A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature (SST) analysis produced daily on an operational basis by the Oceanographic Modeling and Observation Network (REMO) at Applied Meteorology Laboratory/Federal University of Rio de Janeiro (LMA/UFRJ) using the Barnes sub optimal interpolation (OI) technique on a regional 0.05 degree grid. REMO uses Advanced Very High Resolution Radiometer (AVHRR) data from National Oceanic and Atmospheric Administration (NOAA) satellites series (NOAA 15, NOAA 16, NOAA 17, NOAA 18 and NOAA 19) and Microwave Imager (TMI) data from Tropical Rainfall Measuring Mission (TRMM) which is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA) to generate 0.05 degree daily cloud free blended (infrared and microwave) SST products (approximately 5.5 km). The data lies between latitudes 45 S and 15 N and longitudes 70 W and 15 W region and are fully validated by in situ measurements from eleven buoys of Prediction and Research Moored Array in the Tropical Atlantic (PIRATA). AVHRR is a scanning radiometer capable of detecting energy from land, ocean and atmosphere. It operates with six spectral bands arranged in the regions of visible and infrared region. TRMM was launched in December, 1997, having an orbital inclination of 53 degree and altitude 350 km, an equatorial orbit that ranges from 40 N to 40 S and a spatial resolution of 0.25 degree (~27.75 km). Although infrared AVHRR SST data have high spatial resolution, they are contaminated by cloud cover and aerosols, while lower resolution microwave TMI data are barely influenced by these.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature (SST) analysis produced daily on an operational basis by the Oceanographic Modeling and Observation Network (REMO) at Applied Meteorology Laboratory/Federal University of Rio de Janeiro (LMA/UFRJ) using the Barnes sub optimal interpolation (OI) technique on a regional 0.05 degree grid. REMO uses Advanced Very High Resolution Radiometer (AVHRR) data from National Oceanic and Atmospheric Administration (NOAA) satellites series (NOAA 15, NOAA 16, NOAA 17, NOAA 18 and NOAA 19) and Microwave Imager (TMI) data from Tropical Rainfall Measuring Mission (TRMM) which is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA) to generate 0.05 degree daily cloud free blended (infrared and microwave) SST products (approximately 5.5 km). The data lies between latitudes 45 S and 15 N and longitudes 70 W and 15 W region and are fully validated by in situ measurements from eleven buoys of Prediction and Research Moored Array in the Tropical Atlantic (PIRATA).AVHRR is a scanning radiometer capable of detecting energy from land, ocean and atmosphere. It operates with six spectral bands arranged in the regions of visible and infrared region. TRMM was launched in December, 1997, having an orbital inclination of 53 degree and altitude 350 km, an equatorial orbit that ranges from 40 N to 40 S and a spatial resolution of 0.25 degree (∼27.75 km). Although infrared AVHRR SST data have high spatial resolution, they are contaminated by cloud cover and aerosols, while lower resolution microvwave TMI data are barely influenced by these.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25-degree grid at Remote Sensing Systems. This product uses optimal interpolation (OI) from microwave (MW) sensors including the Global Precipitation Measurement (GPM) Microwave Imager (GMI), the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), the NASA Advanced Microwave Scanning Radiometer-EOS (AMSRE), the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W1 satellite, and WindSat operates on the Coriolis satellite. The through-cloud capabilities of microwave radiometers provide a valuable picture of global sea surface temperature (SST). This analysis does not use any in situ SST data such as drifting buoy SST. Comparing with previous version 4.0 dataset, the version 5.0 has made the updates in several areas, including the diurnal warming model, the sensor-specific error statistics (SSES) for each microwave sensor, the sensor correlation model, and the quality mask.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.09-degree grid at Remote Sensing Systems. This product uses optimal interpolation (OI) from both microwave (MW) sensors including the Global Precipitation Measurement (GPM) Microwave Imager (GMI), the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), the NASA Advanced Microwave Scanning Radiometer-EOS (AMSRE), the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W1 satellite, and WindSat operates on the Coriolis satellite, and infrared (IR) sensors such as the Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA Aqua and Terra platform and the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi-NPP satellite. The through-cloud capabilities of microwave radiometers provide a valuable picture of global sea surface temperature (SST) while infrared radiometers (i.e., MODIS) have a higher spatial resolution. This analysis does not use any in situ SST data such as drifting buoy SST. Comparing with previous version 4.0 dataset, the version 5.0 has made the updates in several areas, including the diurnal warming model, the sensor-specific error statistics (SSES) for each microwave sensor, the sensor correlation model, and the quality mask.