데이터셋 상세
호주
Tide Stations Department of Transport WA (DOT-025)
Tide Stations: Water level observations are in centimetres (unless otherwise stated) and are typically in intervals of 60, 15, 5 or 2 minutes (specified in the header). All measurements are recorded to Australian Western Standard Time and to the local vertical datum as specified in the header (if known). Tide station locations are to GDA2020, however some locations are an approximation only, particularly the historical tide stations and DoT does not provide any warranty as to the accuracy of the information nor as to its reliability.
연관 데이터
tides@msq.qld.gov.au - Gladstone Auckland Point tide gauge—archived interval recordings
공공데이터포털
Archived water level readings recorded at Gladstone Auckland Point using an automatic tide gauge.
DOT Tide Gauge Deployments
공공데이터포털
This point feature class contains the locations of Tide Gaugedeployments across the state of Western Australia. Historic Tide data is held by DOT from Wyndham to Esperance. Tide; AWAC; Wave; Pressure and Current data currently available at the Department of Transport, Fremantle. This data can be ordered at the following link:http://www.transport.wa.gov.au/imarine/historical-tide-and-wave-data.aspAll measurements are recorded to Australian Western Standard Time and to the local vertical datum as specified in the header (if known). Tide station locations are to GDA94, however some locations are an approximation only, particularly the historical tide stations and DoT does not provide any warranty as to the accuracy of the information nor as to its reliability.
opendata@tmr.qld.gov.au - Port Douglas tide gauge—predicted interval data
공공데이터포털
Predicted water level heights at Port Douglas at regular time intervals.
tides@msq.qld.gov.au - Shute Harbour tide gauge—predicted interval data
공공데이터포털
Predicted water level heights at Shute Harbour at regular time intervals.
Tamar sea level data March-August 2018
공공데이터포털
Water level heights were measured every 5 minutes at five station locations in the 70km length Tamar estuary, Tasmania, for six months. Pressure loggers deployed in the water recorded total pressure and the inverse barometer effect was accounted for by two additional pressure loggers deployed above ground within 15km of a station. The data include barometric pressure, water temperature, and water level relative to Australian Height Datum (AHD83). The data captures tidal amplification and asymmetry between ebb and flood tides in the estuary for the purpose of a research project completed in 2018 by Karen Palmer. Based on the Tamar estuary model created for NRM North by BMT WBM Pty Ltd using TUFLOW FV (with permission), a new hydrodynamic model was created and calibrated with observed water levels. Different scenarios of sea level rise and bathymetry change were then simulated to model the effects on tidal amplitude and phase.
tides@msq.qld.gov.au - Bowen tide gauge—predicted interval data
공공데이터포털
Predicted water level heights at Bowen at regular time intervals.
opendata@tmr.qld.gov.au - Burnett Heads tide gauge—predicted interval data
공공데이터포털
Predicted water level heights at Burnett Heads at regular time intervals.
tides@msq.qld.gov.au - Gladstone Auckland Point tide gauge—predicted interval data
공공데이터포털
Predicted water level heights at Gladstone Auckland Point at regular time intervals.
opendata@tmr.qld.gov.au - Abbot Point tide gauge—predicted interval data
공공데이터포털
Predicted water level heights at Abbot Point at regular time intervals.