This Perth Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Perth Basin is a complex geological region extending along Australia's southwest margin for about 1,300 km. It comprises sub-basins, troughs, terraces, and shelves, hosting sedimentary rocks with coal, oil, gas, and significant groundwater resources. Off the coast of Western Australia, it reaches depths of up to 4,500 m, while its onshore part extends up to 90 km inland. The basin is bounded by the Yilgarn Craton to the east, and the Carnarvon and Bremer basins to the north and south. The basin's history involves two main rifting phases in the Permian and Late Jurassic to Early Cretaceous, creating 15 sub-basins with varying sedimentary thickness due to compartmentalization and fault reactivation. The sedimentary succession mainly comprises fluviatile Permian to Early Cretaceous rocks over Archean and Proterozoic basement blocks. Differences exist between northern and southern sequences, with the south being continental and the north featuring marine deposits. During the Permian, faulting and clastic sedimentation dominated, with marine transgressions in the north and continental rocks in the south. The Triassic saw a similar pattern, with the southern succession being continental and the northern succession showing marine deposits. The Kockatea Shale became a primary hydrocarbon source. The Jurassic period witnessed marine incursions in the central basin, while the Late Jurassic experienced sea level regression and deposition of the Yarragadee Formation. The Cretaceous saw the formation of the Early Cretaceous Parmelia Group due to heavy tectonic activity. The southern basin had a marine transgression leading to the Warnbro Group's deposition with valuable groundwater resources. Post-Cretaceous, Cenozoic deposits covered the basin with varying thicknesses. Overall, the Perth Basin's geological history reveals a diverse sedimentary record with economic and resource significance.

This South Australian Gulf and Yorke Cenozoic Basins dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The South Australian Gulf and Yorke Cenozoic basins consist of eleven separate basins with similar sediments. These relatively small to moderate-sized basins overlies older rocks from the Permian, Cambrian, or Precambrian periods and are often bounded by north-trending faults or basement highs. The largest basins, Torrens, Pirie, and Saint Vincent, share boundaries. The Torrens and Pirie basins are fault-bounded structural depressions linked to the Torrens Hinge Zone, while the Saint Vincent basin is a fault-bounded intra-cratonic graben. Smaller isolated basins include Carribie and Para Wurlie near the Yorke Peninsula, and Willochra and Walloway in the southern Flinders Ranges. The Barossa Basin, Hindmarsh Tiers, Myponga, and Meadows basins are in the Adelaide region. These basins resulted from tectonic movements during the Eocene Australian-Antarctic separation, with many forming in the late Oligocene. Sediment deposition occurred during the Oligocene to Holocene, with various environments influenced by marine transgressions and regressions. The well-studied Saint Vincent Basin contains diverse sediments deposited in fluvial, alluvial, deltaic, swamp, marine, littoral, beach, and colluvial settings, with over 30 major shoreline migrations. Eocene deposition formed fluvio-deltaic lignite and sand deposits, before transitioning to deeper marine settings. The Oligocene and Miocene saw limestone, calcarenite, and clay deposition, overlain by Pliocene marine sands and limestones. The uppermost sequences include interbedded Pliocene to Pleistocene limestone, sand, gravel, and clay, as well as Pleistocene clay with minor sand lenses, and Holocene to modern coastal deposits. The sediment thickness varies from less than 50 m to approximately 600 m, with the Saint Vincent Basin having the most substantial infill. Some basins were previously connected to the Saint Vincent Basin's marine depositional systems but later separated due to tectonic movements.

This South Australian Gulf and Yorke Cenozoic Basins dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The South Australian Gulf and Yorke Cenozoic basins consist of eleven separate basins with similar sediments. These relatively small to moderate-sized basins overlies older rocks from the Permian, Cambrian, or Precambrian periods and are often bounded by north-trending faults or basement highs. The largest basins, Torrens, Pirie, and Saint Vincent, share boundaries. The Torrens and Pirie basins are fault-bounded structural depressions linked to the Torrens Hinge Zone, while the Saint Vincent basin is a fault-bounded intra-cratonic graben. Smaller isolated basins include Carribie and Para Wurlie near the Yorke Peninsula, and Willochra and Walloway in the southern Flinders Ranges. The Barossa Basin, Hindmarsh Tiers, Myponga, and Meadows basins are in the Adelaide region. These basins resulted from tectonic movements during the Eocene Australian-Antarctic separation, with many forming in the late Oligocene. Sediment deposition occurred during the Oligocene to Holocene, with various environments influenced by marine transgressions and regressions. The well-studied Saint Vincent Basin contains diverse sediments deposited in fluvial, alluvial, deltaic, swamp, marine, littoral, beach, and colluvial settings, with over 30 major shoreline migrations. Eocene deposition formed fluvio-deltaic lignite and sand deposits, before transitioning to deeper marine settings. The Oligocene and Miocene saw limestone, calcarenite, and clay deposition, overlain by Pliocene marine sands and limestones. The uppermost sequences include interbedded Pliocene to Pleistocene limestone, sand, gravel, and clay, as well as Pleistocene clay with minor sand lenses, and Holocene to modern coastal deposits. The sediment thickness varies from less than 50 m to approximately 600 m, with the Saint Vincent Basin having the most substantial infill. Some basins were previously connected to the Saint Vincent Basin's marine depositional systems but later separated due to tectonic movements.

