,Data set contains:,

,Wykaz jest publikacją opracowaną przez Komisję jako realizacja zapisu § 3 ust. 1 pkt 2 rozporządzenia Ministra Spraw Wewnętrznych i Administracji z dnia 24 marca 2000 r. w sprawie trybu i zakresu działania Państwowej Rady Geodezyjnej i Kartograficznej i Komisji Standaryzacji Nazw Geograficznych poza Granicami Rzeczypospolitej Polskiej oraz zasad wynagradzania ich członków wprowadzonego nowelizacją rozporządzenia z 2009 roku.,W wykazie umieszczono 195 państw uznawanych przez Rzeczpospolitą Polską (tj. 193 państwa członkowskie ONZ oraz Kosowo i Watykan) i 69 terytoriów niesamodzielnych. Załącznikiem do wykazu jest lista dziewięciu terytoriów o nieustalonym lub spornym statusie międzynarodowym.,Zawarte w wykazie nazwy państw, terytoriów i ich stolic uzyskały akceptację Ministerstwa Spraw Zagranicznych. Informacje o przynależności politycznej terytoriów oraz przypisy wyjaśniające status państw i terytoriów albo ich nazwy pochodzą od MSZ. Przymiotniki od nazw państw i terytoriów oraz nazwy mieszkańców podano zgodnie z opinią wydaną przez Zespół Ortograficzno-Onomastyczny Rady Języka Polskiego. Również z językoznawcami konsultowana była podana w wykazie odmiana nazw.,Dla każdego państwa podano następujące informacje:,Analogiczne informacje jak te dotyczące państw podano również przy terytoriach niesamodzielnych i o nieustalonym lub spornym statusie międzynarodowym, jedynie zamiast nazw obywateli podano nazwy mieszkańców danego terytorium. Dodatkową informacją podaną przy terytoriach jest przynależność polityczna.,Zgodnie z § 3 ust. 3 wyżej wymienionego rozporządzenia urzędowy wykaz nazw państw i terytoriów niesamodzielnych publikowany jest w celu stosowania przez podmioty wykonujące zadania publiczne na terytorium Rzeczypospolitej Polskiej.,

