The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains outputs of streamflow for each stream segment in the model domain and is based on parameterization with dynamic land cover. The parameters that were allowed to vary were related to dominant land cover type, percent impervious area, and precipitation interception by the plant canopy and snowpack.The PRMS parameters describing vegetation and impervious area were derived from annual estimates of land cover to incorporate land-cover dynamics in the hydrologic simulations (further described in LaFontaine and others, 2019). Simulations were conducted for each of the global circulation models (GCMs) and relative concentration pathways (RCPs) presented in table1_GCMs_used.csv.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains outputs of streamflow for each stream segment in the model domain and is based on parameterization with static land cover. Simulations were conducted for each of the global circulation model (GCMs) and relative concentration pathway (RCP) presented in table1_GCMs_used.csv.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains outputs of streamflow for each stream segment in the model domain and is based on parameterization with static land cover. Simulations were conducted for each of the global circulation model (GCMs) and relative concentration pathway (RCP) presented in table1_GCMs_used.csv.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains outputs of streamflow for each stream segment in the model domain and is based on parameterization with static land cover. Simulations were conducted for each of the global circulation model (GCMs) and relative concentration pathway (RCP) presented in table1_GCMs_used.csv.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains atmospheric forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, for simulating historical streamflow for the period 1950 - 2005.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains atmospheric forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, for simulating historical streamflow for the period 1950 - 2005.

This data release contains inputs for and outputs from hydrologic simulations for the conterminous United States (CONUS) using the Precipitation Runoff Modeling System (PRMS) version 5.1.0 (https://www.usgs.gov/software/precipitation-runoff-modeling-system-prms) and the USGS National Hydrologic Model infrastructure (NHM, Regan and others, 2018). These simulations were developed to provide estimates of the water budget and statistics of streamflow for historical and potential future conditions using atmospheric forcing data from Coupled Model Intercomparison Project phase 5 (CMIP5). Specific file types include: 1) input forcings of minimum air temperature, maximum air temperature, and daily precipitation derived from general circulation models (GCM, table1_GCMs_used.csv), 2) output files of simulated streamflow for each stream segment in the model, 3) GIS files of the model hydrologic response units and stream segments, and 4) a suite of streamflow statistics for each modeled segment. This data release complements data release (https://doi.org/10.5066/P9CVHLMB) which contains historical simulations based on historically observed atmospheric forcings rather than GCM-derived forcings. The same parameter files and model configuration files were used for all model runs and are available in that data release.

This data release contains inputs for and outputs from hydrologic simulations for the conterminous United States (CONUS) using the Precipitation Runoff Modeling System (PRMS) version 5.1.0 (https://www.usgs.gov/software/precipitation-runoff-modeling-system-prms) and the USGS National Hydrologic Model infrastructure (NHM, Regan and others, 2018). These simulations were developed to provide estimates of the water budget and statistics of streamflow for historical and potential future conditions using atmospheric forcing data from Coupled Model Intercomparison Project phase 5 (CMIP5). Specific file types include: 1) input forcings of minimum air temperature, maximum air temperature, and daily precipitation derived from general circulation models (GCM, table1_GCMs_used.csv), 2) output files of simulated streamflow for each stream segment in the model, 3) GIS files of the model hydrologic response units and stream segments, and 4) a suite of streamflow statistics for each modeled segment. This data release complements data release (https://doi.org/10.5066/P9CVHLMB) which contains historical simulations based on historically observed atmospheric forcings rather than GCM-derived forcings. The same parameter files and model configuration files were used for all model runs and are available in that data release.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, using the Representative Concentration Pathway 8.5 for simulating potential future streamflow for the period 2006 - 2100.

The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model infrastructure (NHM; Regan and others, 2018). This child page specifically contains forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, using the Representative Concentration Pathway 8.5 for simulating potential future streamflow for the period 2006 - 2100.