This record describes sub bottom profiler data collected on RV Investigator voyage IN2022_V03, "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania", which departed Hobart on the 4th May 2022 and returned to Hobart on the 15th May 2022 (AEST). The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage, except for periods of mooring recovery/deployment when all acoustic systems were mandated to be suspended to communicate with the mooring beacons, and when holding station at mooring sites. Data are stored in .raw (382 files 3.04 GB) raw and .seg (382 files 3.04 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, bandpass filter (for depths < ~200m) or matched filter with replica shaping (for depths > ~200 m), and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2021_V02 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 14th April 2021 and returned to Hobart on the 28th April 2021. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage (i.e. during transits). Data are stored in .raw (1190 files 4.50 GB) raw and .seg (1190 files 4.48 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping (for depths > 200 m), and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2023_V03, SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania which departed Hobart on May 12, 2023 and returned to Hobart on May 25, 2023. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (219 files 4.87 GB) raw and .seg (218 files 4.85 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2017_V02, 'SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania' which departed Hobart on the 17 March 2017 and returned to Hobart on the 28 March 2017. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (18 files 142 MB) raw and .seg (19 files 141 MB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2019_V02, titled 'SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania; Subantarctic Biogeochemistry of Carbon and Iron, Southern Ocean Time Series site', which departed Hobart on the 14 March 2019 and returned to Hobart on the 5 April 2019. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (159 files 2.85 GB) raw and .seg (647 files 6.75 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2025_V02, ' SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania ' which departed Hobart on the 26th March and returned to Hobart on the 14th April 2025. The Kongsberg SBP29 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2 to 9 kHz. The SBP29 was logged continuously for the extent of the voyage. Data are stored in .raw (251 files 5.66 GB) raw and .seg (250 files 5.63 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, and matched filter with replica shaping (for water depths typically >200m) or Bandpass filtering 2-9 kHz (in water depths typically <200 m). Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2020_V09 (SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania), which departed Hobart on the 27th August 2020 and returned to Hobart on the 12th September 2020. In addition to the tasks at the SOTS site the voyage also recovered a Rintoul mooring that was deployed during IN2020_V05. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage (i.e. during transits). Data are stored in .raw (572 files 5.95 GB) raw and .seg (572 files 5.95 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, and time variable gain. No attribute calculation for instantaneous amplitude was applied. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2018_V07, SOTS: Southern Ocean Time Series Automated Moorings for Climate and Carbon Cycle Studies Southwest Tasmania which departed Hobart on the 20/08/2018 and returned to Hobart on the 25/08/2018. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (60 files 1.3 GB) raw and .seg (49 files 1.3 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2018_V02 , "SOTS: Southern Ocean Time Series automated moorings for climate and carbon cycle studies southwest of Tasmania" and "Subantarctic Biogeochemistry of Carbon and Iron, Southern Ocean Time Series site" which departed Hobart on the 03 March 2018 and returned to Hobart briefly on 12 March and finally concluded on the 21 March 2018 in Hobart. Unfortunately a hardware error caused the instrument to be turned off from 5 March 2018. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged sporadically for the extent of the voyage. Data are stored in .raw (23 files 2.43 GB) raw and .seg (27 files 2.41 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request

This record describes sub bottom profiler data collected on RV Investigator voyage IN2022_V06, titled "Integrated Marine Observing System: monitoring of East Australian Current property transports at 27 degrees South." The voyage took place between July 14 and July 30, 2022 (AEST), departing from Brisbane and returning to Brisbane. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in .raw (334 files 6.56 GB) raw and .seg (332 files 6.53 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, matched filter with replica shaping, an attribute calculation for instantaneous amplitude and time variable gain. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request