This record describes multibeam echosounder data collected on RV Investigator voyage IN2020_V06, titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 3, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter around Macquarie Island and during transit to the survey area. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 667 files totalling 32.4 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2019_V07, 'RAN Hydrographic and Maritime Heritage Surveys' which departed Hobart on the 11 April 2019 and returned to Hobart on the 23 April 2019. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information [and watercolumn backscatter] along the Tasmanian East Coast/Tasman Sea. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 102 files totalling 3.37 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2019_V07, 'RAN Hydrographic and Maritime Heritage Surveys' which departed Hobart on the 11 April 2019 and returned to Hobart on the 23 April 2019. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information [and watercolumn backscatter] along the Tasmanian East coast and in the central to eastern region of Bass Strait. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 337 files totalling 67 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to some of the processed data (i.e. AHO mapping area - files 0037 to 0112, and to other mapping sites - files 0188 to 0256). GPS tides (and reduction to AHD using AusGeoid 09) was applied to the BMR mapping areas (files 0257 to 0281, 0290 to 0293 & 0295 to 0300). Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_C02, Great Australian Bight Research Program: GAB deep-water pelagic and benthic ecosystem study which departed which departed Port Lincoln on the 30 November 2015 and returned to Fremantle on the 22 December 2015. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information around the Great Australian Bight. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 155 files totaling 11.4 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_T02, transit from Hobart to Sydney which departed Hobart on the 25 August 2016 and returned to Sydney on the 29 August 2016. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information between Hobart and Sydney with a hydrographic survey performed near Flinders Island. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 97 files totalling 11.9 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data except for the area of the hydrographic survey near Flinders Island. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset including further information on processing streams is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2024_V01, 'Multidisciplinary Investigations of the Southern Ocean' which departed Hobart on 05/01/2024 and returned to Fremantle on 05/03/2024. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter from Hobart, along the Antarctic ice edge to Fremantle. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 135 files totalling 126.9 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in .all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data has had outliers removed. Processed line data are available in .gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_V02, which departed Sydney on 15 May 2015 and arrived in Brisbane on 26 May 2015. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information off Fraser Island out to the abyssal plain, surveying for suitable mooring locations. Ping rate varied according to depth. Data are stored in *.all raw format at CSIRO Oceans and Atmosphere. There are 167 files totalling 4.66 GB of raw data in this dataset. Processed data are available in XYZ and GSF format. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_C02, ['Hogan Group Hydrographic Survey – Bass Strait'] which departed Hobart on the 4th May 2017 and came alongside Bell Bay following completion of the survey on the 14th May 2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information [and watercolumn backscatter] around Bass Strait. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 236 files totalling 9.5 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data. Processed data had outliers removed. Processed line data are not available in *.gsf and ascii format, however can be requested if required. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_C01, 'GAB deep water geological and benthic ecology program' which departed Hobart on the 11 April 2017 and returned to Hobart on the 28 April 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter around the GAB. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 118 files totalling 47.4 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_V02, which departed Hobart on the 14 March 2016 and returned to Hobart on the 16 April 2016. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information around the shelf and slope south directly south of Tasmania. Ping rate varied according to depth. Data are stored in *.all raw format at CSIRO Oceans and Atmosphere. There are 41 files totaling 5.4 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Tide corrections were not applied to the processed data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.