## **Abstract** This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. Contains boundary and attribute information for parcels of public, private and Aboriginal lands in Australia. Data are sourced primarly from government gazette notices, cadastral maps and plans. A nominal scale of around 1:5 million and a minimum 50 square kilometre threshold limit for land parcels was used in the generalisation of this product from the National Public and Aboriginal Lands data. Data is suitable for GIS applications. This map shows public and private land tenure, including Indigenous land for the whole of Australia at a scale of 1:4.7 million. The land tenure boundaries depicted on this map generally define broadly classified areas greater than 50 square kilometres. Indigenous land areas between 0.1 and 100 square kilometres are shown more comprehensively by symbols. The information on this map is complemented by statistical tables giving the total area of the land tenure categories for each State and Territory. This map is also available as free vector GIS data, ArcInfo Export, ArcView Shapefile and MapInfo mid/mif. Please direct any corrections or feedback on this map to mapfeedback@ga.gov.au. Product Specifications: Coverage: Australia Currency: Mid 1993 Coordinates: Geographical Datum: AGD66 Projection: Simple Conic on two standard parallels 18S and 36S Medium: Printed map (flat and folded); ## **Dataset History** Data was primarily sourced from Geoscience Australia's National Public and Aboriginal Lands data which contains data from State and Commonwealth Government gazettes. The Commonwealth Aboriginal and Torres Strait Islander Commission and State Government departments provided information on Aboriginal lands not gazetted. Other information was obtained from published maps and Geoscience Australia's National Topographic Mapping Series (NTMS). Further information can be found at http://www.ga.gov.au/metadata-gateway/metadata/record/42340/ ## **Dataset Citation** Geoscience Australia (2004) Australian Land Tenure 1993 - Geoscience Australia. Bioregional Assessment Source Dataset. Viewed 05 July 2017, http://data.bioregionalassessments.gov.au/dataset/d51a641a-df86-4b10-985a-8714b570386a.

This vector dataset is a compilation of land use data for Western Australia, as at August 2018. It has been derived from various vector datasets with attribution relevant to land use in Western Australia. The date of mapping (2008 to 2018) and scale of mapping (1:5 000 to 1:250 000) vary, reflecting the source data, capture date and scale. The data shows a single dominant land use for a given area, based on the primary management objective of the land manager. As a seamless spatial dataset for Western Australia, it can be used to identify, map and analyse high level land use categories (such as nature conservation, dryland cropping and irrigated horticulture) and more specific land use categories (such as aquaculture and tree fruits) including some commodities (such as bananas). These categories can be extracted or combined with other spatial datasets to provide new insights and analysis concerning land use in Western Australia. Land use is classified according to the Australian Land Use and Management (ALUM) Classification version 8, a three-tiered hierarchical structure. There are five primary classes, identified in order of increasing levels of intervention or potential impact on the natural landscape. Water is included separately as a sixth primary class. Primary and secondary levels relate to the principal land use. Tertiary classes may include additional information on commodity groups, specific commodities, land management practices or vegetation information. The primary, secondary and tertiary codes work together to provide increasing levels of detail about the land use. Land may be subject to a number of concurrent land uses. For example, while the main management objective of a multiple-use production forest may be timber production, it may also provide conservation, recreation, grazing and water catchment land uses. In these cases, production forestry is commonly identified in the ALUM code as the prime land use. The operational scales of the mapping vary according to the intensity of land use activities and landscape context. Scales range from 1:5 000 and 1:25 000 for irrigated and peri-urban areas, to 1:100 000 for broadacre cropping regions and 1:250 000 for the semi-arid and arid pastoral zone. The scale of mapping generally reflects the intensity of land use. This update refreshes the entire state of Western Australia to ALUM v8.

This layer contains information on Clause 21, 27 and 28, Improvement Plans, Planning Control Areas and Redevelopment Scheme and Act Areas. This is to be used in conjunction with the Region Scheme Zones and Reserves. © State of Western Australian 2025. Department of Planning, Lands and Heritage.

The Tasmanian land use 2015 spatial data set is produced at catchment scale which is undertaken through the Australian Collaborative Land Use and Management Program (ACLUMP) using standards set out in the 'Guidelines for land use mapping in Australia: principals, procedures and definitions, 4th edition 2011' and âAddendum to the Guidelines for land use mapping in Australia: principles, procedures and definition, 4th Editionâ. Land use is classified by its prime use using a hierarchical structure, Australian Land Use and Management Classification (ALUMC) v8, which allows attribution as broad classes to individual commodities. This produces nationally consistent land use mapping to plan for and achieve productive agriculture and prosperous regional communities. Land use information shows how we use the landscape, whether that is for food production, forestry, nature conservation, water storage or urban development. The data set has been derived through spatial analysis of ancillary data sets, interpretation from imagery (Google Earth, State Orthophoto and Landsat composite) and expert knowledge through stakeholder engagements. The development of a modelling process to create the data set allows a repeatable process for future iterations of land use mapping. The land use mapping coverage is available for mixed dates at a scale that varies according to the intensity of land use activities and landscape context. This iteration of land use mapping is for improved biosecurity outcomes to improve biosecurity risk management and emergency disease preparedness through updated land use mapping of horticulture and intensive animal production. Land use mapping is completed to the secondary and tertiary level with commodity information for priority land use classes focusing on dairy grazing, sheds and yards, vineyards, stock aggregation points and nurseries. Australian Land Use and Management Classification (ALUMC) v8 comprises of five primary classes, identified in order of increasing levels of intervention or potential impact on the natural landscape. Water is included separately as a sixth primary class. Primary and secondary levels relate to the principal land use. Tertiary classes may include additional information on commodity groups, specific commodities, land management practices or vegetation information. The primary, secondary and tertiary codes work together to provide increasing levels of detail about the land use. Land may be subject to a number of concurrent land uses. For example, while the main management objective of a multiple-use production forest may be timber production, it may also provide conservation, recreation, grazing and water catchment land uses. In these cases, production forestry is commonly identified in the ALUM code as the prime land use. The primary classes of land use in the ALUM Classification are: 1. Conservation and natural environments - land used primarily for conservation purposes, based on maintaining the essentially natural ecosystems present 2. Production from relatively natural environments - land used mainly for primary production with limited change to the native vegetation 3. Production from dryland agriculture and plantations - land used mainly for primary production based on dryland farming systems 4. Production from irrigated agriculture and plantations - land used mostly for primary production based on irrigated farming 5. Intensive uses - land subject to extensive modification, generally in association with closer residential settlement, commercial or industrial uses 6. Water - water features (water is regarded as an essential aspect of the classification, even though it is primarily a land cover type, not a land use)