This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2018_E02, titled 'MNF Trials and Calibrations' which departed Hobart on the 3rd of September 2018 and returned to Hobart on the 9th of September 2018. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column as part of a series of trials and calibration testing. Data are stored in Simrad *.all raw format at CSIRO. There are 27 files totalling 2.3 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2018_V04, 'Constraining external iron inputs and cycling in the southern extension of the East Australian Current' which departed Hobart on the 11 September 2018 and returned to Hobart on the 8 October 2018. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 was run for a short period on Station 3. It was not logged continuously due to the deep water depths and interference with the EK60 data. Data are stored in Simrad *.all raw format at CSIRO. There are 108 files totalling 10.4 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2017_V04, 'The whole enchilada: from production to predation in Tasman Sea ecosystems' which departed Brisbane on the 31-Aug-2017 and returned to Sydney on the 18 September 2017. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 logged sporadically for most of the voyage, but logged continuously near Montague Island. Data are stored in Simrad *.all raw format at CSIRO. There are 173 files totalling 15 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E03, Equipment Commissioning Sea Trials, which departed Brisbane on the 20th August 2017 and returned to Brisbane on the 24th of August 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information off the coast of Brisbane. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 17 files totalling 1.73 GB of raw data in this dataset. A patch test calibration was performed for the EM710 during this voyage to obtain pitch, roll and yaw calibration values. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V05, Long-term recovery of trawled marine communities 25 years after the world’s largest adaptive management experiment, which departed Broome on the 11 October 2017 and returned to Henderson on the 10 November 2017. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter around the Northwest Shelf. The EM710 provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 70 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 1436 files totalling 177GB of raw .all data and 483 water column .wcd files totalling 438 GB of data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections were applied to the processed data using GPS tides in CARIS 10.3. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2023_E01, 'Sea Trials and Calibrations' which departed Fremantle on the 06/01/2023 and returned to Fremantle on the 12/01/2023 (UTC). The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter around offshore Perth. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 194 files totalling 27.2 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2023_E01, 'Sea Trials and Calibrations' which departed Fremantle on the 07/01/2023 and returned to Fremantle on the 12/01/2023. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter at various times and depths throughout the voyage. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 69 files totalling 3.91 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V05, Long-term recovery of trawled marine communities 25 years after the world’s largest adaptive management experiment, which departed Broome on the 11 October 2017 and returned to Henderson on the 10 November 2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information for two periods between Broome and Henderson when water depths exceeded 500 meters. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 28 files totalling 1.1 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data using GPS tides in CARIS v10. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2019_V03, 2nd Indian Ocean Expedition Line which departed Fremantle on the 14/05/2019 and returned to Fremantle on the 14/06/2019. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information watercolumn backscatter in the area of the Indian Ocean, 110° E. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 825 files totalling 94.8 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_C02, ['Hogan Group Hydrographic Survey – Bass Strait'] which departed Hobart on the 4th May 2017 and came alongside Bell Bay following completion of the survey on the 14th May 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information [and watercolumn backscatter] around Bass Strait. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 465 files totalling 156 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data using AusTides 2017. Processed data has had outliers removed. Processed line data are not available in *.gsf and ascii format, but can be requested. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.