous SEED service moved from 10.7 to 11. 1 Portal. Waiting for Metadata from DPIE.Metadata Portal Metadata InformationContent TitleWater Modelling No Plan Environmental WaterContent TypeOtherDescriptionData was updated by FME at 10:23 on 11/07/2024Initial Publication Date28/08/2024Data Currency28/08/2024Data Update Frequency APIContent Source APIFile TypeImagery LayerAttributionData Theme, Classification or Relationship to other DatasetsAccuracySpatial Reference System (dataset)GDA94Spatial Reference System (web service)OtherWGS84 Equivalent ToGDA94Spatial ExtentContent LineageData ClassificationUnclassifiedData Access PolicyOpenData QualityTerms and ConditionsCreative CommonStandard and SpecificationData CustodianNSW Department of Climate Change, Energy, Environment and WaterPoint of ContactNSW Department of Climate Change, Energy, Environment and WaterData AggregatorData DistributorAdditional Supporting InformationTRIM Number

Water Models are comprehensive tools developed to simulate the behaviour of river systems under various conditions and scenarios. These models are essential for understanding and managing water resources, as they integrate a wide range of data inputs, including climate, hydrology, and human interventions. The following two categories of water models are available here: catchment models: catchment models, which focus on the natural hydrological processes within a catchment area; pre-development models: pre-development models, which simulate river systems before any water infrastructure or management practices were implemented.

Annual permitted take (APT) is a critical component of sustainable resource management, balancing the need for water resource utilisation with the preservation of ecosystems. It is a crucial mechanism for ensuring the long-term annual sustainable diversion limits (SDLs) set under the Murray-Darling Basin Plan are not exceeded, and that enough water is available for the environment. APT is the maximum amount of water permitted to be taken for consumptive purposes each year, and has been enforced since July 2019 A method for determining APT is part of each water resource plans (WRPs) developed by the Basin states under the Commonwealth Water Act 2007. When the method is applied over the Basin Plan reference period (1895–2009), the annual APT must be equal to or less than SDL. An APT model is a major component of the APT calculation method. It is used to calculate the APT that would be expected in a year, given that year’s water availability and climatic conditions. APT is calculated at the end of each year and compared to actual take in that year, with the difference added to a public register of take. SDL compliance is tracked using the cumulative difference (from water year 2019–20). APT models are configured using estimates of the river management and development (public and private infrastructure) conditions in a river system across the water resource plan period. These estimates include: • irrigated crop area and planting decisions • water entitlement holders’ distribution and use patterns • how storages are operated to supply water for consumption and the environment.

Annual permitted take (APT) is a critical component of sustainable resource management, balancing the need for water resource utilisation with the preservation of ecosystems. It is a crucial mechanism for ensuring the long-term annual sustainable diversion limits (SDLs) set under the Murray-Darling Basin Plan are not exceeded, and that enough water is available for the environment. APT is the maximum amount of water permitted to be taken for consumptive purposes each year, and has been enforced since July 2019 A method for determining APT is part of each water resource plans (WRPs) developed by the Basin states under the Commonwealth Water Act 2007. When the method is applied over the Basin Plan reference period (1895–2009), the annual APT must be equal to or less than SDL. An APT model is a major component of the APT calculation method. It is used to calculate the APT that would be expected in a year, given that year’s water availability and climatic conditions. APT is calculated at the end of each year and compared to actual take in that year, with the difference added to a public register of take. SDL compliance is tracked using the cumulative difference (from water year 2019–20). APT models are configured using estimates of the river management and development (public and private infrastructure) conditions in a river system across the water resource plan period. These estimates include: • irrigated crop area and planting decisions • water entitlement holders’ distribution and use patterns • how storages are operated to supply water for consumption and the environment.

Annual permitted take (APT) is a critical component of sustainable resource management, balancing the need for water resource utilisation with the preservation of ecosystems. It is a crucial mechanism for ensuring the long-term annual sustainable diversion limits (SDLs) set under the Murray-Darling Basin Plan are not exceeded, and that enough water is available for the environment. APT is the maximum amount of water permitted to be taken for consumptive purposes each year, and has been enforced since July 2019 A method for determining APT is part of each water resource plans (WRPs) developed by the Basin states under the Commonwealth Water Act 2007. When the method is applied over the Basin Plan reference period (1895–2009), the annual APT must be equal to or less than SDL. An APT model is a major component of the APT calculation method. It is used to calculate the APT that would be expected in a year, given that year’s water availability and climatic conditions. APT is calculated at the end of each year and compared to actual take in that year, with the difference added to a public register of take. SDL compliance is tracked using the cumulative difference (from water year 2019–20). APT models are configured using estimates of the river management and development (public and private infrastructure) conditions in a river system across the water resource plan period. These estimates include: • irrigated crop area and planting decisions • water entitlement holders’ distribution and use patterns • how storages are operated to supply water for consumption and the environment.