The digital Electoral Boundaries and their legal identifiers have been supplied by the Electoral Commission from each state and territory as well as the Australian Electoral Commission and are available below. These boundaries undergo re-distribution depending on population of the electorate before each election. Electoral Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset contains boundaries in seven themes: Australian Bureau of Statistics (ABS) boundaries, electoral boundaries, state and territory boundaries, local government areas, suburbs/localities, wards and town points. As at November 2019, users have the option to download datasets with feature coordinates referencing the new Geocentric Datum of Australia 2020 (GDA2020) in addition to datasets on the GDA94 datum. For GDA2020 datasets, the name of the zip folder and the root folder (once extracted) include a reference to GDA2020. For GDA94 datasets, the zip and root folder names do not contain the datum name (i.e. they remain the same as previous releases). For example, the zip and root folder for Administrative Boundaries downloaded in GDA2020 for November 2019 looks like this: • NOV19_AdminBounds_ESRIShapefileorDBFfile_GDA2020; or • NOV19_AdminBounds_MapInfoTABFormat_GDA2020 The zip and root folder for Administrative Boundaries in GDA94 for November 2019 looks like this: • NOV19_AdminBounds_ESRIShapefileorDBFfile; or • NOV19_AdminBounds_MapInfoTABFormat Irrespective of the datum chosen, files within the respective folder use exactly the same naming structures. **There were no updates in the August 2024 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Electoral Boundaries and their legal identifiers have been supplied by the Electoral Commission from each state and territory as well as the Australian Electoral Commission and are available below. These boundaries undergo re-distribution depending on population of the electorate before each election. Electoral Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset contains boundaries in seven themes: Australian Bureau of Statistics (ABS) boundaries, electoral boundaries, state and territory boundaries, local government areas, suburbs/localities, wards and town points. As at November 2019, users have the option to download datasets with feature coordinates referencing the new Geocentric Datum of Australia 2020 (GDA2020) in addition to datasets on the GDA94 datum. For GDA2020 datasets, the name of the zip folder and the root folder (once extracted) include a reference to GDA2020. For GDA94 datasets, the zip and root folder names do not contain the datum name (i.e. they remain the same as previous releases). For example, the zip and root folder for Administrative Boundaries downloaded in GDA2020 for November 2019 looks like this: • NOV19_AdminBounds_ESRIShapefileorDBFfile_GDA2020; or • NOV19_AdminBounds_MapInfoTABFormat_GDA2020 The zip and root folder for Administrative Boundaries in GDA94 for November 2019 looks like this: • NOV19_AdminBounds_ESRIShapefileorDBFfile; or • NOV19_AdminBounds_MapInfoTABFormat Irrespective of the datum chosen, files within the respective folder use exactly the same naming structures. ** There were no updates in the August 2024 release ** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Electoral Boundaries and their legal identifiers have been supplied by the Electoral Commission from each state and territory as well as the Australian Electoral Commission and are available below. These boundaries undergo re-distribution depending on population of the electorate before each election. Electoral Boundaries are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset contains boundaries in seven themes: Australian Bureau of Statistics (ABS) boundaries, electoral boundaries, state and territory boundaries, local government areas, suburbs/localities, wards and town points. As at November 2019, users have the option to download datasets with feature coordinates referencing the new Geocentric Datum of Australia 2020 (GDA2020) in addition to datasets on the GDA94 datum. For GDA2020 datasets, the name of the zip folder and the root folder (once extracted) include a reference to GDA2020. For GDA94 datasets, the zip and root folder names do not contain the datum name (i.e. they remain the same as previous releases). For example, the zip and root folder for Administrative Boundaries downloaded in GDA2020 for November 2019 looks like this: • NOV19_AdminBounds_ESRIShapefileorDBFfile_GDA2020; or • NOV19_AdminBounds_MapInfoTABFormat_GDA2020 The zip and root folder for Administrative Boundaries in GDA94 for November 2019 looks like this: • NOV19_AdminBounds_ESRIShapefileorDBFfile; or • NOV19_AdminBounds_MapInfoTABFormat Irrespective of the datum chosen, files within the respective folder use exactly the same naming structures. **Notable changes in the August 2024 release** * An update to the Northern Territory State Electoral Boundaries has been applied to reflect the redistribution of the Legislative Assembly boundaries gazetted on 15 December 2023. The boundaries will apply at the NT Territory Election that will be held on 24 August 2024. Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).

The digital Local Government Areas and their legal identifiers have been derived from the cadastre data from each Australian state and territory jurisdiction and are available below. Local Government Areas are part of Geoscape Administrative Boundaries, which is built and maintained by [Geoscape Australia](https://geoscape.com.au/) using authoritative government data. Further information about contributors to Administrative Boundaries is available [here](https://geoscape.com.au/legal/data-copyright-and-disclaimer/). The full Administrative Boundaries dataset comprises seven Geoscape products: * Localities * Local Government Areas (LGAs) * Wards * Australian Bureau of Statistics (ABS) Boundaries, * Electoral Boundaries * State Boundaries and * Town Points Updated versions of Administrative Boundaries are published on a quarterly basis. Users have the option to download datasets with feature coordinates referencing either GDA94 or GDA2020 datums. **There were no updates in the February 2025 release** Further information on Administrative Boundaries, including FAQs on the data, is available [here](https://geoscape.com.au/data/administrative-boundaries/) through Geoscape Australia’s network of [partners](https://geoscape.com.au/partners/). They provide a range of commercial products based on Administrative Boundaries, including software solutions, consultancy and support. Note: On 1 October 2020, PSMA Australia Limited began trading as Geoscape Australia. ## License Information The Australian Government has negotiated the release of Administrative Boundaries to the whole economy under an [open CCBY 4.0 license](https://creativecommons.org/licenses/by/4.0/). Users must only use the data in ways that are consistent with the Australian Privacy Principles issued under the Privacy Act 1988 (Cth). **Users must also note the following attribution requirements:** _Preferred attribution for the Licensed Material:_ > _Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/). _Preferred attribution for Adapted Material:_ > _Incorporates or developed using Administrative Boundaries © [Geoscape Australia](https://geoscape.com.au/legal/data-copyright-and-disclaimer/) licensed by the Commonwealth of Australia under_ [_Creative Commons Attribution 4.0 International licence (CC BY 4.0)_](https://creativecommons.org/licenses/by/4.0/).