A grid surface delineating soil depth (cm) down to 2 metres for land areas across Tasmania at a spatial resolution of 30m.

A grid surface delineating soil drainage classes (Very poor, Poor, Imperfect, Moderate, Well, Rapid) for land areas across Tasmania at a spatial resolution of 30m.

This layer depicts the line boundaries only of available Reconnaissance Soil maps in Tasmania available on LISTmap as Soil Types.

This map is one of a series of soil landscape maps that are intended for all of central and eastern NSW, based on standard 1:100,000 and 1:250,000 topographic sheets. The map provides an inventory of soil and landscape properties of the area and identifies major soil and landscape qualities and constraints. It integrates soil and topographic features into single units with relatively uniform land management requirements. Soils are described in terms of soil materials in addition to the Australian Soil Classification and the Great Soil Group systems. Related Datasets: The dataset area is also covered by the mapping of the Soil and Land Resources of the Hawkesbury-Nepean Catchment and Hydrogeological landscapes of NSW. Online Maps: This and related datasets can be viewed using eSPADE (NSW’s soil spatial viewer), which contains a suite of soil and landscape information including soil profile data. Many of these datasets have hot-linked soil reports. An alternative viewer is the SEED Map; an ideal way to see what other natural resources datasets (e.g. vegetation) are available for this map area. Reference: King D.P., 1992, Soil Landscapes of the Wallerawang 1:100,000 Sheet map and report, NSW Department of Conservation and Land Management, Sydney.

This is Version 1 of the Australian pH (Water) product of the Soil and Landscape Grid of Australia. The map gives a modelled estimate of the spatial distribution of soil pH (1:5 soil water solution) in soils across Australia. The Soil and Landscape Grid of Australia has produced a range of digital soil attribute products. Each product contains six digital soil attribute maps, and their upper and lower confidence limits, representing the soil attribute at six depths: 0-5 cm, 5-15 cm, 15-30 cm, 30-60 cm, 60-100 cm and 100-200 cm. These depths are consistent with the specifications of the GlobalSoilMap.net project. The digital soil attribute maps are in raster format at a resolution of 3 arc sec (~90 x 90 m pixels). Detailed information about the Soil and Landscape Grid of Australia can be found at - SLGA. Attribute Definition: pH of a 1:5 soil water solution; Units: None; Period (temporal coverage; approximately): 1950-2021; Spatial resolution: 3 arc seconds (approx 90 m); Total number of gridded maps for this attribute: 18; Number of pixels with coverage per layer: 2007M (49200 * 40800); Data license : Creative Commons Attribution 4.0 (CC BY); Target data standard: GlobalSoilMap specifications; Format: Cloud Optimised GeoTIFF;

These are the soil attribute products of the Tasmanian Soil Attribute Grids. There are 8 soil attribute products available from the TERN Soil Facility. Each soil attribute product is a collection of 6 depth slices. Each depth raster has an upper and lower uncertainty limit raster associated with it. The depths provided are 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm, consistent with the Specifications of the GlobalSoilMap. Attributes: pH - Water (pHw); Electical Conductivity dS/m (ECD); Clay % (CLY); Sand % (SND); Silt % (SLT); Bulk Density - Whole Earth Mg/m3 (BDw); Organic Carbon % (SOC); Coarse Fragments >2mm (CFG). These products were developed using datasets held by the Tasmanian Department of Primary Industries Parks Water & Environment (DPIPWE) Soils Database. The mapping was made by using spatial modelling and digital soil mapping (DSM) techniques to produce a fine resolution 3 arc-second grid of soil attribute values and their uncertainties, across all of Tasmania. Note: Previous versions of this collection contained a Depth layer. This has been removed as the units do not comply with Global Soil Map specifications.