This Tasmania Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Late Carboniferous to Late Triassic Tasmania Basin covers approximately 30,000 square kilometres of onshore Tasmania. The basin contains up to 1500 m of mostly flat-lying sedimentary rocks, and these are divided into two distinct lithostratigraphic units, the Lower and the Upper Parmeener Supergroup. The Lower Parmeener Supergroup comprises Late Carboniferous to Permian rocks that mainly formed in marine environments. The most common rock types in this unit are mudstone, siltstone and sandstone, with less common limestone, conglomerate, coal, oil shale and tillite. The Upper Parmeener Supergroup consists predominantly of non-marine rocks, typically formed in fluvial and lacustrine environments. Common rock types include sandstone, siltstone, mudstone and minor basalt layers. Post-deposition the rocks of the Parmeener Supergroup experienced several major geological events, including the widespread intrusion of tholeiitic dolerite magma during the Middle Jurassic.

This Tasmania Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Late Carboniferous to Late Triassic Tasmania Basin covers approximately 30,000 square kilometres of onshore Tasmania. The basin contains up to 1500 m of mostly flat-lying sedimentary rocks, and these are divided into two distinct lithostratigraphic units, the Lower and the Upper Parmeener Supergroup. The Lower Parmeener Supergroup comprises Late Carboniferous to Permian rocks that mainly formed in marine environments. The most common rock types in this unit are mudstone, siltstone and sandstone, with less common limestone, conglomerate, coal, oil shale and tillite. The Upper Parmeener Supergroup consists predominantly of non-marine rocks, typically formed in fluvial and lacustrine environments. Common rock types include sandstone, siltstone, mudstone and minor basalt layers. Post-deposition the rocks of the Parmeener Supergroup experienced several major geological events, including the widespread intrusion of tholeiitic dolerite magma during the Middle Jurassic.

This Amadeus Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Amadeus Basin is a sedimentary basin in central Australia that spans from the Neoproterozoic to Late Devonian, potentially Early Carboniferous, periods. It contains clastic, carbonate, and evaporitic sedimentary rocks, with a total thickness of 6,000 m to 14,000 m. The Neoproterozoic section alone is up to 3,000 m thick and is divided into four super-sequences separated by major unconformities. The basin is an active hydrocarbon province, with ongoing oil and gas production and the potential for further discoveries. Several key petroleum source rock units have been identified in the Amadeus Basin. The Gillen Formation, found in the northeast, consists of marine black shale, dolostone, sandstone, and evaporite, reaching a maximum thickness of 850 m. The Loves Creek Formation comprises deep water grainstone and mudstone overlain by stromatolite-bearing grainstone and dolostone, with a thickness of up to 500 m. The Johnnys Creek Formation is a unit composed of red bed and dolomitic limestone or dolostone, along with siltstone and sandstone, up to 400 m thick. The Inindia beds consist of sandstone, siltstone, chert, jasper, tillite, and dolostone, with a maximum thickness of 2,000 m and were deposited in shallow marine conditions. The Aralka Formation is a siltstone and shale unit with two members, the Ringwood Member and the Limbla Member, reaching a thickness of up to 1,000 m. The Pertatataka Formation is a turbiditic red and green siltstone and shale unit, along with minor feldspathic sandstone, deposited in a deep marine or marine shelf environment, typically about 350 m thick but up to 1,400 m thick at certain locations. The Winnall Group is a succession of sandstone and siltstone, with a maximum thickness of 2,134 m. The Chandler Formation is a poorly exposed unit consisting of halite, foetid carbonate mudstone, shale, and siltstone, deposited in a shallow marine environment, with halite deposits reaching thicknesses of 230 m to 450 m. The Giles Creek Dolostone is a carbonate and siltstone unit, with minor sandstone, deposited in a shallow-marine environment. The Horn Valley Siltstone is a thinly bedded shale and siltstone, with nodular limestone and sandy phosphatic and glauconitic interbeds, serving as the primary hydrocarbon source rock in the basin. Lastly, the Stairway Sandstone is 544 m thick and divided into three subunits, consisting of quartzitic sandstone, black shale, siltstone, mudstone, and phosphorites.

