This South-east Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Groundwater in Australia's fractured rock aquifers is stored in fractures, joints, bedding planes, and cavities within the rock mass, comprising about 40% of the country's groundwater. Much of this water can be utilized for irrigation, town water supplies, stock watering, and domestic use, based on state regulations. Fractured systems account for approximately 33% of all bores in Australia but contribute to only 10% of total extraction due to variable groundwater yield. Quantifying groundwater movement in fractured rock systems is challenging, as it depends on the distribution of major fractures. Groundwater flow direction is more influenced by the orientation of fractures than hydraulic head distribution. Recharge in fractured rock aquifers is typically localized and intermediate. In Eastern Australia, New South Wales' Lachlan Orogen, which extends from central and eastern New South Wales to Victoria and Tasmania, is a significant region with diverse lithological units, including deep marine turbidites, shallow marine to sub-areal sediments, extensive granite bodies, and volcano-intrusive complexes. This region contains various mineral deposits, such as orogenic gold, volcanic-hosted massive sulphide, sediment-hosted Cu-Au, porphyry Au-Cu, and granite-related Sn. Note: The study does not include additional Orogens in the east (New England) and west (Thomson and Delamerian). The Delamerian Orogen is present throughout western Tasmania.

This South-east Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Groundwater in Australia's fractured rock aquifers is stored in fractures, joints, bedding planes, and cavities within the rock mass, comprising about 40% of the country's groundwater. Much of this water can be utilized for irrigation, town water supplies, stock watering, and domestic use, based on state regulations. Fractured systems account for approximately 33% of all bores in Australia but contribute to only 10% of total extraction due to variable groundwater yield. Quantifying groundwater movement in fractured rock systems is challenging, as it depends on the distribution of major fractures. Groundwater flow direction is more influenced by the orientation of fractures than hydraulic head distribution. Recharge in fractured rock aquifers is typically localized and intermediate. In Eastern Australia, New South Wales' Lachlan Orogen, which extends from central and eastern New South Wales to Victoria and Tasmania, is a significant region with diverse lithological units, including deep marine turbidites, shallow marine to sub-areal sediments, extensive granite bodies, and volcano-intrusive complexes. This region contains various mineral deposits, such as orogenic gold, volcanic-hosted massive sulphide, sediment-hosted Cu-Au, porphyry Au-Cu, and granite-related Sn. Note: The study does not include additional Orogens in the east (New England) and west (Thomson and Delamerian). The Delamerian Orogen is present throughout western Tasmania.

This South-east Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Groundwater in Australia's fractured rock aquifers is stored in fractures, joints, bedding planes, and cavities within the rock mass, comprising about 40% of the country's groundwater. Much of this water can be utilized for irrigation, town water supplies, stock watering, and domestic use, based on state regulations. Fractured systems account for approximately 33% of all bores in Australia but contribute to only 10% of total extraction due to variable groundwater yield. Quantifying groundwater movement in fractured rock systems is challenging, as it depends on the distribution of major fractures. Groundwater flow direction is more influenced by the orientation of fractures than hydraulic head distribution. Recharge in fractured rock aquifers is typically localized and intermediate. In Eastern Australia, New South Wales' Lachlan Orogen, which extends from central and eastern New South Wales to Victoria and Tasmania, is a significant region with diverse lithological units, including deep marine turbidites, shallow marine to sub-areal sediments, extensive granite bodies, and volcano-intrusive complexes. This region contains various mineral deposits, such as orogenic gold, volcanic-hosted massive sulphide, sediment-hosted Cu-Au, porphyry Au-Cu, and granite-related Sn. Note: The study does not include additional Orogens in the east (New England) and west (Thomson and Delamerian). The Delamerian Orogen is present throughout western Tasmania.

This South-east Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Groundwater in Australia's fractured rock aquifers is stored in fractures, joints, bedding planes, and cavities within the rock mass, comprising about 40% of the country's groundwater. Much of this water can be utilized for irrigation, town water supplies, stock watering, and domestic use, based on state regulations. Fractured systems account for approximately 33% of all bores in Australia but contribute to only 10% of total extraction due to variable groundwater yield. Quantifying groundwater movement in fractured rock systems is challenging, as it depends on the distribution of major fractures. Groundwater flow direction is more influenced by the orientation of fractures than hydraulic head distribution. Recharge in fractured rock aquifers is typically localized and intermediate. In Eastern Australia, New South Wales' Lachlan Orogen, which extends from central and eastern New South Wales to Victoria and Tasmania, is a significant region with diverse lithological units, including deep marine turbidites, shallow marine to sub-areal sediments, extensive granite bodies, and volcano-intrusive complexes. This region contains various mineral deposits, such as orogenic gold, volcanic-hosted massive sulphide, sediment-hosted Cu-Au, porphyry Au-Cu, and granite-related Sn. Note: The study does not include additional Orogens in the east (New England) and west (Thomson and Delamerian). The Delamerian Orogen is present throughout western Tasmania.

