This dataset provides wall-to-wall maps of forest structure across Canada's 650 million hectare forested ecosystems for the year 2022, generated at a spatial resolution of 30 m. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Structure estimates include key attributes such as canopy height, canopy cover, and aboveground biomass, derived using a combination of airborne lidar and Landsat-based spectral composites. Structure models were trained using the - lidar-plot framework - (Wulder et al. 2012), which integrates co-located airborne lidar data and ground plot measurements with Landsat time-series composites (Hermosilla et al. 2016). A Nearest Neighbour imputation approach was applied to estimate structural attributes across the full extent of Canada's forested area. These nationally consistent products are intended to support strategic-level forest monitoring and assessment and are not designed for operational forest management. For further details on the methods, accuracy assessment, and source data, see Matasci et al. (2018). Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment, 216, 697-714. https://doi.org/10.1016/j.rse.2018.07.024 (Matasci et al. 2018)

This dataset provides annual maps of aboveground biomass (AGB, Mg/ha) for forests in Washington, Oregon, Idaho, and western Montana, USA, for the years 2000-2016, at a spatial resolution of 30 meters. Tree measurements were summarized with the Fire and Fuels Extension of the Forest Vegetation Simulator (FFE-FVS) to estimate AGB in field plots contributed by stakeholders, then lidar was used to predict plot-level AGB using the Random Forests machine learning algorithm. The machine learning outputs were used to predict AGB from Landsat time series imagery processed through LandTrendr, climate metrics generated from 30-year climate normals, and topographic metrics generated from a 30-m Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM). The non-forested pixels were masked using the PALSAR 2009 forest/nonforest mask.

This dataset includes estimates of annual forest aboveground biomass over the state of Maryland, USA, for the period 1984-2023. It was generated by a modeling approach that linked an ecosystem model called Ecosystem Demography (ED) model, airborne lidar data of canopy height in circa 2010, and the remote sensing based land cover change dataset (NAFD).

This dataset holds aboveground biomass (AGB) estimates at 10-m spatial resolution for the Howland Research Forest in central Maine for 2012, 2015, 2017, 2021, and 2023. Forest inventory data were collected using 50 fixed-area plot sampling during the summers of 2021, 2023, and 2024. Plots included permanent inventory plots around existing flux towers and additional plots to ensure representation of various forest conditions. Each plot had a radius of 7.98 m. In addition, leaf-off airborne LiDAR data were collected by the USGS 3DEP project in 2012, 2015, and 2023, and leaf-on data were obtained from the NASA G-LiHT project for 2017 and 2021. The LANDIS-II forest landscape model along with its Biomass Succession extension was used to simulate ecosystem dynamics in Howland Forest. Then, a random forest (RF) model was used to generate wall-to-wall biomass maps for the research forest from the LiDAR data. The RF model was calibrated from in situ AGB measurements from plots and simulated AGB values for the LiDAR acquisition years. Howland Research Forest is a low-elevation transitional forest dominated by spruce and hemlock, with conifer and northern hardwood species. The data are provided in cloud optimized GeoTIFF format.

This dataset holds estimates of forest aboveground biomass (AGB) for Maine, USA, in 2023. AGB was estimated using airborne LiDAR data from the USGS 3DEP project and a deep learning convolutional neural network (CNN) model. The airborne LiDAR datasets used in this mapping were collected in different years. The CNN model was calibrated using plot-level forest inventory data with precise location measurements and spectral indices derived from multiple remote sensing products. Stand-level biomass succession models, developed from the USDA Forest Service Forest Inventory and Analysis (FIA) data, were applied to project biomass estimates to the year 2023 with 10-m spatial resolution. The data are provided in GeoTIFF format.