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25-degree grid at Remote Sensing Systems. This product uses optimal interpolation (OI) from microwave (MW) sensors including the Global Precipitation Measurement (GPM) Microwave Imager (GMI), the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), the NASA Advanced Microwave Scanning Radiometer-EOS (AMSRE), the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W1 satellite, and WindSat operates on the Coriolis satellite. The through-cloud capabilities of microwave radiometers provide a valuable picture of global sea surface temperature (SST). This analysis does not use any in situ SST data such as drifting buoy SST. Comparing with previous version 4.0 dataset, the version 5.0 has made the updates in several areas, including the diurnal warming model, the sensor-specific error statistics (SSES) for each microwave sensor, the sensor correlation model, and the quality mask.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis at Ifremer/CERSAT (France) using optimal interpolation (OI) on a regional 0.02 degree grid. It provides a daily cloud-free field of foundation sea surface temperature at approximately 2 km resolution (0.02 degree) for the North-Western European shelves. It is generated by merging microwave and infrared satellite sea surface temperature observations including those from the Advanced Very High Resolution Radiometer (AVHRR), the Advanced Along Track Scanning Radiometer (AATSR), the Spinning Enhanced Visible and Infrared Imager (SEVIRI), the Advanced Microwave Scanning Radiometer-EOS (AMSRE), the Tropical Rainfall Measuring Mission Microwave Imager (TMI) and the Geostationary Operational Environmental Satellite (GOES) Imager. The satellite SST observations are intercalibrated using the AATSR sensor as a reference (previously re-calibrated using all available in situ data). The development of the global real-time sea surface temperature at Ifremer/CERSAT is supported by European Commission initially in the frame of MERSEA project.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25-degree grid at Remote Sensing Systems. This product uses optimal interpolation (OI) from microwave (MW) sensors including the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), the NASA Advanced Microwave Scanning Radiometer-EOS (AMSR-E), the WindSat on the Coriolis satellite, the Global Precipitation Measurement (GPM) Microwave Imager (GMI), and the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W1 satellite. These MW sensors are used through the SST production based on the sensor data availability. The through-cloud capabilities of microwave radiometers provide a valuable picture of global sea surface temperature (SST). This analysis does not use any in situ SST data such as drifting buoy SST. Compared with the previous version 5.0 dataset, version 5.1 is processed using updated input files, the sensor-specific error statistics (SSES) for each microwave sensor are updated, and deficiencies in the OI processing have been addressed.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis at Ifremer/CERSAT (France) using optimal interpolation (OI) on a global 0.1 degree grid. It provides a daily cloud-free field of foundation sea surface temperature at approximately 10km resolution (0.1 degree) over the full globe. It is generated by merging microwave and infrared satellite sea surface temperature observations including those from the Advanced Very High Resolution Radiometer (AVHRR), the Advanced Along Track Scanning Radiometer (AATSR), the Spinning Enhanced Visible and Infrared Imager (SEVIRI), the Advanced Microwave Scanning Radiometer-EOS (AMSRE), the Tropical Rainfall Measuring Mission Microwave Imager (TMI) and the Geostationary Operational Environmental Satellite (GOES) Imager. The satellite SST observations are intercalibrated using the AATSR sensor as a reference (previously re-calibrated using all available in situ data). The development of the global real-time sea surface temperature at Ifremer/CERSAT is supported by European Commission initially in the frame of MERSEA project.

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.09-degree grid at Remote Sensing Systems. This product uses optimal interpolation (OI) from both microwave (MW) sensors including the Global Precipitation Measurement (GPM) Microwave Imager (GMI), the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), the NASA Advanced Microwave Scanning Radiometer-EOS (AMSRE), the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W1 satellite, and WindSat operates on the Coriolis satellite, and infrared (IR) sensors such as the Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA Aqua and Terra platform and the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi-NPP satellite. The through-cloud capabilities of microwave radiometers provide a valuable picture of global sea surface temperature (SST) while infrared radiometers (i.e., MODIS) have a higher spatial resolution. This analysis does not use any in situ SST data such as drifting buoy SST. Comparing with previous version 4.0 dataset, the version 5.0 has made the updates in several areas, including the diurnal warming model, the sensor-specific error statistics (SSES) for each microwave sensor, the sensor correlation model, and the quality mask.

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis by the Danish Meteorological Institute (DMI) using an optimal interpolation (OI) approach on a global 0.05 degree grid. The analysis is based upon nighttime GHRSST L2P skin and subskin SST observations from several satellites. The sensors include the Advanced Very High Resolution Radiometer (AVHRR), the Spinning Enhanced Visible and Infrared Imager (SEVIRI), the Advanced Microwave Scanning Radiometer 2 (AMSR2), the Visible Infrared Imager Radiometer Suite (VIIRS), and the Moderate Resolution Imaging Spectroradiometer (MODIS) on Aqua. An ice field from the EUMETSAT OSI-SAF is used to mask out areas with ice. This dataset adheres to the version 2 GHRSST Data Processing Specification (GDS).