The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six pilot sites across Canada (Port of Vancouver, Port of Prince Rupert, Lower St. Lawrence Estuary, Port of Saint John, Placentia Bay, and Iqaluit). The goal of the Program is to gather local information in these areas in effort to build a better understanding of marine ecological conditions. The Maritimes region has developed a physical oceanography program to align with the oceanographic interests and data needs of local communities and stakeholders, with the goal of sharing this information via open data. Starting in 2019, oceanographic parameters including temperature, salinity, depth, turbidity and currents have been continuously monitored at a series of locations covering a broad range of environments in the Port of Saint John and approaches vicinity, including the lower Saint John and Kennebecasis rivers, coastal fringe marshes and embayments, as well as the Musquash estuary Marine Protected Area (MPA). This dataset includes CTD data starting in 2019 and turbidity data from August 2020. Data collection methods range from bottom-mounted instruments in water depths of 10-50 meters, buoyant surface moorings, and hard-mounted instruments in intertidal zones. Intertidal data is interrupted during some low tide events, where the water level drops below the sensor, resulting in loss of functionality for periods up to 1-2 hours. Overall this dataset captures a dynamic balance between salt and fresh water on the highly tidal lower Saint John river, coastal seasonal dynamics in near-shore marine environments in the Musquash MPA, and the constant fluctuations of intertidal creeks and marshes. Updated Nov 2023: included 2022 data; removed daylight savings errors from 2019, 2020 and 2021; updated position for Evandale surface mooring.

Fisheries and Oceans Canada’s (DFO) Coastal Environmental Baseline Program supports the collection of ecological information on the current state of key coastal ecosystems across Canada. This initiative aims to acquire environmental baseline data (physical, chemical and biological) contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems. From this page, you will find links to the data from projects undertaken from 2018-2022 at six coastal sites across Canada.

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six unique sites across Canada, including the Port of Saint John (New Brunswick). The overall purpose of the Program is to collect localized ecological data in these areas to build a better baseline understanding of marine ecological conditions. The Maritimes region has developed a physical oceanography project to align with the interests and data needs of local communities and stakeholders. Starting in 2020, data describing the depth and temperature of tidal flood waters have been collected at a series of intertidal locations in the Port of Saint John vicinity, to characterize high marsh flood tides and water level fluctuations near the Courtenay Bay causeway. Inundation by marine waters in high marsh areas is typically limited to spring tides, while the water level in Courtenay Bay is influenced by anthropogenic infrastructure (e.g. causeway, tide gates). The resulting data can enhance studies ranging from coastal vulnerability and resilience to salt marsh morphodynamics, by quantifying the frequency, amplitude and duration of tidal inundation. Data were collected using Hobo U20-001-02 water level loggers, which were deployed inside stilling wells constructed from 15-inch lengths of perforated ABS pipe (2¼” diameter). The stilling wells were sunk to a depth of 6 inches below ground, with the water level logger suspended inside the well from a bolt near the top. The logger was positioned with a rigid wire such that the measurement volume was equal to ground level, while allowing the logger to be easily removed for downloading and precisely replaced at the measurement location. Loggers were accessed 2-3 times per year to download, and were removed during the winter months. Data have been compensated for changing atmospheric pressure using the Barometric Compensation Tool in HobowarePro (version 3.7.21) and barometric pressure data collected from a dry location during the study period. The resulting water level is reported in meters, and is relative to the elevation of the water level logger (e.g. above ground level). Citation: Port of Saint John intertidal water level and temperature (2020-2022). Coastal Environmental Baseline Program. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. XX-XX-2024

This project was completed by the Coastal Environmental Baseline Program (Coastal and Freshwater Ecology Section) in the Newfoundland and Labrador Science Branch of Fisheries and Oceans Canada (DFO). From 2020-2023, there were semi-annual deployments and retrievals of 3 moored CTDs in the bay. From 2020 to November 2021, moored CTDs collected hourly recordings of conductivity, temperature and pressure. From 2021 through 2023, these CTDs collected year-round, hourly, information on temperature, conductivity, pressure, dissolved oxygen, and chlorophyll-a. Acoustic releases also collected hourly ambient noise (mV) data. This record contains the geographic locations of the sites, and information on the timings and types of data collected at each site.

