This record describes magnetometer data collected on RV Investigator voyage IN2023_V03, SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania which departed Hobart on May 12, 2023 and returned to Hobart on May 25, 2023. The SeaSPY2 magnetometer uses an omnidirectional Overhauser sensor that requires no realignment or recalibration and has no heading error. The instrument has an absolute accuracy of 0.1 nT, sensor sensitivity of 0.01 nT and resolution of 0.001 nT. Data are stored in .CSV and .MMS data files at CSIRO. 34.0MB of raw data was acquired in this dataset. No processing has been conducted on this data. The magnetometer was towed 300 m astern of the ship and a layback value of 361 m was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes magnetometer data collected on RV Investigator voyage IN2025_V02, ' SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania ' which departed Hobart on the 26th March and returned to Hobart on the 14th April 2025. The SeaSPY2 magnetometer uses an omnidirectional Overhauser sensor that requires no realignment or recalibration and has no heading error. The instrument has an absolute accuracy of 0.1 nT, sensor sensitivity of 0.01 nT and resolution of 0.001 nT. Data are stored in .CSV and .MMS data files at CSIRO. 29.69 MB of raw data was acquired in this dataset. No processing has been conducted on this data. The magnetometer was towed 300 m astern of the ship and a layback value of 361 m was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes magnetometer data collected on RV Investigator voyage IN2020_V06, titled "Probing the Australian-Pacific Plate Boundary: Macquarie Ridge in 3-D." The voyage took place between October 8 and November 3, 2020 departing from Hobart (TAS) and arriving in Hobart (TAS). The SeaSPY2 magnetometer uses an omnidirectional Overhauser sensor that requires no realignment or recalibration and has no heading error. The instrument has an absolute accuracy of 0.1 nT, sensor sensitivity of 0.01 nT and resolution of 0.001 nT. Data are stored in .CSV and .MMS data files at CSIRO. 219 MB of raw data was acquired in this dataset. No processing has been conducted on this data. The magnetometer was towed 300 m astern of the ship and a layback value of 361 m was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes the Magnetometer data collected on the RV Investigator Charter Voyage IN2015_C01, titled "Great Australian Bight (GAB) Deep Water Geological and Benthic Ecology Program." This charter voyage took place from Hobart to Port Lincoln between the 22nd of October and the 28th of November 2015. The Magnetometer unit is used to measure magnetic field strength whilst towed through the water column. The magnetometer and BOB acquisition software was kindly provided on-loan by Geoscience Australia (GA). This dataset has been archived within the CSIRO O&A Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset is contained in the voyage report for this voyage and data processing report. Please see documentation and data links. Raw data and partially processed data is available on request.

This record describes magnetometer data collected from the Marine National Facility (MNF) RV Investigator Voyage IN2020_V01, titled: “Development of William’s Ridge, Kerguelen Plateau: tectonics, hotspot magmatism, microcontinents, and Australia’s Extended Continental Shelf” between January 08 and March 06, 2020 departing from Henderson (WA) and returning back to Fremantle (WA). The instrument is a Marine Magnetics SeaSPY2 magnetometer and was deployed continuosly for the voyage except during 2D Multi-channel Seismic acquisition and Rock Dredging operations. Data are stored in .CSV and .MMS data files at CSIRO. 40.7 GB of raw data was acquired in this dataset. No processing has been conducted on this data. The magnetometer was towed 300m astern of the ship and a layback value of 361m was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes magnetometer data collected on RV Investigator voyage IN2019_V04, 'Hotspot dynamics in the Coral Sea: connections between the Australian plate and deep Earth' which departed Cairns on the 7th August 2019 and returned to Brisbane on the 3rd September 2019. The instrument is a Marine Magnetics SeaSPY2 magnetometer and was deployed while transiting during the voyage in the Coral Sea, within the EEZ of Australia, Papua New Guinea, Solomon Islands and New Caledonia. Data are stored in .CSV and .MMS data files at CSIRO. 872 MB of raw data was acquired in this dataset. No processing has been conducted on this data. The SeaSPY2 magnetometer uses an omnidirectional Overhauser sensor that requires no realignment or recalibration and has no heading error. The instrument has an absolute accuracy of 0.1 nT, sensor sensitivity of 0.01 nT and resolution of 0.001 nT.” The magnetometer was towed 300m astern of the ship and a layback value of 361m was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes magnetometer data collected on RV Investigator voyage IN2022_V08, titled "Biodiversity Assessment of Australia’s Indian Ocean Territories", which departed Darwin on September 30 and returned to Fremantle on November 3, 2022. This was a continuation of voyage IN2021_v04. The SeaSPY2 magnetometer uses an omnidirectional Overhauser sensor that requires no realignment or recalibration and has no heading error. The instrument has an absolute accuracy of 0.1 nT, sensor sensitivity of 0.01 nT and resolution of 0.001 nT. Data are stored in .CSV and .MMS data files at CSIRO. 92 MB of raw data was acquired in this dataset. No processing has been conducted on this data. The magnetometer was towed ~300 m astern of the ship and a layback value of 361 was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes magnetometer data collected on RV Investigator voyage voyage IN2020_E01 (Trials and Calibration) which departed Hobart on the 29th July 2020 and returned to Hobart on the 6th August 2020. The purpose of this voyage was to undertake post port-period equipment calibrations and commissioning, sea trials and personnel training. The SeaSPY2 magnetometer uses an omnidirectional Overhauser sensor that requires no realignment or recalibration and has no heading error. The instrument has an absolute accuracy of 0.1 nT, sensor sensitivity of 0.01 nT and resolution of 0.001 nT. Data are stored in .CSV and .MMS data files at CSIRO. 0.68 MB of raw data was acquired in this dataset. No processing has been conducted on this data. The magnetometer was towed 300 m astern of the ship and a layback value of 361 m was applied to the magnetometer data. This was the total distance behind the ship's positioning reference point. Note: The magnetometer was only deployed for a short period (between 23:04 & 23:51 on the 03/08/2020 - UTC) for training purposes only. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2023_V01, titled "Antarctic Bottom Water Production in the past: Records from marine sediments, Cape Darnley, East Antarctica". The voyage took place between 25th January, 2023 and 2nd March, 2023 departing from Henderson's (WA) and arriving in Hobart (TAS). The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 74 files totalling 582 MB of raw data in this dataset. Wharf ties were undertaken at Henderson_AMC Wharf and Hobart Wharf using a Scintrex Autograv CG-5. Wharf tie data can be found in gravity_data folder\Hobart_wharf_tie_2023_03_02.txt & Henderson_AMC_wharf_tie_2023_01_24.txt, which is stored with the raw data. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes gravity data collected on RV Investigator voyage IN2018_V02 , "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania" and "Subantarctic Biogeochemistry of Carbon and Iron, Southern Ocean Time Series site" which departed Hobart on the 03 March 2018 and returned to Hobart briefly on 12 March and finally concluded on the 21 March 2018 in Hobart. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 25 files totalling 78.6 MB of raw data in this dataset. Wharf tie data can be found in Hobart wharf_tie_2016_07_20.txt, which is stored with the raw data. Coverage is patchy due to GSM staffing levels and rough weather. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.