The Digital Elevation Model (DEM) data is organized into 20km x 20km tiles with a spatial resolution of 5m. This data is intended to be used for pre-engineering survey and design as well as the production of planimetric mapping at differing accuracies. This data is intended for GIS and remote sensing application that require a high resolution, high accuracy elevation model. Official GEO title: Greater Toronto Area digital elevation model 2002 *[DEM]: Digital Elevation Model

A digital elevation model (DEM) is a 3D representation of the Earth's surface, created from terrain elevation data. These DEMs were generated from LiDAR and LAS data was gathered for the City of Philadelphia

The Ontario Digital Surface Model (Imagery-Derived) is a raster elevation product that was generated from the elevation point clouds created via pixel-correlation from aerial photography. A DSM is the highest reflective surface of features captured by the sensor. This surface is also referred to as the first reflective surface. The DSM may include: * treetops * rooftops and tops of towers * telephone poles * other natural or artificial features * ground surface if there is no vegetative ground cover This data is for geospatial tech specialists, and is used by government, municipalities, conservation authorities and the private sector for land use planning and environmental analysis.

High resolution (1-2m spacing) digital elevation models (DEMs) covering portions of the state. The DEMs are derived from LIDAR data and depict the bare earth terrain in raster format. Multiple agencies (Federal, State, and County) provided the data. The DEMs can be downloaded through the NYS Orthos Online app (http://orthos.dhses.ny.gov/).

The Ontario Digital Surface Model (DSM) (Lidar-Derived) Land Information Ontario dataset is a raster product that provides a representation of both surface and ground features derived from a classified lidar point cloud. A DSM is the highest reflective surface of features captured by the sensor. This surface is also referred to as the first reflective surface. The DSM may include: * treetops * rooftops and tops of towers * telephone poles * other natural or artificial features * ground surface if there is no vegetative ground cover The DSM data is available in 1 km by 1 km non-overlapping tiles grouped into packages for download. This dataset is a compilation of lidar data from multiple acquisition projects, so specifications, parameters and sensors may vary by project. This data is for geospatial tech specialists, and is used by government, municipalities, conservation authorities and the private sector for land use planning and environmental analysis.

A bare-earth, hydro-flattened, digital-elevation surface model derived from 2010 Light Detection and Ranging (LiDAR) data. Surface models are raster representations derived by interpolating the LiDAR point data to produce a seamless gridded elevation data set. A Digital Elevation Model (DEM) is a surface model generated from the LiDAR returns that correspond to the ground with all buildings, trees and other above ground features removed. The cell values represent the elevation of the ground relative to sea level. The DEM was generated by interpolating the LiDAR ground points to create a 1 foot resolution seamless surface. Cell values correspond to the ground elevation value (feet) above sea level. A proprietary approach to surface model generation was developed that reduced spurious elevation values in areas where there were no LiDAR returns, primarily beneath buildings and over water. This was combined with a detailed manual QA/QC process, with emphasis on accurate representation of docks and bare-earth within 2000ft of the water bodies surrounding each of the five boroughs.