This project was completed by the Coastal Environmental Baseline Program (Coastal and Freshwater Ecology Section) in the Newfoundland and Labrador Science Branch of Fisheries and Oceans Canada (DFO). The nearshore fish and invertebrate community was sampled annually in Placentia Bay at 14 sites for 5 years (2018 – 2022). The objective of this program was to collect data on juvenile fish (specifically Atlantic cod) communities and habitats within Placentia Bay. The sites and timing (October) were selected based on historical sampling. There were several data types collected during each of these sampling trips. Boat-based beach seining was used to collect data on fish and invertebrate diversity, abundance, distribution, and size. Visual transects were used to identify vegetation and substrate (habitat) types and proportions at seine sites. CTD profiles (temperature, conductivity, depth, and salinity) were obtained using a castaway CTD. Finally, eDNA samples were collected at each site (2018-2021) to obtain complementary information on the presence of juvenile fish and other species present. This record contains the geographic locations of the 14 sites, and information on the timing and type of data collected at each site.

This project was completed by the Coastal Environmental Baseline Program (Coastal and Freshwater Ecology Section) in the Newfoundland and Labrador Science Branch of Fisheries and Oceans Canada (DFO). From 2018 to 2022 baseline biological and physical data were collected in Placentia Bay using Atlantic Zone Monitoring Program (AZMP) and Cold Ocean Productivity Experiment (COPE) protocols. Complementary data were collected in the bay using moored CTDs. Where possible, sampling was conducted monthly at 4 sites between May and November to capture broad scale spatial and temporal trends. Additionally, data were collected bi-weekly in April and May, and monthly from June to September at one of these sites to capture finer scale temporal trends, such as spring blooms, in collaboration with Dr. C. McKenzie. Phytoplankton were collected using vertical net tows and niskins. Zooplankton were collected using vertical net tows. CTDs were used to collect physical and biogeochemical water column data including temperature, pressure, salinity, depth, chlorophyll-a, turbidity, dissolved oxygen, pH, photosynthetic active radiation (PAR), fluorescent dissolved organic matter (FDOM), and conductivity. Water biogeochemistry data were obtained by collecting water samples with niskins at depths of 5, 10, 20, 30, 40m, and 10m above bottom to measure nutrients, chlorophyll-a, carbonates, and particulate organic carbon and nitrogen (POC/PON). Additionally, eDNA samples were taken at each of the 4 sampling sites. This record contains the geographic locations of the sites, and information on the timing and type of data collected at each site.

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six pilot sites across Canada (Port of Vancouver, Port of Prince Rupert, Lower St. Lawrence Estuary, Port of Saint John, Placentia Bay, and Iqaluit). The goal of the Program is to gather local information in these areas in effort to build a better understanding of marine ecological conditions. The Maritimes region has developed a habitat classification program to align with the oceanographic interests and data needs of local communities and stakeholders, with the goal of sharing this information via open data. In 2020, a habitat survey in the lower Musquash Marine Protected Area (MPA) was undertaken to further develop this project, using an Autonomous Underwater Vehicle (AUV) equipped with high-frequency (450 kHz) side scan sonar to build a habitat map of the MPA. This dataset includes mosaicked series of sonar images (raw & position-corrected versions), covering roughly 6 km2 of marine and intertidal areas in the Musquash MPA. Doppler Velocity logs and mission-specific files for each survey are also included, along with detailed methodological documentation. These data were generated from 17 separate survey missions that were completed in August, September and October 2020.

The Environmental Monitoring and Assessment Program (EMAP) National Coastal Database contains estuarine and coastal data that EMAP and Regional-EMAP have collected since 1990 from thousands of stations along the U.S. coasts. These data include water column data, sediment contaminants and toxicity data, and benthic macroinvertebrate and demersal fish community and contaminant data.

These data provide an accurate high-resolution shoreline compiled from imagery of Timbalier Bay to Lake Felicity, LA . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

This dataset includes a reference baseline used by the Digital Shoreline Analysis System (DSAS) to calculate rate-of-change statistics for the sheltered north coast of Alaska coastal region between the U.S. Canadian Border to the Hulahula River for the time period 1947 to 2010. This baseline layer serves as the starting point for all transects cast by the DSAS application and can be used to establish measurement points used to calculate shoreline-change rates.