This dataset includes 63 still images extracted from digital video imagery of sediment grab samples, along with laboratory grain size analysis of the sediment grab samples, taken from the mouth of the Columbia River, OR and WA, USA. Digital video was collected in September 2014 in the mouth of the Columbia River, USA, as part of the U.S. Geological Survey Coastal and Marine Geology Program contribution to the Office of Naval Research funded River and Inlets Dynamics experiment (RIVET II). Still images were extracted from the underwater video footage whenever the camera was resting on the sediment bed and individual sediment grains were visible and in focus. The images were used to calculate the calibration curve through auto-correlation regressed against the results of laboratory-determined median grain size (D50) of the grab samples (Barnard, 2007), provided in an accompanying .csv file.

This dataset includes 63 still images extracted from digital video imagery of sediment grab samples, along with laboratory grain size analysis of the sediment grab samples, taken from the mouth of the Columbia River, OR and WA, USA. Digital video was collected in September 2014 in the mouth of the Columbia River, USA, as part of the U.S. Geological Survey Coastal and Marine Geology Program contribution to the Office of Naval Research funded River and Inlets Dynamics experiment (RIVET II). Still images were extracted from the underwater video footage whenever the camera was resting on the sediment bed and individual sediment grains were visible and in focus. The images were used to calculate the calibration curve through auto-correlation regressed against the results of laboratory-determined median grain size (D50) of the grab samples (Barnard, 2007), provided in an accompanying .csv file.

In situ seafloor images were acquired at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, with an underwater camera system between June 5 and June 8, 2021. Between 248 and 427 digital images of the sediment surface were collected at each site with an underwater camera system that was repeatedly lowered to the seabed along a series of 1 km-long transects oriented along the main navigation channel and spaced about 60 m apart. The camera consisted of a FLIR Blackfly BFS-PGE-50S5 camera and 50 mm lens in a waterproof housing that resulted in a field of view of approximately 17 mm and a resolution of 0.00657 mm per pixel when the housing window was flush with the sediment surface. The imagery is provided in .tif format and compressed into .zip archives for each site. Images used for calibration of the automated processing algorithm to determine sediment grain size distributions were different than those used to validate the technique and were provided in separate .zip archives.

In situ seafloor images were acquired at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, with an underwater camera system between June 5 and June 8, 2021. Between 248 and 427 digital images of the sediment surface were collected at each site with an underwater camera system that was repeatedly lowered to the seabed along a series of 1 km-long transects oriented along the main navigation channel and spaced about 60 m apart. The camera consisted of a FLIR Blackfly BFS-PGE-50S5 camera and 50 mm lens in a waterproof housing that resulted in a field of view of approximately 17 mm and a resolution of 0.00657 mm per pixel when the housing window was flush with the sediment surface. The imagery is provided in .tif format and compressed into .zip archives for each site. Images used for calibration of the automated processing algorithm to determine sediment grain size distributions were different than those used to validate the technique and were provided in separate .zip archives.

In situ seafloor images were acquired at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, with an underwater camera system between June 5 and June 8, 2021. Between 248 and 427 digital images of the sediment surface were collected at each site with an underwater camera system that was repeatedly lowered to the seabed along a series of 1 km-long transects oriented along the main navigation channel and spaced about 60 m apart. The camera consisted of a FLIR Blackfly BFS-PGE-50S5 camera and 50 mm lens in a waterproof housing that resulted in a field of view of approximately 17 mm and a resolution of 0.00657 mm per pixel when the housing window was flush with the sediment surface. The imagery is provided in .tif format and compressed into .zip archives for each site. Images used for calibration of the automated processing algorithm to determine sediment grain size distributions were different than those used to validate the technique and were provided in separate .zip archives.

This dataset contains surface sediment grain diameter measurements from in situ seafloor images collected in the lower Columbia River, Washington and Oregon, in 2021. Surface sediment grain diameters were derived from manual measurements (or "point counts") in a subset of images used to calibrate and validate an automated image processing algorithm to determine surface sediment grain size distributions. For each calibration and validation image that was selected, the long and short axis of 100 grains were manually measured. The grain diameter measurements are provided in comma-separated (.csv) format and compressed into separate .zip archives for images used for calibration and validation of the automated image processing technique.

This dataset contains surface sediment grain diameter measurements from in situ seafloor images collected in the lower Columbia River, Washington and Oregon, in 2021. Surface sediment grain diameters were derived from manual measurements (or "point counts") in a subset of images used to calibrate and validate an automated image processing algorithm to determine surface sediment grain size distributions. For each calibration and validation image that was selected, the long and short axis of 100 grains were manually measured. The grain diameter measurements are provided in comma-separated (.csv) format and compressed into separate .zip archives for images used for calibration and validation of the automated image processing technique.

This dataset contains surface sediment grain diameter measurements from in situ seafloor images collected in the lower Columbia River, Washington and Oregon, in 2021. Surface sediment grain diameters were derived from manual measurements (or "point counts") in a subset of images used to calibrate and validate an automated image processing algorithm to determine surface sediment grain size distributions. For each calibration and validation image that was selected, the long and short axis of 100 grains were manually measured. The grain diameter measurements are provided in comma-separated (.csv) format and compressed into separate .zip archives for images used for calibration and validation of the automated image processing technique.

Two 21-day field operations were conducted in 1997 and 1998 in the estuaries and on the inner continental shelf off the northern Oregon and southern Washington coast. These cruises aboard the R/V Corliss were run in order to generate reconnaissance maps of the seafloor geology and the shallow subsurface stratigraphy using sidescan-sonar and seismic-reflection mapping techniques. The 1998 cruise also collected sediment grab samples, bottom photographs, and video images to verify the sidescan-sonar imagery and to document the seafloor geology. The combination of these data with previously collected sediment sample data (Robert, 1974; Nittrouer, 1978; and Smith et. al., 1980) has been used to define the extent and lithology of shelf sediments associated with the Columbia River littoral cell. This work is one component of a larger project studying the erosion of the Washington Oregon coasts and is being coordinated by the U.S. Geological Survey and the Washington State Department of Ecology. The reasons for collecting these data are to provide a regional synthesis of the offshore geology for this project and to support a wide variety of management decisions and to provide a basis for further process-oriented investigations.

This dataset contains surface sediment grain size distributions derived from automated image processing of in situ seafloor images obtained with an underwater camera system at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The surface sediment grain size distribution data are provided in comma-separated text (.csv) format for each site and for data used in calibration and validation of the automated image processing technique.