This dataset has been superseded by https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/0145df96-3847-474b-8b63-a66f0e03ff54 (Victorian Statewide Marine Habitat Map 2023). The Victorian Benthic Habitats - Gippsland Lakes (CBICS) is a synthesis of all existing benthic habitat characterisations of the Gippsland Lakes Region which have been reclassified to conform to the Combined Biotope Classification Scheme (CBiCS). The study area for this layer is defined as Jack Smith Lake in the west to Mallacoota in the east.

This dataset has been superseded by https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/0145df96-3847-474b-8b63-a66f0e03ff54 (Victorian Statewide Marine Habitat Map 2023). The Victorian seabed habitat map documents the distribution of broad benthic habitat types in Victorian Coastal Waters to the State’s 3 nautical mile jurisdictional limit. The map was created using a top-down modelling process whereby habitat descriptors were assigned using seafloor structure and biological information derived from multibeam sonar (Victorian Marine Habitat Mapping Project), bathymetric LiDAR (Future Coasts program) and observations from underwater video. Identification of benthic biota, to the lowest discernible taxonomic level, and substrate characteristics were recorded according to the Victorian Towed Video Classification scheme (Ierodiaconou et al. 2007).

This dataset has been superseded by https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/0145df96-3847-474b-8b63-a66f0e03ff54 (Victorian Statewide Marine Habitat Map 2023). The Victorian Benthic Habitats - Western Port Bay (CBICS) is a synthesis of all existing benthic habitat characterisations of the embayment which have been reclassified to conform to the Combined Biotope Classification Scheme (CBiCS). Base layers for the synthesised dataset were sourced from data provided by: Marine and Freshwater Resources Institute, Queenscliff, Victoria Institute for Sustainability and Innovation, Victoria University, Melbourne. Parks Victoria, Victorian Government Deakin University, Victoria Department of Environment, Land, Water and Planning, Victorian Government

This dataset has been superseded by https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/0145df96-3847-474b-8b63-a66f0e03ff54 (Victorian Statewide Marine Habitat Map 2023). The Victorian Benthic Habitats - Port Phillip Bay (CBICS) is a synthesis of all existing benthic habitat characterisations of the embayment which have been reclassified to conform to the Combined Biotope Classification Scheme (CBiCS). Base information for the synthesised dataset were sourced from data provided by: Marine and Freshwater Resources Institute, Queenscliff, Victoria Institute for Sustainability and Innovation, Victoria University, Melbourne. Parks Victoria, Victorian Government Deakin University, Victoria Department of Environment, Land, Water and Planning, Victorian Government

The Victorian seabed habitat map documents the distribution of broad benthic habitat types in Victorian Coastal Waters to the State’s 3 nautical mile jurisdictional limit. The map was created using a top-down modelling process whereby habitat descriptors were assigned using seafloor structure and biological information derived from multibeam sonar (Victorian Marine Habitat Mapping Project), bathymetric LiDAR (Future Coasts program) and observations from underwater video. Identification of benthic biota, to the lowest discernible taxonomic level, and substrate characteristics were recorded according to the Victorian Towed Video Classification scheme (Ierodiaconou et al. 2007).

This record describes a single aggregated dataset of the geomorphic habitat environment (facies) for Australia's 7 states and territories: New South Wales, Victoria, Tasmania, Queensland, Northern Territory, South Australia, Western Australia. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. For the New South Wales region, 134 coastal waterways are described. Most of the estuaries of New South Wales are under intense land use pressure with approximately 80% of the State's population living near an estuary (NSW Dept of Land and Water Conservation) For the Victorian region, 54 coastal waterways are described. Most of the 54 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Tasmanian region, 88 coastal waterways are described. The majority of near pristine estuaries in Tasmania are located in the south and west of the State and on Cape Barren Island, according to the Department of Primary Industries, Water and Environment. For the Queensland region, 213 coastal waterways are described. Southern and central Great Barrier Reef lagoon coasts have a broad spectrum of river, tide and wave- dominated estuaries. For the Northern Territory region, 63 coastal waterways are described. Estuaries on the northern Arnhem Land, Gulf of Carpentaria coasts are predominantly tide-dominated estuaries, which vary greatly in size and floodplain characteristics. For the South Australia region, 36 coastal waterways are described. Most of the 36 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Western Australia region, 103 coastal waterways are described. Western Australia has a diverse range of Estuaries due to different climates. Ranging from mostly "near pristine" and tide influenced estuaries in the north to "near pristine" wave dominated estuaries in the southwest region.