This dataset provides estimates of Aboveground dry woody Biomass Density (AGBD) for high northern latitude forests at a 30-m spatial resolution. It is designed both for boreal-wide mapping and filling the northern spatial data gap from NASA's Global Ecosystem Dynamics Investigation (GEDI) project. Mapping forest aboveground biomass is essential for understanding, monitoring, and managing forest carbon stocks toward climate change mitigation. The AGBD estimates cover the extent of high latitude boreal forests and extend southward to 50 degrees latitude outside the boreal zone. AGBD was predicted using two modeling steps: 1) Ordinary Least Squares (OLS) regression related field plot measurements of AGBD to NASA's ICESat-2 30-m lidar samples, and 2) random forest models were used to extend estimates beyond the field plots by relating ICESat-2 AGBD predictions to wall-to-wall covariate stacks from Harmonized Landsat Sentinel-2 (HLS) and the Copernicus DEM. Per-pixel uncertainties are estimated from bootstrapping both models. Non-vegetated areas (e.g. built up, water, rock, ice) were masked out. HLS composites and ICESat-2 data were from 2019-2021; three years of conditions were aggregated into the circa 2020 map. ICESat-2 data were filtered to include only strong beams, growing seasons (June through September), solar elevations less than 5 degrees, snow free land (snow flag set to 1), and "msw_flag" equal to 0 (clear skies and no observed atmospheric scattering). ICESat-2's ATL08 product was resampled to a 30-m spatial resolution to better match both the field plots and mapped pixels. HLS data (L30HLS) were used to create a greenest pixel composite of growing season multispectral data, which was then used to compute a suite of vegetation indices: NDVI, NDWI, NBR, NBR2, TCW, TCG. These were then used, in combination with the slope and elevation data from the Copernicus DEM product, to predict 30-m AGBD per 90-km tile. Estimates of mean AGBD with standard deviation are provided in cloud-optimized GeoTIFF (CoG) format. Training data are in comma-separated values (CSV) format. A polygon map of data tiles is included as a GeoPackage file and a Shapefile.

This dataset provides estimated annual aboveground biomass (AGB) density for live woody (tree and shrub) species and corresponding standard errors at a 30 m spatial resolution for the boreal forest biome portion of the Core Study Domain of NASA's Arctic-Boreal Vulnerability Experiment (ABoVE) Project (Alaska and Canada) over the time period 1984-2014. The data were derived from a time series of Landsat-5 and Landsat-7 surface reflectance imagery and full-waveform lidar returns from the Geoscience Laser Altimeter System (GLAS) flown onboard IceSAT from 2004 to 2008. The Change Detection and Classification (CCDC) model-fitting algorithm was used to estimate the seasonal variability in surface reflectance, and AGB density data were produced by applying allometric equations to the GLAS lidar data. A Gradient Boosted Machines machine learning algorithm was used to predict annual AGB density across the study domain given the seasonal variability in surface reflectance and other predictors. The data received statistical smoothing to reduce noise and uncertainty was estimated at the pixel level. These data contribute to the characterization of how biomass stocks are responding to climate and disturbance in boreal forests.

This dataset provides annual maps of aboveground biomass (AGB, Mg/ha) for forests in Washington, Oregon, Idaho, and western Montana, USA, for the years 2000-2016, at a spatial resolution of 30 meters. Tree measurements were summarized with the Fire and Fuels Extension of the Forest Vegetation Simulator (FFE-FVS) to estimate AGB in field plots contributed by stakeholders, then lidar was used to predict plot-level AGB using the Random Forests machine learning algorithm. The machine learning outputs were used to predict AGB from Landsat time series imagery processed through LandTrendr, climate metrics generated from 30-year climate normals, and topographic metrics generated from a 30-m Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM). The non-forested pixels were masked using the PALSAR 2009 forest/nonforest mask.

These data consist of high-resolution maps of aboveground biomass at four forested sites in the US: Garcia River Tract in California, Anne Arundel and Howard Counties in Maryland, Parker Tract in North Carolina, and Hubbard Brook Experimental Forest in New Hampshire. Biomass maps were generated using a combination of field data (forest inventory and Lidar) and modeling approaches. Estimates of uncertainty are also provided for the Maryland site using two different modeling methodologies.These data provide estimates of aboveground biomass for the nominal year of 2011 at 20-50 meter resolution in units of megagrams of carbon per hectare (or acre for the Garcia Tract site).The data are presented as a series of 11 GeoTIFF (*.tif) files.

These data consist of high-resolution maps of aboveground biomass at four forested sites in the US: Garcia River Tract in California, Anne Arundel and Howard Counties in Maryland, Parker Tract in North Carolina, and Hubbard Brook Experimental Forest in New Hampshire. Biomass maps were generated using a combination of field data (forest inventory and Lidar) and modeling approaches. Estimates of uncertainty are also provided for the Maryland site using two different modeling methodologies.These data provide estimates of aboveground biomass for the nominal year of 2011 at 20-50 meter resolution in units of megagrams of carbon per hectare (or acre for the Garcia Tract site).The data are presented as a series of 11 GeoTIFF (*.tif) files.