These are products of the Soil and Landscape Grid of Australia Facility generated through disaggregation of the Western Australian soil mapping. There are 9 soil attribute products available from the Soil Facility: Available Water Holding Capacity - Volumetric (AWC); Bulk Density - Whole Earth (BDw); Bulk Density - Fine Earth (BDf); Clay (CLY); Course Fragments (CFG); Electrical Conductivity (ECD); pH Water (pHw); Sand (SND); Silt (SLT). Each soil attribute product is a collection of 6 depth slices. Each depth raster has an upper and lower uncertainty limit raster associated with it. The depths provided are 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm, consistent with the Specifications of the GlobalSoilMap. The DSMART tool (Odgers et al. 2014) tool was used in a downscaling process to translate legacy soil landscape mapping to 3” resolution (approx. 100m cell size) raster predictions of soil classes (Holmes et al. Submitted). The soil class maps were then used to produce corresponding soil property surfaces using the PROPR tool (Odgers et al. 2015; Odgers et al. Submitted). Legacy mapping was compiled for the state of WA from surveys ranging in map scale from 1:20,000 to 1:2,000,000 (Schoknecht et al., 2004). The polygons are attributed with the soils and proportions of soils within polygons however individual soils were not explicitly spatially defined. These new disaggregated map products aim to incorporate expert soil surveyor knowledge embodied in legacy polygon soil maps, while providing re-interpreted soil spatial information at a scale that is more suited to on-ground decision making. Note: The DSMART-derived dissagregated legacy soil mapping products provide different spatial predictions of soil properties to the national TERN Soil Grid products derived by Cubist (data mining) and kriging based on site data by Viscarra Rossel et al. (Submitted). Where they overlap, the national prediction layers and DSMART products can be considered complementary predictions. They will offer varying spatial reliability (/ uncertainty) depending on the availability of representative site data (for national predictions) and the scale and expertise of legacy mapping. The national predictions and DSMART disaggregated layers have also been merged as a means to present the best available (lowest statistical uncertainty) data from both products (Clifford et al. In Prep). Previous versions of this collection contained Depths layers. These have been removed as the units do not comply with Global Soil Map specifications.

This is Version 1 of the Australian Soil Cation Exchange Capacity product of the Soil and Landscape Grid of Australia. The map gives a modelled estimate of the spatial distribution of cation exchange capacity in soils across Australia. The Soil and Landscape Grid of Australia has produced a range of digital soil attribute products. Each product contains six digital soil attribute maps, and their upper and lower confidence limits, representing the soil attribute at six depths: 0-5 cm, 5-15 cm, 15-30 cm, 30-60 cm, 60-100 cm and 100-200 cm. These depths are consistent with the specifications of the GlobalSoilMap.net project - GlobalSoilMaps. The digital soil attribute maps are in raster format at a resolution of 3 arc sec (~90 x 90 m pixels). Detailed information about the Soil and Landscape Grid of Australia can be found at - SLGA Attribute Definition: Cation Exchange Capacity (Units: meq/100g); Period (temporal coverage; approximately): 1970-2022; Spatial resolution: 3 arc seconds (approx 90 m); Total number of gridded maps for this attribute: 18; Number of pixels with coverage per layer: 2007M (49200 * 40800); Target data standard: GlobalSoilMap specifications; Format: Cloud Optimised GeoTIFF.

This is Version 1 of the Soil Bacteria and Fungi Beta Diversity product of the Soil and Landscape Grid of Australia. The Soil and Landscape Grid of Australia has produced a range of digital soil attribute products. These products provide estimates of the Beta Diversity of soil fungi and bacteria. The digital soil attribute maps are in raster format at a resolution of 3 arc sec (~90 x 90 m pixels). These maps are generated using Digital Soil Mapping (DSM) methods. Detailed information about the Australian DSM an be found at AusSoilsDSM Attribute Definition: Soil Bacteria and Fungi Beta Diversity (Units: NA); Period (temporal coverage; approximately): 1950-2022; Spatial resolution: 3 arc seconds (approximately 90 m); Total number of gridded maps for this attribute: 6; Number of pixels with coverage per layer: 2007M (49200 * 40800); Total size before compression: about 8GB; Total size after compression: about 4GB; Format: Cloud Optimised GeoTIFF.