This dataset presents the dependency rate of the population in small regions of Australia based on the 2016 Census and aggregated following the 2016 edition of the Australian Statistical Geography Standard (ASGS). The data has been provided by The National Centre for Social and Economic Modelling (NATSEM). The dependency rate is the number of people of working age (20-64) divided by the number of people of retirement age (65 and over). All indicators were extracted from the ABS Tablebuilder system using the usual residence profile. For usual residence data, the ABS moves people back to where they live, rather than using the location the data were collected (place of enumeration). Usual residence data is preferred for individual level data because it removes the effect of respondents travelling or holidaying. The treatment of Not Stated data is to exclude them from both the numerator and the denominator. For more information please view the NATSEM Technical Report. Please note: AURIN has spatially enabled the original data provided directly from NATSEM. Where data values are NULL, the data is either unpublished or not applicable mathematically. Methodology between the 2016 NATSEM and 2011 OECD data release may have changed, please refer to the technical report for parity status and specific changes.

This data is SA2 based SEIFA data on The Index of Economic Resources, 2016. Data is based upon 2016 ASGS boundaries. Socio-Economic Indexes for Areas (SEIFA) is an ABS product that ranks areas in Australia according to relative socio-economic advantage and disadvantage. The indexes are based on information from the five-yearly Census of Population and Housing. SEIFA 2016 has been created from Census 2016 data and consists of four indexes: The Index of Relative Socio-economic Disadvantage (IRSD); The Index of Relative Socio-economic Advantage and Disadvantage (IRSAD); The Index of Education and Occupation (IEO); The Index of Economic Resources (IER). Each index is a summary of a different subset of Census variables and focuses on a different aspect of socio-economic advantage and disadvantage. This data is ABS data (catalogue number: 2033.0.55.001) used with permission from the Australian Bureau of Statistics. For more information on this data please visit the Australian Bureau of Statistics.

This dataset presents aggregated values of Investment Income as a category of the estimates of Personal Income for Small Areas ABS release. The data spans over the financial years of 2010-11 to 2014-15 and is aggregated to the 2016 Statistical Area Level 2 (SA2) boundaries. This release presents regional data on the number of income earners, amounts they receive, and the distribution of income for the 2010-11 to 2014-15 financial years. An improved geocoding process has been introduced for this release. As such, previously released estimates for the 2010-11 and 2012-13 financial year have been superseded. The following personal income categories are provided in this census release: Employee Income Own Unincorporated Business Income Investment Income Superannuation Income Other Income (Income not allocatable to any other categories) Total Income (Sum of previous categories) These statistics provide insights into the nature of regional economies and the economic well-being of the people who live there. The data has been sourced from the Australian Taxation Office (ATO) and is presented with the updated 2016 editions of the Australian Statistical Geography Standards (ASGS): Statistical Area Level 2 (SA2); Statistical Area Level 3 (SA3); Statistical Area Level 4 (SA4); Greater Capital City Statistical Area (GCCSA) and Local Government Area (LGA). For more information on the release please visit the Australian Bureau of Statistics. Please note: When interpreting these results, it should be noted that some low income earners, for example those receiving Government pensions and allowances, or those who earned below the tax free threshold, may not be present in the data, as they may not be required to lodge personal tax forms. Other individuals may not lodge a tax return even if required, therefore care should be taken in interpreting the data as well as comparing the data in this publication with other income data produced by the ABS. To minimise the risk of identifying individuals in aggregate statistics, a confidentialisation process called perturbation has been applied to the data. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics while maximising the range of information that can be released. Where data is not available or not for publication, the record has been set to a null value.