This Southern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Crustal elements are crustal-scale geological regions primarily based on composite geophysical domains, each of which shows a distinctive pattern of magnetic and gravity anomalies. These elements generally relate to the basement, rather than the sedimentary basins. The South Australian Element comprises the Archean-Mesoproterozoic Gawler Craton and Paleo-Mesoproterozoic Curnamona Province, formed over billions of years through sedimentation, volcanism, magmatism, and metamorphism. The region experienced multiple continental-continent collisions, leading to the formation and breakup of supercontinents like Nuna and Rodinia, along with periods of extensional tectonism. Around 1,400 Ma, both the Gawler Craton and Curnamona Province were cratonised, and during the building of the Rodinia supercontinent (1,300-700 Ma), the present configuration of the region emerged. The area between the Gawler and Curnamona provinces contains Neoproterozoic to Holocene cover, including the Adelaide Superbasin, with the Barossa Complex as its basement, believed to be part of the Kimban Orogen. The breakup of Rodinia in the Neoproterozoic (830-600 Ma) resulted in mafic volcanism and extensional episodes, leading to the formation of the Adelaide Superbasin, characterized by marine rift and sag basins flanking the Gawler Craton and Curnamona Province. During the Mesozoic and Cenozoic, some tectonic structures were rejuvenated, while sedimentary cover obscured much of the now flatter terrain. Metamorphic facies in the region vary, with the Gawler and Curnamona provinces reaching granulite facies, while the Adelaide Superbasin achieved the amphibolite facies. The Gawler Craton contains rocks dating back to approximately 3,150 Ma, while the Curnamona Province contains rocks from 1,720 to 1,550 Ma. These ancient regions have undergone various deformation and metamorphic events but have remained relatively stable since around 1,450 Ma. The Adelaide Superbasin is a large sedimentary system formed during the Neoproterozoic to Cambrian, with distinct provinces. It started as an intracontinental rift system resulting from the breakup of Rodinia and transitioned into a passive margin basin in the southeast and a failed rift in the north. Later uplift and re-instigated rifting led to the deposition of thick Cambrian sediments overlying the Neoproterozoic rocks. Overlying basins include late Palaeozoic to Cenozoic formations, such as the Eromanga Basin and Lake Eyre Basin, which are not part of the assessment region but are adjacent to it.

This Southern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Crustal elements are crustal-scale geological regions primarily based on composite geophysical domains, each of which shows a distinctive pattern of magnetic and gravity anomalies. These elements generally relate to the basement, rather than the sedimentary basins. The South Australian Element comprises the Archean-Mesoproterozoic Gawler Craton and Paleo-Mesoproterozoic Curnamona Province, formed over billions of years through sedimentation, volcanism, magmatism, and metamorphism. The region experienced multiple continental-continent collisions, leading to the formation and breakup of supercontinents like Nuna and Rodinia, along with periods of extensional tectonism. Around 1,400 Ma, both the Gawler Craton and Curnamona Province were cratonised, and during the building of the Rodinia supercontinent (1,300-700 Ma), the present configuration of the region emerged. The area between the Gawler and Curnamona provinces contains Neoproterozoic to Holocene cover, including the Adelaide Superbasin, with the Barossa Complex as its basement, believed to be part of the Kimban Orogen. The breakup of Rodinia in the Neoproterozoic (830-600 Ma) resulted in mafic volcanism and extensional episodes, leading to the formation of the Adelaide Superbasin, characterized by marine rift and sag basins flanking the Gawler Craton and Curnamona Province. During the Mesozoic and Cenozoic, some tectonic structures were rejuvenated, while sedimentary cover obscured much of the now flatter terrain. Metamorphic facies in the region vary, with the Gawler and Curnamona provinces reaching granulite facies, while the Adelaide Superbasin achieved the amphibolite facies. The Gawler Craton contains rocks dating back to approximately 3,150 Ma, while the Curnamona Province contains rocks from 1,720 to 1,550 Ma. These ancient regions have undergone various deformation and metamorphic events but have remained relatively stable since around 1,450 Ma. The Adelaide Superbasin is a large sedimentary system formed during the Neoproterozoic to Cambrian, with distinct provinces. It started as an intracontinental rift system resulting from the breakup of Rodinia and transitioned into a passive margin basin in the southeast and a failed rift in the north. Later uplift and re-instigated rifting led to the deposition of thick Cambrian sediments overlying the Neoproterozoic rocks. Overlying basins include late Palaeozoic to Cenozoic formations, such as the Eromanga Basin and Lake Eyre Basin, which are not part of the assessment region but are adjacent to it.

