이 데이터셋의 설명이 없습니다

이 데이터셋의 설명이 없습니다

이 데이터셋의 설명이 없습니다

Conductivity, temperature and Depth probe was used to collect data from NOAA Ship TOWNSEND CROMWELL. The data were collected from NE Pacific (limit-180) over 20 days duration from June 4-24, 1972 by National Marine Fisheries Service, La Jolla, CA. The data is stored in High-Resolution CTD Data (F022).

The Conductivity, Temperature and Depth (CTD) and other data were collected in NE Pacific (limit-180). Data was collected from NOAA Ship RAINIER. The data was collected over a period spanning from March 23, 1993 to July 31, 1993. Data was submitted in a diskette by Capt. Russell Arnold, Pacific Marine Environmental Laboratory, Seattle, WA. Data has been processed and is available in F022-CTD-Hi Resolution file format of NODC. F022 High-resolution CTD data is collected from high resolution (conductivity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1 m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t) and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals.

Pressure, Temperature, and Salinity (CTD) data, plus sound velocity (cm/sec) data collected during hydrographic surveys conducted by the Pacific Environmental Laboratory (NOAA/PMEL) from NOAA Ship RAINIER between March 18, 1992 and May 14, 1992. Data were collected in the North Pacific Ocean, Gulf of Alaska with a SEACAT STD. Originator's Data was submitted as variable length ASCII files on two diskettes. Files contain header information, including cruise number, ship location and data parameters. Principal Investigator was Lt. John Griffin, Institute: NOAA/PMEL. CTD data were processed and are archived as NODC file type F022.

Data has been processed by NODC to the NODC standard High-Resolution CTD/STD (F022) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Data has been processed by NODC to the NODC standard High-Resolution CTD/STD (F022) format. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

이 데이터셋의 설명이 없습니다