This dataset presents aggregated values of Employee Income as a category of the estimates of Personal Income for Small Areas ABS release. The data spans over the financial years of 2010-11 to 2014-15 and is aggregated to the 2016 Statistical Area Level 2 (SA2) boundaries. This release presents regional data on the number of income earners, amounts they receive, and the distribution of income for the 2010-11 to 2014-15 financial years. An improved geocoding process has been introduced for this release. As such, previously released estimates for the 2010-11 and 2012-13 financial year have been superseded. The following personal income categories are provided in this census release: Employee Income Own Unincorporated Business Income Investment Income Superannuation Income Other Income (Income not allocatable to any other categories) Total Income (Sum of previous categories) These statistics provide insights into the nature of regional economies and the economic well-being of the people who live there. The data has been sourced from the Australian Taxation Office (ATO) and is presented with the updated 2016 editions of the Australian Statistical Geography Standards (ASGS): Statistical Area Level 2 (SA2); Statistical Area Level 3 (SA3); Statistical Area Level 4 (SA4); Greater Capital City Statistical Area (GCCSA) and Local Government Area (LGA). For more information on the release please visit the Australian Bureau of Statistics. Please note: When interpreting these results, it should be noted that some low income earners, for example those receiving Government pensions and allowances, or those who earned below the tax free threshold, may not be present in the data, as they may not be required to lodge personal tax forms. Other individuals may not lodge a tax return even if required, therefore care should be taken in interpreting the data as well as comparing the data in this publication with other income data produced by the ABS. To minimise the risk of identifying individuals in aggregate statistics, a confidentialisation process called perturbation has been applied to the data. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics while maximising the range of information that can be released. Where data is not available or not for publication, the record has been set to a null value.

This dataset presents aggregated values of Own Unincorporated Business Income as a category of the estimates of Personal Income for Small Areas ABS release. The data spans over the financial years of 2010-11 to 2014-15 and is aggregated to the 2016 Statistical Area Level 2 (SA2) boundaries. This release presents regional data on the number of income earners, amounts they receive, and the distribution of income for the 2010-11 to 2014-15 financial years. An improved geocoding process has been introduced for this release. As such, previously released estimates for the 2010-11 and 2012-13 financial year have been superseded. The following personal income categories are provided in this census release: Employee Income Own Unincorporated Business Income Investment Income Superannuation Income Other Income (Income not allocatable to any other categories) Total Income (Sum of previous categories) These statistics provide insights into the nature of regional economies and the economic well-being of the people who live there. The data has been sourced from the Australian Taxation Office (ATO) and is presented with the updated 2016 editions of the Australian Statistical Geography Standards (ASGS): Statistical Area Level 2 (SA2); Statistical Area Level 3 (SA3); Statistical Area Level 4 (SA4); Greater Capital City Statistical Area (GCCSA) and Local Government Area (LGA). For more information on the release please visit the Australian Bureau of Statistics. Please note: When interpreting these results, it should be noted that some low income earners, for example those receiving Government pensions and allowances, or those who earned below the tax free threshold, may not be present in the data, as they may not be required to lodge personal tax forms. Other individuals may not lodge a tax return even if required, therefore care should be taken in interpreting the data as well as comparing the data in this publication with other income data produced by the ABS. To minimise the risk of identifying individuals in aggregate statistics, a confidentialisation process called perturbation has been applied to the data. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics while maximising the range of information that can be released. Where data is not available or not for publication, the record has been set to a null value.

This data is Census Collection Districts (CD) based Socio-Economic Indexes for Areas (SEIFA) Index of Economic Resources (IER) - This index includes variables that are associated with economic resources. Variables include rent paid, income by family type, mortgage payments, and rental properties, based on the 2006 census. The data follows the 2006 Australian Standard Geographical Classification (ASGC) boundaries. The Australian Bureau of Statistics (ABS) has developed indexes to allow ranking of regions/areas, providing a method of determining the level of social and economic wellbeing in that region. There are four indexes included in the SEIFA 2006 product. They relate to socio-economic aspects of geographic areas. Each index summarises a different aspect of the socio-economic conditions in an area. The indexes have been obtained by a technique called principal components analysis. This technique summarises the information from a variety of social and economic variables, calculating weights that will give the best summary for the underlying variables. For the SEIFA indexes, each index uses a different set of underlying variables. All the indexes (including the Index of Relative Socio-Economic Disadvantage) have been constructed so that relatively disadvantaged areas (e.g. areas with many low income earners) have low index values. This data is ABS data (catalogue number: 2033.0.55.001) used with permission from the Australian Bureau of Statistics. For more information on this data please visit the Australian Bureau of Statistics.Please note: AURIN has spatially enabled the original data following the 2006 ASGC.

