데이터셋 상세
호주
RV Investigator Voyage IN2024 E01 SBP29 Sub-bottom Profiler Data
This record describes sub bottom profiler data collected on RV Investigator voyage IN2024_E01, 'Trials and Calibrations' which departed Hobart on the 28th October and returned to Hobart on the 6th November 2024. The Kongsberg SBP29 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP29 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2 to 9 kHz. The SBP29 was logged continuously for the extent of the voyage. NOTE: The system was newly installed in Singapore as part of the vessel's mid-life refit and this voyage constituted the formal Sea Acceptance Tests (SAT) for the system. Data are stored in .raw (50 files 859 MB) raw and .seg (51 files 850 MB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, and matched filter with replica shaping (for water depths typically >200m) or Bandpass filtering 2-9 kHz (in water depths typically <200 m). Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
연관 데이터
RV Investigator Voyage IN2021 E01 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2021_E01 (Trials and Calibration), which departed Hobart on the 10th November 2021 and returned to Hobart on the 14th November 2021. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged [continuously/sporadically] for the extent of the voyage. Data are stored in .raw (596 files, 1.81GB) raw and .seg (595 files, 1.8 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, bandpass filter (for depths < ~200m) or matched filter with replica shaping (for depths > ~200 m), and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2017 E04 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2017_E04, Trials voyage, which departed Hobart on the 7th of December 2017 and returned to Hobart on the 11th of December 2017. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (17 files 1.83 GB) raw and .seg (17 files 1.88 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2018 V06 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2018_V06, which departed Hobart on the 22-Nov-2018 and returned to Hobart on the 19-Dec-2018. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged [continuously/sporadically] for the extent of the voyage. Data are stored in .raw (5900 files 34 GB) raw and .seg (5000 files 19 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2019 T01 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2019_T01, CAPSTAN which departed Hobart on the 29th April 2019 and returned to Fremantle on the 11th May 2019. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage except for period mapping the shipping sealane from Albany to near Fremantle. Data are stored in .raw (130 files 5.35 GB) raw and .seg (130 files 5GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2015 E04 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator sea trial voyage IN2015_E04, which departed Hobart 2015-04-25 and returned on 2015-04-28. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged for a few hours while testing for acoustic interference (01:30 2016-04-26 - 11:15 2016-04-26) Data are stored in .raw (8 files 454 MB) raw and .seg (8 files 448 MB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2017 C01 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2017_C01, 'GAB deep water geological and benthic ecology program' which departed Hobart on the 11 April 2017 and returned to Hobart on the 28 April 2017. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw 258 files 5.58 GB raw and .seg 258 files 5.41 GB segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2023 E01 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2023_E01, Sea trials and Calibrations which departed Fremantle on the 06/01/2023 and returned to Fremantle on the 12/01/2023 (UTC). The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (271 files 5.99 GB) raw and .seg (270 files 5.93 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2023 V04 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on the RV Investigator voyage IN2023_V04, International nutrient inter-comparison Voyage (INIV) which departed Hobart on the 05/06/23 and returned to Hobart on the 18/06/23. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (247 files 5.39 GB) raw and .seg (255 files 5.34 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.
RV Investigator Voyage IN2024 V01 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2024_V01, 'Multidisciplinary Investigations of the Southern Ocean' which departed Hobart on 05/01/2024 and returned to Fremantle on 05/03/2024. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor from Hobart, along the Antarctic ice edge to Fremantle. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw and .seg formats at CSIRO. There are 775 files totalling 29.8 GB of raw data in this dataset. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request
RV Investigator Voyage IN2016 E02 SBP120 Sub-bottom Profiler Data
공공데이터포털
This record describes sub bottom profiler data collected on RV Investigator voyage IN2016_E02, 'MNF Equipment Sea Trials' which departed Sydney on the 16th December 2016 and returned to Hobart on the 20th December 2016. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (65 files 2.49 GB) raw and .seg (65 files 2.48 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request