Layer containing water main centre lines and associated details. Includes water main name, description, asset section (for As Constructed drawings) and key attributes for water transfer pipes, bypass connections, aqueducts. This layer is intended to be used to locate and obtain details on Melbourne Water's water supply transfer assets for asset management, buildover (Dial-Before-You-Dig) and operational / maintenance purposes. This layer is updated when new information is received from completed projects and updated from certified survey plans. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing water supply service reservoirs (location and extent). Service reservoirs are minor local storages. Information captured using as-constructed drawings and aerial imagery, and includes service reservoir name, category / type, asset identifier, as-constructed plan references plus other key attributes. This layer is intended to be used to locate and obtain details on Melbourne Water's water supply transfer assets for asset management, buildover (Dial-Before-You-Dig) and operational or maintenance purposes. This layer is updated when new information is received from completed projects and/or updated from certified survey plans. Melbourne Water are responsible for reviewing and accepting information which results in update to the existing layer. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing polygons that denote the location and extent of parcels of land that are owned by Melbourne Water. This layer is intended to be used to identify Melbourne Water owned land and responsibilities for the management of Melbourne Water assets. Layer shows general location of assets only and so cannot be used for detailed mapping or analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing water main centre lines and associated details. Includes water main name, description, asset section (for As Constructed drawings) and key attributes for water transfer pipes, bypass connections, aqueducts. This layer is intended to be used to locate and obtain details on Melbourne Water's water supply transfer assets for asset management, buildover (Dial-Before-You-Dig) and operational / maintenance purposes.This layer is updated when new information is received from completed projects and updated from certified survey plans.NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing water supply main centrelines for other authorities (assets not owned by Melbourne Water). This layer is generated from data received from other Water Authorities (Barwon Water, Gippsland Water, DELWP and other). This layer supports Melbourne Water to reference the existence and indicative location of water supply mains and their likely inter-connectivity with Melbourne Water assets. This layer is intended to be used for reference purpose only. Relevant authorities would need to be contacted if the data is to be used other than for reference. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing water supply storage dams (location and extent). These are major water supply system storages. Captured using as-constructed drawings and aerial imagery, and includes storage dam name, category / type, asset identifier, as=-constructed plan references plus other key attributes. This layer is intended to be used to locate and obtain details on Melbourne Water's water supply transfer assets for asset management, buildover (Dial-Before-You-Dig) and operational or maintenance purposes. This layer is updated when new information is received from completed projects and/or updated from certified survey plans. Melbourne Water are responsible for reviewing and accepting information which results in update to the existing layer. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

This layer delineates sewer catchments upstream of retail water company hydraulic information points. Sewer catchments which contribute directly to Melbourne Water assets are also included. This layer supports Melbourne Water to communicate high level data in regards to the existence and indicative location of assets within its responsibility to ensure they are protected throughout the assets life. This layer is updated when new information is received from completed projects and updated from certified survey plans. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing water supply system catchment boundaries for water harvesting in the region of Melbourne. Includes catchment name, type, size of catchment and asset identifier. The type are defined by CATCHO (Open), CATCHC (Closed), and CATCH (Restricted). This layer is intended for general mapping purposes and internal use only, and is not to be used for detailed mapping of, or detailed calculation related to, water supply catchments. This layer is updated when new information is received from completed projects and/or updated from certified survey plans. Melbourne Water are responsible for reviewing and accepting information which results in update to the existing layer. Dataset also includes additional catchments captured originally e.g. Graceburn and Donnellys Weir. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Location and extent of Melbourne Water natural and constructed (man-made) wetlands and lakes. Captured using the Top Water Level (TWL) of each, includes wetland or lake name, asset section (for As Constructed drawings) and key attributes. Data set required to indicate the location and types of assets used for stormwater treatment (treatment and removal of pollutants from the stormwater system) and flow management (helping maintain the flow of water and reduce the impacts of floods), for ongoing condition monitoring, maintenance and hydrologic or vegetation analysis and to assist with the planning and design, construction of future stormwater management (WSUD) options. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Layer containing reclaimed water (recycled) mains and associated details. Includes description, asset section (for As Constructed drawings) and key attributes. Recycled water is supplied to Melbourne's retail water companies – City West Water, South East Water and Yarra Valley Water. This layer supports Melbourne Water to communicate high level data in regards to the existence and indicative location of assets within its responsibility, to ensure they are protected throughout the assets life. This layer is updated when new information is received from completed projects and updated from certified survey plans. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.