This data is Statistical Local Areas (SLA) based Socio-Economic Indexes for Areas (SEIFA) Index of Advantage/Disadvantage (IRSAD) - Is a continuum of advantage to disadvantage. Low values indicate areas of disadvantage; and high values indicate areas of advantage. This data is based on the 2006 census and follows the 2006 Australian Standard Geographical Classification (ASGC) boundaries. The Australian Bureau of Statistics (ABS) has developed indexes to allow ranking of regions/areas, providing a method of determining the level of social and economic wellbeing in that region. There are four indexes included in the SEIFA 2006 product. They relate to socio-economic aspects of geographic areas. Each index summarises a different aspect of the socio-economic conditions in an area. The indexes have been obtained by a technique called principal components analysis. This technique summarises the information from a variety of social and economic variables, calculating weights that will give the best summary for the underlying variables. For the SEIFA indexes, each index uses a different set of underlying variables. All the indexes (including the Index of Relative Socio-Economic Disadvantage) have been constructed so that relatively disadvantaged areas (e.g. areas with many low income earners) have low index values. This data is ABS data (catalogue number: 2033.0.55.001) used with permission from the Australian Bureau of Statistics. For more information on this data please visit the Australian Bureau of Statistics.Please note: AURIN has spatially enabled the original data following the 2006 ASGC.

This dataset presents the estimates of the internal migration statistics of Australia by Statistical Areas Level 4 (SA4) following the 2011 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2006-07 financial year up to the 2015-16 financial year. Regional internal migration is the movement of people from one region to another within Australia (both interstate and intrastate). For example, it incorporates moves from a Statistical Area Level 4 (SA4) to any other SA4 within the country. Net regional internal migration is the net gain or loss of population through this movement. The ABS has developed a new series of annual regional internal migration estimates (RIME) based on the 2011 edition of the Australian Statistical Geography Standard (ASGS). The Medicare and Defence data used for estimating interstate migration is now also used to estimate internal migration below the state/territory level. However, as Medicare and Defence change of address counts are supplied to the ABS by postcode a method was developed to convert these counts to SA4, the base spatial unit of the ASGS. The method used correspondences to convert to SA4, and adjustments were applied to account for known deficiencies in the Medicare and Defence data. A similar method was used to prepare RIME at the LGA level, based on 2011 boundaries. This data is Australian Bureau of Statistics (ABS) data (catalogue number: 3412.0) used with permission from the ABS. For more information please visit the ABS Explanatory Notes. Please note: RIME are not directly comparable with estimated resident populations (ERPs) because of the different methods and source data used to prepare each series. The combination of natural increase and net migration (internal and overseas) therefore may not correspond with change in ERP. AURIN has spatially enabled the original data.

Socio-Economic Indexes for Areas (SEIFA) is a product developed by the ABS that ranks areas in Australia according to relative socio-economic advantage and disadvantage. The indexes are based on information from the five-yearly Census. SEIFA 2011 is the latest version of this product and consists of four indexes. The Index of Relative Socio-Economic Disadvantage (IRSD) is a general socio-economic index that summarises a range of information about the economic and social conditions of people and households within an area. Unlike the other indexes, this index includes only measures of relative disadvantage. Data last updated: 28th March 2013. Users of this data are advised to carefully read the accompanying information on the SEIFA web page and in the Technical Paper. SEIFA Homepage SEIFA Technical Paper For further information about these and related statistics, contact the National Information and Referral Services on 1300 135 070. Periodicity: 5-Yearly.