This Amadeus Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Amadeus Basin is a sedimentary basin in central Australia that spans from the Neoproterozoic to Late Devonian, potentially Early Carboniferous, periods. It contains clastic, carbonate, and evaporitic sedimentary rocks, with a total thickness of 6,000 m to 14,000 m. The Neoproterozoic section alone is up to 3,000 m thick and is divided into four super-sequences separated by major unconformities. The basin is an active hydrocarbon province, with ongoing oil and gas production and the potential for further discoveries. Several key petroleum source rock units have been identified in the Amadeus Basin. The Gillen Formation, found in the northeast, consists of marine black shale, dolostone, sandstone, and evaporite, reaching a maximum thickness of 850 m. The Loves Creek Formation comprises deep water grainstone and mudstone overlain by stromatolite-bearing grainstone and dolostone, with a thickness of up to 500 m. The Johnnys Creek Formation is a unit composed of red bed and dolomitic limestone or dolostone, along with siltstone and sandstone, up to 400 m thick. The Inindia beds consist of sandstone, siltstone, chert, jasper, tillite, and dolostone, with a maximum thickness of 2,000 m and were deposited in shallow marine conditions. The Aralka Formation is a siltstone and shale unit with two members, the Ringwood Member and the Limbla Member, reaching a thickness of up to 1,000 m. The Pertatataka Formation is a turbiditic red and green siltstone and shale unit, along with minor feldspathic sandstone, deposited in a deep marine or marine shelf environment, typically about 350 m thick but up to 1,400 m thick at certain locations. The Winnall Group is a succession of sandstone and siltstone, with a maximum thickness of 2,134 m. The Chandler Formation is a poorly exposed unit consisting of halite, foetid carbonate mudstone, shale, and siltstone, deposited in a shallow marine environment, with halite deposits reaching thicknesses of 230 m to 450 m. The Giles Creek Dolostone is a carbonate and siltstone unit, with minor sandstone, deposited in a shallow-marine environment. The Horn Valley Siltstone is a thinly bedded shale and siltstone, with nodular limestone and sandy phosphatic and glauconitic interbeds, serving as the primary hydrocarbon source rock in the basin. Lastly, the Stairway Sandstone is 544 m thick and divided into three subunits, consisting of quartzitic sandstone, black shale, siltstone, mudstone, and phosphorites.

This McArthur Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The McArthur Basin, located in the north-east of the Northern Territory, is a Paleoproterozoic to Mesoproterozoic geological formation containing relatively undisturbed siliclastic and carbonate rocks, as well as minor volcanic and intrusive rocks. These sediments were primarily deposited in shallow marine environments, with some lacustrine and fluvial influences. The basin's thickness is estimated to be around 10,000 m to 12,000 m, potentially reaching 15,000 m in certain areas. It is known for hosting elements of at least two Proterozoic petroleum systems, making it a target for petroleum exploration, especially in the Beetaloo Sub-basin. Researchers have divided the McArthur Basin into five depositional packages based on similarities in age, lithofacies composition, stratigraphic position, and basin-fill geometry. These packages, listed from oldest to youngest, are the Wilton, Favenc, Glyde, Goyder, and Redback packages. The McArthur Basin is part of the broader Proterozoic basin system on the North Australian Craton, bounded by various inliers and extending under sedimentary cover in areas like the Arafura, Georgina, and Carpentaria basins. It is divided into northern and southern sections by the Urapunga Fault Zone, with significant structural features being the Walker Fault Zone in the north and the Batten Fault Zone in the south. The basin's southeastern extension connects with the Isa Superbasin in Queensland, forming the world's largest lead-zinc province. Overall, the McArthur Basin is an essential geological formation with potential petroleum resources, and its division into distinct packages helps in understanding its complex stratigraphy and geological history. Additionally, its connection with other basins contributes to a broader understanding of the region's geological evolution and resource potential.

