데이터셋 상세
캘리포니아 오픈데이터
CGS Map Sheet 48: National Loss from Earthquake Damage, Conterminous United States (2014 Estimate)
"Annualized Earthquake Losses (AEL) are economic losses from earthquake shaking-related building damage. These data use the most recent National Seismic Hazard Maps (the years 2008 and 2014 cycles), updated census data on population, and economic exposure estimates of general building stock to quantify annualized earthquake loss (AEL) for the conterminous United States. The AEL analyses were performed using the Federal Emergency Management Agency's (FEMA) Hazus software, which facilitated a systematic comparison of the influence of the 2014 National Seismic Hazard Maps in terms of annualized loss estimates in different parts of the country. These data do not include losses from ground-failure effects such as landslide, liquefaction, surface fault rupture, or losses due to other secondary effects such as fires following earthquakes. Building economic losses are direct economic losses including structural damage, non-structural damage, and content damage; as well as building damage-related economic losses, such as inventory loss, relocation cost, loss of proprietors’ income, and rental income loss. These do not include losses associated with business interruption. Replacement costs and loss valuations are based on 2014 dollars."
데이터 정보
연관 데이터
CGS Map Sheet 48: Historic Earthquakes, 1769 to 2015 - California (Magnitude 5.0-plus)
공공데이터포털
Epicenters of known M≥5 earthquakes from 1769 to 2016 are shown for California and a 100 km area bordering the state. Earthquakes are grouped by: M = 5-6; M = 6-7; M = 7+.
CGS Map Sheet 48: Fault-based seismic sources used in the Uniform California Earthquake Rupture Forecast, Version 3 (UCERF3)
공공데이터포털
Data show fault-based seismic sources used in the time-independent component of the Uniform California Earthquake Rupture Forecast, Version 3 (UCERF3), which provides authoritative estimates of the magnitude, location, and time-averaged frequency of potentially damaging earthquakes in California. Fault model slip rates are given in millimeters per year. The shapefile depicts the surface traces of modeled faults, which are simplified from the CGS – USGS Quaternary Fault and Fold database (https://earthquake.usgs.gov/hazards/qfaults/). For modeled blind fault seismic sources, the traces represent the map-view fault tip projection of the subsurface fault. For additional information regarding modeled faults in UCERF3 please refer to Appendix A of the UCERF3 report (https://pubs.usgs.gov/of/2013/1165/). For additional information about UCERF3 please see http://www.conservation.ca.gov/cgs/rghm/psha/Pages/sr_228.aspx for the full UCERF3 publication and supporting products.
CGS Map Sheet 48: Earthquake Shaking Potential for California (revised 2016)
공공데이터포털
The California Geological Survey published maps of “Earthquake Shaking Potential for California” in 1999 and has revised the maps following each update of the National Seismic Hazard Maps (NSHM). Similar to the NSHMs, the Earthquake Shaking Potential Maps for California depict expected intermediate period (1s or 1hz) ground motions with 2% exceedance probability in 50 years. Unlike the NSHMs, Earthquake Shaking Potential Map for California incorporates anticipated amplification of ground motions by local soil conditions. The current update of the Earthquake Shaking Potential Map for California (California Geological Survey Map Sheet 48) is based on the 2014 NSHMs developed by the United States Geological Survey (Petersen et al., 2014), a new map of the average shear wave velocity in the upper 30m of the earth’s surface for California (Wills et al., 2015), and a new semi-empirical nonlinear site amplification model (Seyhan and Stewart, 2014).
CGS Seismic Hazards Program: Unevaluated Areas
공공데이터포털
This is a digital Seismic Hazard Zone Map presenting areas where liquefaction and landslides may occur during a strong earthquake. Three types of geological hazards, referred to as seismic hazard zones, may be featured on the map: 1) liquefaction, 2) earthquake-induced landslides, and 3) overlapping liquefaction and earthquake-induced landslides. In addition, a fourth feature may be included representing areas not evaluated for liquefaction or earthquake-induced landslides. Developers of properties falling within any of the three zones may be required to investigate the potential hazard and mitigate its threat during the local permitting process.
CGS Seismic Hazards Program: Unevaluated Areas
공공데이터포털
This is a digital Seismic Hazard Zone Map presenting areas where liquefaction and landslides may occur during a strong earthquake. Three types of geological hazards, referred to as seismic hazard zones, may be featured on the map: 1) liquefaction, 2) earthquake-induced landslides, and 3) overlapping liquefaction and earthquake-induced landslides. In addition, a fourth feature may be included representing areas not evaluated for liquefaction or earthquake-induced landslides. Developers of properties falling within any of the three zones may be required to investigate the potential hazard and mitigate its threat during the local permitting process.
CGS Seismic Hazards Program: Alquist-Priolo Fault Hazard Zones
공공데이터포털
This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.
CGS Seismic Hazards Program: Alquist-Priolo Fault Hazard Zones
공공데이터포털
This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.
CGS Map Sheet 48: Slip Rates - UCERF3
공공데이터포털
,Data show fault-based seismic sources used in the time-independent component of the Uniform California Earthquake Rupture Forecast, Version 3 (UCERF3), which provides authoritative estimates of the magnitude, location, and time-averaged frequency of potentially damaging earthquakes in California. Fault model slip rates are given in millimeters per year. The feature service depicts the surface traces of modeled faults, which are simplified from the CGS – USGS Quaternary Fault and Fold database (https://earthquake.usgs.gov/hazards/qfaults/). For modeled blind fault seismic sources, the traces represent the map-view fault tip projection of the subsurface fault. For additional information regarding modeled faults in UCERF3 please refer to Appendix A of the UCERF3 report (https://pubs.usgs.gov/of/2013/1165/).,For additional information about UCERF3 please see https://www.conservation.ca.gov/cgs/rghm/psha/Pages/sr_228.aspx for the full UCERF3 publication and supporting products.,