This Southern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Crustal elements are crustal-scale geological regions primarily based on composite geophysical domains, each of which shows a distinctive pattern of magnetic and gravity anomalies. These elements generally relate to the basement, rather than the sedimentary basins. The South Australian Element comprises the Archean-Mesoproterozoic Gawler Craton and Paleo-Mesoproterozoic Curnamona Province, formed over billions of years through sedimentation, volcanism, magmatism, and metamorphism. The region experienced multiple continental-continent collisions, leading to the formation and breakup of supercontinents like Nuna and Rodinia, along with periods of extensional tectonism. Around 1,400 Ma, both the Gawler Craton and Curnamona Province were cratonised, and during the building of the Rodinia supercontinent (1,300-700 Ma), the present configuration of the region emerged. The area between the Gawler and Curnamona provinces contains Neoproterozoic to Holocene cover, including the Adelaide Superbasin, with the Barossa Complex as its basement, believed to be part of the Kimban Orogen. The breakup of Rodinia in the Neoproterozoic (830-600 Ma) resulted in mafic volcanism and extensional episodes, leading to the formation of the Adelaide Superbasin, characterized by marine rift and sag basins flanking the Gawler Craton and Curnamona Province. During the Mesozoic and Cenozoic, some tectonic structures were rejuvenated, while sedimentary cover obscured much of the now flatter terrain. Metamorphic facies in the region vary, with the Gawler and Curnamona provinces reaching granulite facies, while the Adelaide Superbasin achieved the amphibolite facies. The Gawler Craton contains rocks dating back to approximately 3,150 Ma, while the Curnamona Province contains rocks from 1,720 to 1,550 Ma. These ancient regions have undergone various deformation and metamorphic events but have remained relatively stable since around 1,450 Ma. The Adelaide Superbasin is a large sedimentary system formed during the Neoproterozoic to Cambrian, with distinct provinces. It started as an intracontinental rift system resulting from the breakup of Rodinia and transitioned into a passive margin basin in the southeast and a failed rift in the north. Later uplift and re-instigated rifting led to the deposition of thick Cambrian sediments overlying the Neoproterozoic rocks. Overlying basins include late Palaeozoic to Cenozoic formations, such as the Eromanga Basin and Lake Eyre Basin, which are not part of the assessment region but are adjacent to it.

This Southern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Crustal elements are crustal-scale geological regions primarily based on composite geophysical domains, each of which shows a distinctive pattern of magnetic and gravity anomalies. These elements generally relate to the basement, rather than the sedimentary basins. The South Australian Element comprises the Archean-Mesoproterozoic Gawler Craton and Paleo-Mesoproterozoic Curnamona Province, formed over billions of years through sedimentation, volcanism, magmatism, and metamorphism. The region experienced multiple continental-continent collisions, leading to the formation and breakup of supercontinents like Nuna and Rodinia, along with periods of extensional tectonism. Around 1,400 Ma, both the Gawler Craton and Curnamona Province were cratonised, and during the building of the Rodinia supercontinent (1,300-700 Ma), the present configuration of the region emerged. The area between the Gawler and Curnamona provinces contains Neoproterozoic to Holocene cover, including the Adelaide Superbasin, with the Barossa Complex as its basement, believed to be part of the Kimban Orogen. The breakup of Rodinia in the Neoproterozoic (830-600 Ma) resulted in mafic volcanism and extensional episodes, leading to the formation of the Adelaide Superbasin, characterized by marine rift and sag basins flanking the Gawler Craton and Curnamona Province. During the Mesozoic and Cenozoic, some tectonic structures were rejuvenated, while sedimentary cover obscured much of the now flatter terrain. Metamorphic facies in the region vary, with the Gawler and Curnamona provinces reaching granulite facies, while the Adelaide Superbasin achieved the amphibolite facies. The Gawler Craton contains rocks dating back to approximately 3,150 Ma, while the Curnamona Province contains rocks from 1,720 to 1,550 Ma. These ancient regions have undergone various deformation and metamorphic events but have remained relatively stable since around 1,450 Ma. The Adelaide Superbasin is a large sedimentary system formed during the Neoproterozoic to Cambrian, with distinct provinces. It started as an intracontinental rift system resulting from the breakup of Rodinia and transitioned into a passive margin basin in the southeast and a failed rift in the north. Later uplift and re-instigated rifting led to the deposition of thick Cambrian sediments overlying the Neoproterozoic rocks. Overlying basins include late Palaeozoic to Cenozoic formations, such as the Eromanga Basin and Lake Eyre Basin, which are not part of the assessment region but are adjacent to it.

