데이터셋 상세
호주
Open cut coal programme - Newcastle region, Point Morisset area Drilling results
A total of 25 rotary cored holes were drilled by the Bureau in Portion 49, Parish of Wallarah, County Northumberland, 2 miles south of Swansea. Approximately 1400 ft. of "test and define" drilling proved a possible 200,000 tons of coal suitable to be open cut under an average overburden of 6/1 ratio. The initial drilling programme showed a rolling seam. After surveying, further holes were drilled to locate the displacement which is 10 to 15 ft. in the S.W. corner of the area. No other obstacles are known which would hinder immediate working of the area. The lower split of the Wallarah Seam was tested in three holes but was found to be too thin to warrant further prospecting. The geology of the area is discussed in this report, and the results of the drilling programme are shown in the accompanying graphic and bore logs.
데이터 정보
연관 데이터
Drill hole locations within the Hanna Coal Beds 77, 78, 79 and 81 (ha*ptg)
공공데이터포털
These ArcView shapefiles contain representations of the Hanna 77, 78, 79 and 81 coal drill hole locations. These shapefiles were created specifically for the National Coal Resource Assessment of the Northern Rocky Mountain and Great Plains Fort Union Coal Resources Area, and can be viewed in relation to other relevant themes in this area.
Drill hole locations within the Hanna Coal Beds 77, 78, 79 and 81 (ha*ptg)
공공데이터포털
These ArcView shapefiles contain representations of the Hanna 77, 78, 79 and 81 coal drill hole locations. These shapefiles were created specifically for the National Coal Resource Assessment of the Northern Rocky Mountain and Great Plains Fort Union Coal Resources Area, and can be viewed in relation to other relevant themes in this area.
Drill hole locations within the Johnson-107 coal zone, Carbon County, Wyoming (scptg)
공공데이터포털
This ArcView shapefile contains a representation of the Drill Hole Locations within the Johnson-107 coal Zone. This theme was created specifically for the National Coal Resources Assessment in the Northern Rocky Mountains and Great Plains Region.
Drill hole locations within the Johnson-107 coal zone, Carbon County, Wyoming (scptg)
공공데이터포털
This ArcView shapefile contains a representation of the Drill Hole Locations within the Johnson-107 coal Zone. This theme was created specifically for the National Coal Resources Assessment in the Northern Rocky Mountains and Great Plains Region.
Drill hole locations within the Gillette coal field
공공데이터포털
This coverage contains a representation of the well locations in the Gillette Coalfield. This theme was created specifically for the National Coal Resources Assessment in the Northern Rocky Mountains and Great Plains Region.
Drill hole locations within the Gillette coal field
공공데이터포털
This coverage contains a representation of the well locations in the Gillette Coalfield. This theme was created specifically for the National Coal Resources Assessment in the Northern Rocky Mountains and Great Plains Region.
GSQOpenData@resources.qld.gov.au - GSQ RECORD 1981/16: IPSWICH COALFIELD, RHONDDA SOUTH, SUPPLEMENTARY DRILLING IN THE COCHRANE SEAM
공공데이터포털
URL: https://geoscience.data.qld.gov.au/dataset/cr041696 GSQ RECORD 1981/16: IPSWICH COALFIELD, RHONDDA SOUTH, SUPPLEMENTARY DRILLING IN THE COCHRANE SEAM
GSQOpenData@dnrme.qld.gov.au - RECORD OF RESULTS OF STAGE 1 DRILLING FOR COKING COAL BLACKWATER DISTRICT CENTRAL QUEENSLAND
공공데이터포털
URL: https://geoscience.data.qld.gov.au/dataset/cr000821 RECORD OF RESULTS OF STAGE 1 DRILLING FOR COKING COAL BLACKWATER DISTRICT CENTRAL QUEENSLAND