Seasonal temperature climatology of the Canadian Pacific Exclusive Economic Zone (1980-2010)
공공데이터포털
Description: Seasonal temperature climatology of the Northeast Pacific Ocean was computed from historical observations including all available conductivity-temperature-depth (CTD), bottle, expendable bathy-thermograph (XBT), and Argo data in NOAA (http://www.argo.ucsd.edu/), Marine Environmental Data Service (MEDS), and Institute of Ocean Sciences archives over 1980 to 2010 period. Methods: Calculations, including smooth and interpolation, were carried out in sixty-five subregions and up to fifty-two vertical levels from surface to 5000m. Seasonal averages were computed as the median of yearly seasonal values. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal temperature climatology for the Canadian Pacific Exclusive Economic Zone (EEZ), a subset of seasonal climatology of the Northeast Pacific Ocean, in high spatial resolution of 1/300 degree. References: Foreman, M. G. G., W. R. Crawford, J. Y. Cherniawsky, and J. Galbraith (2008). Dynamic ocean topography for the northeast Pacific and its continental margins, Geophys. Res. Lett., 35, L22606, doi: 10.1029/2008GL035152. Data Sources: NOAA, MEDS and IOS observational data Uncertainties: Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.
Seasonal salinity climatology of the Canadian Pacific Exclusive Economic Zone (1980-2010)
공공데이터포털
Description: Seasonal salinity climatology of the Northeast Pacific Ocean were computed from historical observations including all available conductivity-temperature-depth (CTD), bottle, expendable bathy-thermograph (XBT), and Argo data in NOAA (http://www.argo.ucsd.edu/), Marine Environmental Data Service (MEDS), and Institute of Ocean Sciences archives over 1980 to 2010 period. Methods: Calculations, including smooth and interpolation, were carried out in sixty-five subregions and up to fifty-two vertical levels from surface to 5000m. Seasonal averages were computed as the median of yearly seasonal values. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal salinity climatology for the Canadian Pacific Exclusive Economic Zone (EEZ), a subset of seasonal climatology of the Northeast Pacific Ocean, with high spatial resolution of 1/300 degree. References: Foreman, M. G. G., W. R. Crawford, J. Y. Cherniawsky, and J. Galbraith (2008). Dynamic ocean topography for the northeast Pacific and its continental margins, Geophys. Res. Lett., 35, L22606, doi: 10.1029/2008GL035152. Data Sources: NOAA, MEDS and IOS observational data Uncertainties: Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.
Seasonal Climatologies of the Northeast Pacific Ocean (1980-2010)
공공데이터포털
Description: Seasonal climatologies (temperature, salinity, and sigma-t) of the Northeast Pacific Ocean were computed from historical observations including all available conductivity-temperature-depth (CTD), bottle, expendable bathy-thermograph (XBT), and Argo data in NOAA (http://www.argo.ucsd.edu/), Marine Environmental Data Service (MEDS), and Institute of Ocean Sciences archives over 1980 to 2010 period in spatial resolution ranging from approximately 100m to 70km. Methods: Calculations, including smooth and interpolation, were carried out in sixty-five subregions and up to fifty-two vertical levels from surface to 5000m. Seasonal averages were computed as the median of yearly seasonal values. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. Uncertainties: Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.
Seasonal sigma-t climatology of the Canadian Pacific Exclusive Economic Zone (1980-2010)
공공데이터포털
Description: Seasonal sigma-t climatology of the Northeast Pacific Ocean was computed from historical observations including all available conductivity-temperature-depth (CTD), bottle, expendable bathy-thermograph (XBT), and Argo data in NOAA (http://www.argo.ucsd.edu/), Marine Environmental Data Service (MEDS), and Institute of Ocean Sciences archives over 1980 to 2010 period. Methods: Calculations, including smooth and interpolation, were carried out in sixty-five subregions and up to fifty-two vertical levels from surface to 5000m. Seasonal averages were computed as the median of yearly seasonal values. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal sigma-t climatology for the Canadian Pacific Exclusive Economic Zone (EEZ), a subset of seasonal climatology of the Northeast Pacific Ocean, in high spatial resolution of 1/300 degree. References: Foreman, M. G. G., W. R. Crawford, J. Y. Cherniawsky, and J. Galbraith (2008). Dynamic ocean topography for the northeast Pacific and its continental margins, Geophys. Res. Lett., 35, L22606, doi: 10.1029/2008GL035152 Data Sources: NOAA, MEDS and IOS observational data Uncertainties: Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.
Seasonal Temperature Climatology of the British Columbia Exclusive Economic Zone (2001-2020)
공공데이터포털
Description: Seasonal climatologies for temperature of the Northeast Pacific Ocean were computed to cover the period 2001 to 2020. Historical observations included all available conductivity-temperature-depth (CTD), bottle and profiling floats in the NODC World Ocean Database, Marine Environmental Data Services (MEDS), Institute of Ocean Sciences Water Properties website and the Canadian Integrated Ocean Observing System (CIOOS Pacific). Methods: Interpolation was carried out in up to fifty-two vertical levels from surface to 5000m. Data-Interpolating Variational Analysis (DIVA) was used for spatial interpolation for all years within each season and estimates projected onto a consistent grid. The average of the grid nodes was calculated to obtain the seasonal climatology. DIVA was used again on the final climatology followed by a median filter and a 5-point smoother. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal temperature climatologies for the Canadian Pacific Exclusive Economic Zone (EEZ), a subset of seasonal climatologies of the Northeast Pacific Ocean, in high spatial resolution of 1/300 degree. Data Sources: NODC, MEDS, IOS and CIOOS Pacific Data. Uncertainties: Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.
