This record describes sub bottom profiler data collected on RV Investigator voyage IN2018_T01, titled: "Physical and biogeochemical gradients in the East Australian Current." The voyage took place from Hobart (TAS) to Brisbane (QLD) between April 5 and April 14, 2018. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (24 files 3.42 GB) raw and .seg (29 files 3.4 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2021_V02 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 14th April 2021 and returned to Hobart on the 28th April 2021. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage (i.e. during transits). Data are stored in .raw (1190 files 4.50 GB) raw and .seg (1190 files 4.48 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping (for depths > 200 m), and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2017_V02, 'SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania' which departed Hobart on the 17 March 2017 and returned to Hobart on the 28 March 2017. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (18 files 142 MB) raw and .seg (19 files 141 MB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2020_V06, titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 3, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. The data collected was suitable for the tasks required surrounding Macquarie Island itself, but was of mostly low quality surrounding steep dipping terrain and the Macquarie ridge itself. Data are stored in .raw (3,465 files 14.4 GB) raw and .seg (3,502 files 14.4 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2019_V05, titled: "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between September 9 and September 29, 2019 departing from Brisbane (QLD) and arriving in Brisbane. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (598 files 5.6 GB) raw and .seg (1,210 files 11.1 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2018_V06, which departed Hobart on the 22-Nov-2018 and returned to Hobart on the 19-Dec-2018. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged [continuously/sporadically] for the extent of the voyage. Data are stored in .raw (5900 files 34 GB) raw and .seg (5000 files 19 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2022_V03, "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania", which departed Hobart on the 4th May 2022 and returned to Hobart on the 15th May 2022 (AEST). The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage, except for periods of mooring recovery/deployment when all acoustic systems were mandated to be suspended to communicate with the mooring beacons, and when holding station at mooring sites. Data are stored in .raw (382 files 3.04 GB) raw and .seg (382 files 3.04 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, bandpass filter (for depths < ~200m) or matched filter with replica shaping (for depths > ~200 m), and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2017_C02, ['Hogan Group Hydrographic Survey – Bass Strait'] which departed Hobart on the 4th May 2017 and came alongside Bell Bay following completion of the survey on the 14th May 2017. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw and .seg formats (4537 files 70 GB) at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2021_V03, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South (multi-year)." The voyage took place from Hobart (TAS) to Brisbane (QLD) between May 8 and June 3, 2021. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (9,960 files 20.9 GB) raw and .seg (9,956 files 20.8 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2022_V06, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between July 14 and July 30, 2022 (AEST), departing from Brisbane and returning to Brisbane. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (334 files 6.56 GB) raw and .seg (332 files 6.53 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request