This dataset contains Sea Surface Temperature (SST) underway observations collected on trips of the Research Vessel RV Linnaeus (callsign: VHW6005) from its occasional trips within 200 nm from Hillarys Boat Harbour, WA. Bulk SST is processed from SBE38 calibrated digital oceanographic thermometer and SBE45 MicroTSG. The depth of water intake is 0.8 m. The data are quality controlled by the Bureau of Meteorology and provided to eMII.

1999 to 2023 surface temperature and salinity measured along the track of commercial ships, mostly between Montreal (Quebec) and St. John's (Newfoundland). Monitoring of surface water conditions in the Estuary and Gulf of St. Lawrence is carried out with different complementary methods such as thermosalinographs (TSG) installed on commercial ships. These ships are sailing all year long from Montreal to St. John’s, one round trip per week, and are sampling water near the surface (3 to 8 meters deep) to determine the temperature and salinity all along the route. Purpose The recorded data are used as input to numerical forecasting models for sea ice conditions and as a monitoring tool for the Gulf of St. Lawrence. Annual reports are available at the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm). Galbraith, P.S., Chassé, J., Caverhill, C., Nicot, P., Gilbert, D., Lefaivre, D. and Lafleur, C. 2018. Physical Oceanographic Conditions in the Gulf of St. Lawrence during 2017. DFO Can. Sci. Advis. Sec. Res. Doc. 2018/050. v + 79 p.

The Global Temperature-Salinity Profile Programme (GTSPP) develops and maintains a global ocean temperature and salinity resource with data that are both up-to-date and of the highest quality. It is a joint World Meteorological Organization (WMO) and Intergovernmental Oceanographic Commission (IOC) program. It includes data from XBTs, CTDs, moored and drifting buoys, and PALACE floats. For information about organizations contributing data to GTSPP, see http://gosic.org/goos/GTSPP-data-flow.htm . The U.S. National Oceanographic Data Center (NODC) maintains the GTSPP Continuously Managed Data Base and releases new 'best-copy' data once per month. WARNING: This dataset has a *lot* of data. If you request too much data, your request will fail. * If you don't specify a longitude and latitude bounding box, don't request more than a month's data at a time. * If you do specify a longitude and latitude bounding box, you can request data for a proportionally longer time period. Requesting data for a specific station_id may be slow, but it works. *** This ERDDAP dataset has data for the entire world for all available times (currently, up to and including the July 2022 data) but is a subset of the original NODC 'best-copy' data. It only includes data where the quality flags indicate the data is 1=CORRECT, 2=PROBABLY GOOD, or 5=MODIFIED. It does not include some of the metadata, any of the history data, or any of the quality flag data of the original dataset. You can always get the complete, up-to-date dataset (and additional, near-real-time data) from the source: https://www.nodc.noaa.gov/GTSPP/ . Specific differences are: * Profiles with a position_quality_flag or a time_quality_flag other than 1|2|5 were removed. * Rows with a depth (z) value less than -0.4 or greater than 10000 or a z_variable_quality_flag other than 1|2|5 were removed. * Temperature values less than -4 or greater than 40 or with a temperature_quality_flag other than 1|2|5 were set to NaN. * Salinity values less than 0 or greater than 41 or with a salinity_quality_flag other than 1|2|5 were set to NaN. * Time values were converted from "days since 1900-01-01 00:00:00" to "seconds since 1970-01-01T00:00:00". See the Quality Flag definitions on page 5 and "Table 2.1: Global Impossible Parameter Values" on page 61 of https://www.nodc.noaa.gov/GTSPP/document/qcmans/GTSPP_RT_QC_Manual_20090916.pdf . The Quality Flag definitions are also at https://www.nodc.noaa.gov/GTSPP/document/qcmans/qcflags.htm .

Nine samples were collected at Georges River using a conductivity-temperature-depth (CTD) device on the 11th October 1985, for collection of salinity data.

Nine samples were collected at Georges River using a conductivity-temperature-depth (CTD) device on the 17th October 1985, for collection of salinity data.

Sea level and meteorological data collected during various projects in Spencer Gulf and Gulf St Vincent, South Australia since 1990.

이 데이터셋의 설명이 없습니다

This dataset contains Sea Surface Temperature (SST) underway observations collected on trips of the Merchant Vessel Fantasea Wonder (callsign: VJQ7467) between Shute Harbour and Hardy Reef. Data available from the vessel are skin and bulk SST from two types of sensors. Enhancement of Measurements on Ships of Opportunity (SOOP)-Sea Surface Temperature (SST) aims to supply near real-time SST data (within 24 hours) from SOOPs and research vessels in the Australian region. Observed data are retrieved from the vessel once a day around 6pm and quality controlled at the Bureau of Meteorology. A daily file of 1-minute averages of the observations is generated around 0900 UTC and provided to eMII.

A total of 30 conductivity-temperature-depth (CTD) stations were collected on the 15th October 1994, from the Adelaide River, for collection of water temperature and salinity data.