This Southern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Crustal elements are crustal-scale geological regions primarily based on composite geophysical domains, each of which shows a distinctive pattern of magnetic and gravity anomalies. These elements generally relate to the basement, rather than the sedimentary basins. The South Australian Element comprises the Archean-Mesoproterozoic Gawler Craton and Paleo-Mesoproterozoic Curnamona Province, formed over billions of years through sedimentation, volcanism, magmatism, and metamorphism. The region experienced multiple continental-continent collisions, leading to the formation and breakup of supercontinents like Nuna and Rodinia, along with periods of extensional tectonism. Around 1,400 Ma, both the Gawler Craton and Curnamona Province were cratonised, and during the building of the Rodinia supercontinent (1,300-700 Ma), the present configuration of the region emerged. The area between the Gawler and Curnamona provinces contains Neoproterozoic to Holocene cover, including the Adelaide Superbasin, with the Barossa Complex as its basement, believed to be part of the Kimban Orogen. The breakup of Rodinia in the Neoproterozoic (830-600 Ma) resulted in mafic volcanism and extensional episodes, leading to the formation of the Adelaide Superbasin, characterized by marine rift and sag basins flanking the Gawler Craton and Curnamona Province. During the Mesozoic and Cenozoic, some tectonic structures were rejuvenated, while sedimentary cover obscured much of the now flatter terrain. Metamorphic facies in the region vary, with the Gawler and Curnamona provinces reaching granulite facies, while the Adelaide Superbasin achieved the amphibolite facies. The Gawler Craton contains rocks dating back to approximately 3,150 Ma, while the Curnamona Province contains rocks from 1,720 to 1,550 Ma. These ancient regions have undergone various deformation and metamorphic events but have remained relatively stable since around 1,450 Ma. The Adelaide Superbasin is a large sedimentary system formed during the Neoproterozoic to Cambrian, with distinct provinces. It started as an intracontinental rift system resulting from the breakup of Rodinia and transitioned into a passive margin basin in the southeast and a failed rift in the north. Later uplift and re-instigated rifting led to the deposition of thick Cambrian sediments overlying the Neoproterozoic rocks. Overlying basins include late Palaeozoic to Cenozoic formations, such as the Eromanga Basin and Lake Eyre Basin, which are not part of the assessment region but are adjacent to it.

This South Australian Gulf and Yorke Cenozoic Basins dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The South Australian Gulf and Yorke Cenozoic basins consist of eleven separate basins with similar sediments. These relatively small to moderate-sized basins overlies older rocks from the Permian, Cambrian, or Precambrian periods and are often bounded by north-trending faults or basement highs. The largest basins, Torrens, Pirie, and Saint Vincent, share boundaries. The Torrens and Pirie basins are fault-bounded structural depressions linked to the Torrens Hinge Zone, while the Saint Vincent basin is a fault-bounded intra-cratonic graben. Smaller isolated basins include Carribie and Para Wurlie near the Yorke Peninsula, and Willochra and Walloway in the southern Flinders Ranges. The Barossa Basin, Hindmarsh Tiers, Myponga, and Meadows basins are in the Adelaide region. These basins resulted from tectonic movements during the Eocene Australian-Antarctic separation, with many forming in the late Oligocene. Sediment deposition occurred during the Oligocene to Holocene, with various environments influenced by marine transgressions and regressions. The well-studied Saint Vincent Basin contains diverse sediments deposited in fluvial, alluvial, deltaic, swamp, marine, littoral, beach, and colluvial settings, with over 30 major shoreline migrations. Eocene deposition formed fluvio-deltaic lignite and sand deposits, before transitioning to deeper marine settings. The Oligocene and Miocene saw limestone, calcarenite, and clay deposition, overlain by Pliocene marine sands and limestones. The uppermost sequences include interbedded Pliocene to Pleistocene limestone, sand, gravel, and clay, as well as Pleistocene clay with minor sand lenses, and Holocene to modern coastal deposits. The sediment thickness varies from less than 50 m to approximately 600 m, with the Saint Vincent Basin having the most substantial infill. Some basins were previously connected to the Saint Vincent Basin's marine depositional systems but later separated due to tectonic movements.