The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** **Notable changes in the August 2021 release:** * The Localities, Local Government Areas and Wards products have been redesigned to provide a new flattened data model, offering a simpler, easier-to-use structure. This will also: - change the composition of identifiers in these products. - provide state identifiers as an abbreviation (eg. NSW) rather than a code. - remove the static SA “Hundreds” data from Localities. * More information on the changes to Localities, Local Government Areas and Wards is available [here](https://geoscape.com.au/wp-content/uploads/2021/07/Geoscape-LGA-Localities-Wards-Design-Concepts.pdf). * The Australian Bureau of Statistics (ABS) Boundaries will be updated to include the 2021 Australian Statistical Geography Standard (ASGS). * Further information on the August changes to Geoscape datasets is available [here](https://geoscape.com.au/wp-content/uploads/2021/07/Product_Change_Notification_August_2021.pdf). Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **Notable changes in the Feb 2025 release** * There have been spatial changes (area) greater than 1 km2 to the localities ‘Birdwood’ and ‘Forreston’ in South Australia. Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Suburb/Locality Boundaries and their legal identifiers have been derived from the cadastre data from each state and territory jurisdiction and are available below. Suburb/Locality Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Local Government Areas and their legal identifiers have been derived from the cadastre data from each Australian state and territory jurisdiction and are available below. Local Government Areas are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).