This Maryborough-Nambour Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Maryborough Basin is a half-graben intracratonic sag basin mainly filled with Early Cretaceous rocks, overlain by up to 100 m of Cenozoic sediments. It adjoins the older Nambour Basin to the south, comprising Triassic to Jurassic rocks. The boundary between the basins has shifted due to changes in sedimentary unit classifications, with the Cretaceous units now restricted to the Maryborough Basin and Jurassic and older units assigned to the Nambour Basin. Both basins are bounded to the west and unconformably overlies older Permian and Triassic rocks in the Gympie Province and Wandilla Province of the New England Orogen. In the south of the Nambour Basin, it partly overlaps with the Triassic Ipswich Basin. The Nambour Basin in the south is primarily composed of the Nambour Formation, with interbedded conglomerate, sandstone, siltstone, shale, and minor coal. Overlying this is the Landsborough Sandstone, a unit with continental, fluviatile sediments and a thickness of up to 450 m. In the north, the Duckinwilla Group contains the Myrtle Creek Sandstone and the Tiaro Coal Measures, which were formerly considered part of the Maryborough Basin but are now associated with the northern Nambour Basin. In contrast, the Maryborough Basin consists of three main Cretaceous units and an upper Cenozoic unit. The Grahams Creek Formation is the deepest, featuring terrestrial volcanic rocks, volcaniclastic sedimentary rocks, and minor pyroclastic rocks. The overlying Maryborough Formation was deposited in a continental environment with subsequent marine incursion and includes mudstone, siltstone, minor sandstone, limestone, conglomerate, and tuff. The upper Cretaceous unit is the Burrum Coal Measures, comprising interbedded sedimentary rocks deposited in fluvial to deltaic environments. The uppermost unit, the Eocene to Miocene Elliott Formation, includes sandstone, siltstone, conglomerate, and shale deposited in fluvial to deltaic environments. Cenozoic sediments overlying the Elliott Formation consist of Quaternary alluvium, coastal deposits, and sand islands like Fraser Island, influenced by eustatic sea level variations. Volcanic deposits and freshwater sediments also occur in some areas. Adjacent basins, such as the Clarence-Moreton Basin and Capricorn Basin, have stratigraphic correlations with the Maryborough Basin. The Oxley Basin lies to the south, overlying the Ipswich Basin. In summary, the Maryborough Basin and the older Nambour Basin exhibit distinct geological characteristics, with varying rock formations, ages, and sedimentary features, contributing to the diverse landscape of the region.

This Bowen Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Bowen Basin is part of the Sydney–Gunnedah–Bowen basin system and contains up to 10,000 m of continental and shallow marine sedimentary rocks, including substantial deposits of black coal. The basin's evolution has been influenced by tectonic processes initiated by the New England Orogen, commencing with a phase of mechanical extension, and later evolving to a back-arc setting associated with a convergent plate margin. Three main phases of basin development have been identified; 1) Early Permian: Characterized by mechanical extension, half-graben development, thick volcanic units and fluvio-lacustrine sediments and coal deposits. 2) Mid Permian: A thermal relaxation event led to the deposition of marine and fluvio-deltaic sediments, ending with a regional unconformity. 3) Late Permian and Triassic: Foreland loading created a foreland basin setting with various depositional environments and sediment types, including included fluvial, marginal marine, deltaic and marine sediments along with some coal deposits in the late Permian, and fluvial and lacustrine sediments in the Triassic. Late Permian peat swamps led to the formation of extensive coal seams dominating the Blackwater Group. In the Triassic, fluvial and lacustrine deposition associated with foreland loading formed the Rewan Formation, Clematis Sandstone Group, and Moolayember Formation. The basin is a significant coal-bearing region with over 100 hydrocarbon accumulations, of which about one third are producing fields. The Surat Basin overlies the southern Bowen Basin and contains varied sedimentary assemblages hosting regional-scale aquifer systems. Cenozoic cover to the Bowen Basin includes a variety of sedimentary and volcanic rock units. Palaeogene and Neogene sediments mainly form discontinuous units across the basin. Three of these units are associated with small eponymous Cenozoic basins (the Duaringa, Emerald and Biloela basins). Unnamed sedimentary cover includes Quaternary alluvium, colluvium, lacustrine and estuarine deposits; Palaeogene-Neogene alluvium, sand plains, and duricrusts. There are also various Cenozoic intraplate volcanics across the Bowen Basin, including central volcanic- and lava-field provinces.