Seasonal Salinity Climatology of the British Columbia Exclusive Economic Zone (2001-2020)
공공데이터포털
Description: Seasonal climatologies for salinity of the Northeast Pacific Ocean were computed to cover the period 2001 to 2020. Historibal observations included all available conductivity-temperature_depth (CTD), bottle and profiling floats in the NODC World Ocean Database, Marine Environmental Data Services (MEDS), Institute of Ocean Sciences Water Properties website and the Canadian Integrated Ocean Observing System (CIOOS Pacific). Methods: Interpolation was carried out in up to fifty-two vertical levels from surface to 5000m. Data-Interpolating Variational Analysis (DIVA) was used for spatial interpolation for all years within each season and estimates projected onto a consistent grid. The average of the grid nodes was calculated to obtain the seasonal climatology. DIVA was used again on the final climatology followed by a median filter and a 5-point smoother. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal salinity climatology for the Canadian Pacific Exclusive Economic Zone (EEZ), a subset of seasonal climatology of the Northeast Pacific Ocean, with high spatial resolution of 1/300 degree. Data Sources: NODC, MEDS, IOS and CIOOS Pacific Data. Uncertainties: Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.
Seasonal Climatologies of the Canadian Pacific Exclusive Economic Zone from British Columbia Continental Margin (BCCM) Model (1981-2010)
공공데이터포털
Description: Seasonal climatologies of the Canadian Pacific Exclusive Economic Zone (CPEEZ) were computed from a numerical simulation of the British Columbia continental margin (BCCM) model for the 1981 to 2010 period, which can be considered as a representation of the climatological state of the region. Methods: The BCCM model is an ocean circulation-biogeochemical model implementation of the Regional Ocean Modelling System (ROMS version 3.5). The horizontal resolution is eddy-resolving at 3 km and the vertical discretization is based on a terrain-following coordinate system with 42 depth levels of increasing resolution near the surface. A detailed description of the BCCM model is given in Peña et al. (2019). Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal climatology of temperature, salinity, current speed, nitrate, oxygen, total alkalinity, dissolved inorganic carbon, pH, aragonite saturation state, phytoplankton, and primary production. The data include 47 vertical levels (surface, bottom, and 45 more selected depths), except for total phytoplankton (surface values only) and primary production (depth-integrated values). A layer giving the bottom depth in metres at the centre of each grid point is also provided. Model grids were set to NaN values in regions where the model output is highly uncertain, such as inlets, nearshore areas, and the Strait of Georgia. Uncertainties: Model results have been compared against tide gauge data, altimetry, CTD and nutrient profiles, observed geostrophic currents, and seasonal temperature and salinity climatologies over the 1981 to 2010 period. The model is successful in reproducing the main features of the region including salient features of the seasonal cycle and the vertical structure of density and nutrients.
Seasonal Climatologies of the Canadian Pacific Exclusive Economic Zone from British Columbia Continental Margin (BCCM) Model (1993-2020)
공공데이터포털
Description: Seasonal climatologies of the Canadian Pacific Exclusive Economic Zone (CPEEZ) were computed from a numerical simulation of the British Columbia continental margin (BCCM) model for the 1993 to 2020 period, which can be considered as a representation of the climatological state of the region. Methods: The BCCM model is an ocean circulation-biogeochemical model implementation of the Regional Ocean Modelling System (ROMS version 3.5). The horizontal resolution is eddy-resolving at 3 km and the vertical discretization is based on a terrain-following coordinate system with 42 depth levels of increasing resolution near the surface. A detailed description of the BCCM model is given in Peña et al. (2019). Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal climatology of temperature, salinity, current speed, nitrate, oxygen, total alkalinity, dissolved inorganic carbon, pH, aragonite saturation state, phytoplankton, and primary production. The data include 47 vertical levels (surface, bottom, and 45 more selected depths), except for total phytoplankton (surface values only) and primary production (depth-integrated values). A layer giving the bottom depth in metres at the centre of each grid point is also provided. Model grids were set to NaN values in regions where the model output is highly uncertain, such as inlets, nearshore areas, and the Strait of Georgia. Uncertainties: Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.
Seasonal pH climatology of the Canadian Pacific Exclusive Economic Zone from BCCM model (1981-2010)
공공데이터포털
Description: Seasonal mean pH from the British Columbia continental margin model (BCCM) were averaged over the 1981 to 2010 period to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods: The pH at up to forty-six linearly interpolated vertical levels from surface to 2400 m and at the sea bottom are included. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal pH climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution and 47 vertical levels. Uncertainties: Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.
Seasonal pH climatology of the Canadian Pacific Exclusive Economic Zone from BCCM model (1993-2020)
공공데이터포털
Description: Seasonal mean pH from the British Columbia continental margin model (BCCM) were averaged over the 1993 to 2020 period to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods: The pH at up to forty-six linearly interpolated vertical levels from surface to 2400 m and at the sea bottom are included. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal pH climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution and 47 vertical levels. Uncertainties: Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.