This record describes a single aggregated dataset of the geomorphic habitat environment (facies) for Australia's 7 states and territories: New South Wales, Victoria, Tasmania, Queensland, Northern Territory, South Australia, Western Australia. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. For the New South Wales region, 134 coastal waterways are described. Most of the estuaries of New South Wales are under intense land use pressure with approximately 80% of the State's population living near an estuary (NSW Dept of Land and Water Conservation) For the Victorian region, 54 coastal waterways are described. Most of the 54 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Tasmanian region, 88 coastal waterways are described. The majority of near pristine estuaries in Tasmania are located in the south and west of the State and on Cape Barren Island, according to the Department of Primary Industries, Water and Environment. For the Queensland region, 213 coastal waterways are described. Southern and central Great Barrier Reef lagoon coasts have a broad spectrum of river, tide and wave- dominated estuaries. For the Northern Territory region, 63 coastal waterways are described. Estuaries on the northern Arnhem Land, Gulf of Carpentaria coasts are predominantly tide-dominated estuaries, which vary greatly in size and floodplain characteristics. For the South Australia region, 36 coastal waterways are described. Most of the 36 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition. For the Western Australia region, 103 coastal waterways are described. Western Australia has a diverse range of Estuaries due to different climates. Ranging from mostly "near pristine" and tide influenced estuaries in the north to "near pristine" wave dominated estuaries in the southwest region.

This dataset summarises benthic surveys in Yanyuwa Sea Country into 3 GIS shapefiles. (1) A point (site) shapefile describes seagrass presence/absence at 3248 sites surveyed by small vessel and helicopter. (2) The meadow shapefile describes attributes of 180 intertidal seagrass meadows. (3) The interpolation GeoTiff describes variation in seagrass biomass across the seagrass meadows. This project is a partnership between li-Anthawirriyarra rangers, Charles Darwin University, James Cook University, and Mabunji Aboriginal Resource Indigenous Corporation to map the intertidal habitats of the Yanyuwa Indigenous Protected Area (IPA), an area of profound importance to the Marra and Yanyuwa people and to the marine ecosystem of the Gulf of Carpentaria. Benthic habitat maps of Yanyuwa Country were produced, with a focus on seagrass. Report reference: Groom R, Carter A, Collier C, Firby L, Evans S, Barrett S, Hoffmann L, van de Wetering C, Shepherd L, Evans S, Anderson S. (2023) Mapping Critical Habitat in Yanyuwa Sea Country. Report to the National Environmental Science Program. Charles Darwin University, pp. 40. Available at: https://www.nespmarinecoastal.edu.au/wp-content/uploads/2023/07/NESP-MaC-Hub-Project-1.12_Groom-et-al-FINAL-REPORT.pdf Methods: The sampling methods used to study, describe and monitor seagrass meadows were developed by the TropWATER Seagrass Group and tailored to the location and habitat surveyed; these are described in detail in the relevant publications (https://research.jcu.edu.au/tropwater). Geographic Information System (GIS) All survey data were entered into a Geographic Information System (GIS) developed for Torres Strait using ArcGIS 10.8. Rectified colour satellite imagery of Yanyuwa Sea Country (Source: Allen Coral Atlas and ESRI), field notes and aerial photographs taken from the helicopter during surveys were used to identify geographical features, such as reef tops, channels and deep-water drop-offs, to assist in determining seagrass meadow boundaries. Three GIS layers were created to describe spatial features of the region: a site layer, seagrass meadow layer, and a seagrass biomass interpolation layer. Seagrass site layer This layer contains information on data collected at assessment sites. This layer includes: 1. Temporal survey details – Survey date; 2. Spatial position - Latitude/longitude; 3. Survey location; 4. Seagrass information including presence/absence of seagrass, above-ground biomass (total and for each species), percent cover of seagrass at each site and whether individual species were present/absent at a site; 5. Benthic macro-invertebrate information including the percent cover of hard coral, soft coral, sponges and other benthic macro invertebrates (e.g. ascidian, clam) at a site; 6. Algae information including percent cover of algae at a site and percent contribution of algae functional groups to algae cover at a site; 7. Open substrate – the percent cover of the site that had no flora or habitat forming benthic invertebrates present; 8. Dominant sediment type - Sediment type based on grain size visual assessment or deck descriptions. 9. Survey method and vessel 10. Relevant comments and presence/absence of megafauna and animals of interest (dugong, turtle, dolphin, evidence of dugong feeding trails); 11. Data custodians. Seagrass meadow layer Seagrass presence/absence site data, mapping sites, field notes, and satellite imagery were used to construct meadow boundaries in ArcGIS®. The meadow (polygon) layer provides summary information for all sites within each seagrass meadow, including: 1. Temporal survey details – Survey month and year as individual columns and the survey date (the date range the survey took place); 2. Spatial survey details – Survey location, meadow identification number that identifies the reef name and the meadow number. This allows individual meadows to be compared among years; 3. Survey method; 4. Meadow depth for subtidal meadows. Intertidal: meadow

Marine benthic habitat data for Tasmanian coastal waters from the LWM (Low water mark) to 40 metres in depth or 1.5 kms from shore. See 'Lineage' section of this record for full methodology and data dictionary. This data is also available via the Seamap Australia National Benthic Habitat Layer - a nationally consolidated benthic habitat map. https://metadata.imas.utas.edu.au/geonetwork/srv/eng/catalog.search#/metadata/4739e4b0-4dba-4ec5-b658-02c09f27ab9a

Point data collected from video drops identifying benthic habitats such as seagrass, macroalgae and reef, collected during field work in 2007 to 2011. Used to support the Benthic Habitat Mapping project undertaken by DENR to map the nearshore benthic habitats of South Australia.