This record describes XBT data collected on RV Investigator voyage IN2022_V06, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between July 14 and July 30, 2022 (AEST), departing from Brisbane and returning to Brisbane. A total of 17 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2021_V02 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 14th April 2021 and returned to Hobart on the 28th April 2021. A total of 9 XBT casts were conducted over the duration of this voyage; 2 of which were discounted, one for testing (xbt_001) and one was a bad cast (xbt_004). Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2024_V01, 'Multidisciplinary Investigations of the Southern Ocean' which departed Hobart on 05/01/2024 and returned to Fremantle on 05/03/2024. A total of 109 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes expendable bathythermograph, XBT, data collected on the RV Investigator voyage IN2016_V04, 'Monitoring Ocean Change and Variability along 170° W from the ice edge to the equator', which departed Sydney on the 31 Aug2016 and returned to Brisbane, on the 23 Sep 2016. A total of 9 XBT casts were conducted over the duration of this voyage on the ship XBT system. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on the Marine National Facility (MNF) RV Investigator voyage IN2024_V02, titled "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania." The voyage took place between March 31, 2024 and April 19, 2024 (AEST), departing from Hobart and returning to Hobart. A total of 3 XBT casts were conducted over the duration of this voyage. Two casts were successful, and one cast failed due to a bad connection and did not record after deployment. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2020_V06 titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 3, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). A total of 23 XBT casts were conducted over the duration of this voyage. Of these casts, 14 were considered acceptable, 4 were bad (failed or high SST) (i.e. 014, 015, 016, 019), 4 were good to only ~200 m (i.e. 003, 004, 005, 006) and 1 had no data at the start of the profile (i.e. 017). Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2021_E01 (Trials and Calibration) which departed Hobart on the 10th November 2021 and returned to Hobart on the 14th November 2021. The purpose of this voyage was to undertake post port-period equipment calibrations and commissioning, sea trials and personnel training. A total of 1 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2021_V03, titled: "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27o S." The voyage took place between May 8 and June 3, 2021 departing from Hobart (TAS) and arriving in Brisbane (QLD). Data for 36 deployments were acquired using the Sea-Bird SBE911 CTD 24, fitted with 19 twelve litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO -supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. The final conductivity calibration was based on a single deployment grouping. The final calibration from the primary sensor had a standard deviation (SD) of 0.0019084 PSU, when rounded this is outside our target of ‘better than 0.002 PSU’, so the cut-off was adjusted to 0.003 PSU. The standard product of 1 decibar binned averaged were produced using data from the primary sensors. Cast 10 was ended prematurely so CapPro could not process cast properly. To overcome this, in MATLAB, the end of cast 9 was attached to the end of cast 10. This data will not appear in the raw files from SeaSave and should not affect processing, as CapPro will remove out of water data before processing but needs this data to find the end of the cast. During cast 12 the CTD landed on the bottom of the ocean floor, no damage was found, and all subsequent casts performed as expected. Prior to cast 31, due to some discrepancies between the primary and secondary sensors, the Seagoing Instrumentation Team swapped the secondary pump. This resolved the particular issue. Bottle seven had intermittent problems firing reliably. Initially the release magnet was swapped and all further casts had a backup fired with bottle 7, however it was later found that the root cause was corrosion under the epoxy. As a precaution, the whole trigger mechanism was swapped. The dissolved oxygen data calibration fit had a SD of 0.84461μM. The agreement between the CTD and bottle data was good. PAR, Transmissometer, CDOM, Altimeter and Ecotriplet were also installed on the auxiliary A/D channels of the CTD. The collected data were subsequently processed and archived within the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.

This record describes XBT data collected on RV Investigator voyage IN2023_V06, titled: "Understanding Eddy Interactions and Their Impacts In the East Australian Current System." The voyage took place between October 9 and November 2, 2023, departing from Sydney (NSW) and returning to Sydney. A total of 72 XBT casts were conducted over the duration of this voyage (66 were successful). There were an additional 35 auto-launcher XBTs launched for testing purposes. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes XBT data collected on RV Investigator voyage IN2019_E01, 'Post-Dry Dock Calibration Trials' which departed Singapore on the 19th July 2019 and returned to Cairns on the 2nd August 2019. A total of 2 XBT casts were conducted over the duration of this voyage. Data are stored in netCDF files at CSIRO. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.